Bauschinger Effect in Microalloyed Steels: Part I. Dependence on Dislocation-Particle Interaction
Source abstract
Abstract
The Bauschinger effect (yield stress decreasing at the start of reverse deformation after forward prestrain) is an important factor in strength development for cold metal forming technology. In steels, the magnitude of the Bauschinger effect depends on composition, through the presence of microalloy precipitates, and prior processing, through the size and distribution of microalloy precipitates and presence of retained work hardening. In this article, the microstructures of two (Nb- and Nb-V-microalloyed) steel plates, in terms of (Ti,Nb,V,Cu)-rich particle distributions and dislocation densities, have been quantitatively related to the Bauschinger parameters for the same processing conditions. For the 12- to 50-nm effective particle size range, the Bauschinger stress parameter increases with the particle number density and dislocation density increase. The relative influence of these two microstructure parameters is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. P.S. Bate and D.V. Wilson: Acta Metall., 1986, vol. 34 (6), pp. 1097–1105.10.1016/0001-6160(86)90220-8 ↗
2. L.M. Brown: Scripta Metall., 1977, vol. 11, pp. 127–31.10.1016/0036-9748(77)90291-5 ↗
3. T.C. Harrison, R.T. Weiner, and G.D. Fearnehough: J. Iron Steel Inst., 1972, May, pp. 334–36.
4. R.C. Ratnapuli and E.C. Rodrigues: Met. Technol., 1982, vol. 9, pp. 440–45.10.1179/030716982803286313 ↗
5. R.M. Jamieson and J.E. Hood: J. Iron Steel Inst., 1971, Jan., pp. 46–48.
6. K. Nakajima, W. Mizutani, T. Kikuma, and H. Matumoto: Trans. ISIJ, 1975, vol. 15, pp. 1–10.10.2355/isijinternational1966.15.1 ↗
7. J.P. Ormandy, M. Strangwood, and C.L. Davis: Mater. Sci. Technol., 2003, vol. 19, pp. 595–601.10.1179/026708303225010795 ↗
8. K. Han, C.J. Van Tyne, and B.S. Levy: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2379–84.10.1007/s11661-005-0110-7 ↗
9. A.G. Kostryzhev, M. Strangwood, and C.L. Davis: Mater. Technol.: Adv. Perform. Mater., 2007, vol. 22 (3), pp. 166–72.10.1179/175355507X236650 ↗
10. A.G. Kostryzhev, M. Strangwood, and C.L. Davis: Ironmaking and Steelmaking, 2009, vol. 36 (3), pp. 186–92.10.1179/174328109X401532 ↗
11. D. Williams and C.B. Carter: Transmission Electron Microscopy, II—Diffraction, Plenum Press, New York, NY, 1996, pp. 321–23.10.1007/978-1-4757-2519-3 ↗
12. C.L. Davis and M. Strangwood: J. Mater. Sci., 2002, vol. 37, pp. 1083–90.10.1023/A:1014342800399 ↗
13. M. Strangwood and C.L. Davis: Proc. 2nd Int. Conf. on “Thermo-Mechanical Simulation and Processing of Steels,” Ranchi, India, Allied Publishers PVT. Ltd, New Delhi, India, 2008, pp. 453–63.
14. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 97–99.
15. R. Rana, S.B. Singh, and O.N. Mohanty: Mater. Charact., 2008, vol. 59, pp. 969–74.10.1016/j.matchar.2007.08.008 ↗
16. A. Ghosh, S. Das, S. Chatterjee, B. Mishra, and P. Ramachandra Rao: Mater. Sci. Eng. A, 2003, vol. 348, pp. 299–308.10.1016/S0921-5093(02)00735-9 ↗
17. S. Shanmugan, R.D.K. Misra, T. Mannering, D. Panda, and S.G. Jansto: Mater. Sci. Eng. A, 2006, vol. 437, pp. 436–45.10.1016/j.msea.2006.08.007 ↗
18. I. Madariaga, J.L. Romero, and I. Gutierrez: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1003–15.10.1007/s11661-998-1009-x ↗
19. B. Garbarz, J. Marcisz, and J. Wojtas: Mater. Chem. Phys., 2003, vol. 81, pp. 486–89.10.1016/S0254-0584(03)00049-X ↗
20. F. Yin, T. Hanamura, O. Umezawa, and K. Nagai: Mater. Sci. Eng. A, 2003, vol. 354, pp. 31–39.10.1016/S0921-5093(02)00766-9 ↗
21. C.F. Robertson, K. Obrtlik, and B. Marini: J. Nucl. Mater., 2007, vol. 366, pp. 58–69.10.1016/j.jnucmat.2006.12.043 ↗
22. H.G. Hillenbrand, M. Graf, and C. Kalwa: Development and Production of High Strength Pipeline Steels, EUROPIPE GmbH, Ratingen, Germany, 2001, www.europipe.de.
23. A. Abel and H. Muir: Philos. Mag., 1972, vol. 26, pp. 489–504.10.1080/14786437208227444 ↗
24. D.N. Williams: Metall. Trans. A, 1980, vol. 11A, pp. 1629–31.10.1007/BF02654531 ↗