Experimental Investigation and Analytical Prediction of σ-Phase Precipitation in AISI 316L Austenitic Stainless Steel
Source abstract
Abstract
The phase precipitation in industrial AISI 316L stainless steel during aging for up to 80,000 hours between 823 K and 1073 K (550 °C and 800 °C) has been studied using transmission electron microscopy, scanning transmission electron microscopy, and carbon replica energy-dispersive X-ray microanalysis. Three phases were identified: Chromium carbides (M23C6), Laves phase (η), and σ-phase (Fe-Cr). M23C6 carbide precipitation occurred firstly and was followed by the η and σ-phases at grain boundaries when the aging temperature is higher than 873 K (600 °C). Precipitation and growth of M23C6 create chromium depletion zones at the grain boundaries and also retard the σ-phase formation. Thus, the σ-phase is controlled by the kinetic of chromium bulk diffusion and can appear only when the chromium reaches, at grain boundaries and at the M23C6/γ and M23C6/η/γ interfaces, content higher than a critical value obtained by self-healing. An analytical model, based on equivalent chromium content, has been established in this study and successfully validated to predict the time–temperature–precipitation diagram of the σ-phase. The obtained diagram is in good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. G.R. Garcés, J.L. Coze, J.L. Garin, R.L. Mannheim. Scripta Mater. 2004; 50: 651-54.10.1016/j.scriptamat.2003.11.021 ↗
2. C.C. Hsieh, D.Y. Lin, W. Wu. Mater. Sci. Eng. A 2007; 467: 181-89.10.1016/j.msea.2007.02.107 ↗
3. Y.H. Kim, D.J. Lee, J.C. Byun, K.H. Jung, J.I. Kim, H.J. Lee, Y.T. Shin, S.H. Kim, H.W. Lee, Mater. Des. 2011; 32: 330-36.10.1016/j.matdes.2010.06.044 ↗
4. M. Schwind, J. Kallqvist, J.O. Nilsson, J. Agren. Acta Mater. 2000; 48: 2473-81.10.1016/S1359-6454(00)00069-0 ↗
5. F. Liu, Y.H. Hwang, S.W. Nam. Mater. Sci. Eng. A 2008; 484: 418-21.10.1016/j.msea.2006.08.141 ↗
6. A.F. Padilha, D.M. Escriba, E.M. Morris, M. Rieth. J. Nucl. Mater. 2007; 362: 132-38.10.1016/j.jnucmat.2006.12.027 ↗
7. S. Kozuh, M. Gojic, L. Kosec. RMZ-M&G 2007; 54: 331-44.
8. X. Tang. Microsc. Microanal. 2005; 11: 78-79.10.1017/S143192760550374X ↗
9. A.M. Babakr, A. Alahmari, K. Aljumayiah, F. Habiby. JMMCE 2008; 7: 127-45.10.4236/jmmce.2008.72011 ↗
10. H. Sahlaoui, K. Makhlouf, H. Sidhom, J. Philibert. Mater. Sci. Eng. A 2004; 372: 98-108.10.1016/j.msea.2003.12.017 ↗
11. H. Sahlaoui, H. Sidhom, J. Philibert. Acta Mater. 2002; 50: 1383-92.10.1016/S1359-6454(01)00444-X ↗
12. M.E. Nicholson, C.H. Samans, F.J. Shortsleeve. Trans. ASM 1952; 44: 601-20.
13. O. Conejero, M. Palacios, S. Rivera. Eng. Fail. Anal. 2009; 16: 699-704.10.1016/j.engfailanal.2008.06.022 ↗