journal article·2012-01Open access

Ridging Control in Transformable Ferritic Stainless Steels

Javad Mola, Ilchan Jung, Jieon Park, Dongchul Chae, Bruno C. de Cooman

Abstract

An alloy design concept leading to an improved ridging resistance in the transformable ferritic stainless steels is introduced. It is based on achieving a small γ-phase fraction at the ingot soaking temperature. The γ-phase fraction is then increased to a maximum value during the early stages of hot rolling. The nucleation of γ-phase islands in the ferritic matrix increases the fraction of transformed ferrite. The multiplicity of crystallographic orientations resulting from the α→γ and γ→α transformations leads to a pronounced weakening of the as-cast texture and an increased ridging resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. H.J. Shin, J.K. An, S.H. Park, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 4693-706.10.1016/S1359-6454(03)00187-3 ↗
2. S.H. Park, K.Y. Kim, Y.D. Lee, and C.G. Park: ISIJ Int., 2002, vol. 42, pp. 100-05.10.2355/isijinternational.42.100 ↗
3. M. Brochu, T. Yokota, and S. Satoh: ISIJ Int., 1997, vol. 37, pp. 872-77.10.2355/isijinternational.37.872 ↗
4. P.D. Wu, H. Jin, Y. Shi, and D.J. Lloyd: Mater. Sci. Eng. A, 2006, vol. 423, pp. 300-05.10.1016/j.msea.2006.02.043 ↗
5. J.I. Hamada, Y. Matsumoto, F. Fudanoki, and S. Maeda: ISIJ Int., 2003, vol. 43, pp. 1989-98.10.2355/isijinternational.43.1989 ↗
6. H.C. Chao: J. Am. Soc. Metal., 1967, vol. 60, pp. 37-50.
7. R.N. Wright: Metall. Trans., 1972, vol. 3, pp. 83-91.10.1007/BF02680588 ↗
8. H. Takechi, H. Kato, T. Sunami, and T. Nakayama: J. Jpn. Inst. Met., 1967, vol. 31, pp. 717-23.10.2320/jinstmet1952.31.6_717 ↗
9. O. Engler, M.Y. Huh, and C.N. Tomé: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3127-39.10.1007/s11661-005-0084-5 ↗
10. Y. Itoh, T. Okajima, H. Maede, and K. Tashiro: J. Iron Steel Jpn., 1982, vol. 22, pp. 223-29.
11. T. Tsuchiyama, R. Hirota, K. Fukunaga, and S. Takaki: ISIJ Int., 2005, vol. 45, pp. 923-29.10.2355/isijinternational.45.923 ↗
12. M.Y. Huh and O. Engler: Mater. Sci. Eng. A, 2001, vol. 308, pp. 74-87.10.1016/S0921-5093(00)01995-X ↗
13. I. Jung: Influence of the Cold Rolling Conditions on the Texture Development and Formability of Ti Stabilized 18pct Cr Ferritic Stainless Steel, POSTECH, Pohang, South Korea, 2009.10.4028/www.scientific.net/SSP.160.129 ↗
14. M.Y. Huh, J.H. Lee, S.H. Park, O. Engler, and D. Raabe: Steel Res. Int., 2005, vol. 76, pp. 797-806.10.1002/srin.200506098 ↗
15. H.G. Kang, M.Y. Huh, S.H. Park, and O. Engler: Steel Res. Int., 2008, vol. 79, pp. 489-96.10.1002/srin.200806157 ↗
16. J. Mola, D. Chae, and B.C. De Cooman: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1429–40.10.1007/s11661-010-0206-6 ↗
17. D. Peckner and I.M. Bernstein: Handbook of Stainless Steels, McGraw-Hill, New York, NY, 1977.
18. T.H.O. Lee, S.J. Kim, and Y.C. Jung: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1713-23.10.1007/s11661-998-0332-6 ↗
19. T.F. Liu, S.W. Peng, Y.L. Lin, and C.C. Wu: Metall. Trans. A, 1990, vol. 21A, pp. 567-74.10.1007/BF02671929 ↗
20. K.H. Kuo and C.L. Jia: Acta Metall., 1985, vol. 33, pp. 991-96.10.1016/0001-6160(85)90193-2 ↗
21. T. Sourmail: Mater. Sci. Technol., 2001, vol. 17, pp. 1-14.10.1179/026708301101508972 ↗
22. A.F. Padilha and P.R. Rios: ISIJ Int., 2002, vol. 42, pp. 325-37.10.2355/isijinternational.42.325 ↗
23. M.H. Biglari, C.M. Brakman, and E.J. Mittemeijer: Phil. Mag. A, 1995, vol. 72, pp. 1281-99.10.1080/01418619508236255 ↗
24. V. Massardier, V. Guétaz, J. Merlin, and M. Soler: Mater. Sci. Eng. A, 2003, vol. 355, pp. 299-310.10.1016/S0921-5093(03)00080-7 ↗
25. M. Sennour and C. Esnouf: Acta Mater., 2003, vol. 51, pp. 943-57.10.1016/S1359-6454(02)00498-6 ↗
26. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, pp. 221-86.10.1179/imr.1988.33.1.221 ↗
27. B.C. De Cooman, J.G. Speer, I.Y. Pyshmintsev, and N. Yoshinaga: Materials Design, The Key to Modern Steel Products, GRIPS Media, Bad Harzburg, Germany, 2007.
28. T.S. Hummelshøj, T.L. Christiansen, and M.A.J. Somers: Scripta Mater., 2010, vol. 63, pp. 761-63.10.1016/j.scriptamat.2010.05.031 ↗
29. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59-60.10.1016/0001-6160(59)90170-1 ↗
30. S.H. Kim, H.K. Moon, T. Kang, and C.S. Lee: Mater. Sci. Eng. A, 2003, vol. 356, pp. 390-98.10.1016/S0921-5093(03)00152-7 ↗
31. J. Mola: Unpublished research, POSTECH, Pohang, South Korea, 2011.
32. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Chapman & Hall, London, UK, 1992.10.1007/978-1-4899-3051-4 ↗
33. D. Raabe and K. Lücke: Scripta Metall. Mater., 1992, vol. 26, pp. 1221-26.10.1016/0956-716X(92)90567-X ↗
34. J.S. Hinton and J.H. Beynon: ISIJ Int., 2007, vol. 47, pp. 1465-74.10.2355/isijinternational.47.1465 ↗
35. I. Jung, J. Mola, D. Chae, and B.C. de Cooman: Steel Res. Int., 2010, vol. 81, pp. 1089-96.10.1002/srin.201000125 ↗
36. T. Siegmund, E. Werner, and F.D. Fischer: Mater. Sci. Eng. A, 1993, vol. 169, pp. 125-34.10.1016/0921-5093(93)90607-G ↗
37. H.J. McQueen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 345-62.10.1007/s11661-002-0096-3 ↗
38. J. Mola, D. Chae, and B.C. De Cooman: Sol. St. Phen., 2010, vol. 160, pp. 153-58.10.4028/www.scientific.net/SSP.160.153 ↗
39. K. Kimura, A. Yamamoto, T. Takeshita, and J. Harase: Nippon Steel Tech. Rep., 1996, vol. pp. 11–16.
40. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Maney Publishing, London, UK, 1997.