journal article·2014-10

Effects of M 23C6 on the High-Temperature Performance of Ni-Based Welding Material NiCrFe-7

Wenlin Mo, Shanping Lu, Dianzhong Li, Yiyi Li

Publisher page

Abstract

The effects of M 23C6 (M = Cr, Fe) on the high-temperature performance of the NiCrFe-7 welding rods and weld metals were studied by high-temperature tensile tests and microstructure analysis. M 23C6 at the grain boundaries (GBs) has a cube-on-cube coherence with one grain in the NiCrFe-7 weld metals, and the adjacent M 23C6 has the coherence relationship with the same grain. The grain with a coherent M 23C6 has a Cr-depletion region. The number and size of M 23C6 particles can be adjusted by heat treatment and alloying. There are two temperatures [T E1: 923 K to 1083 K (650 °C to 810 °C) and T E2: 1143 K to 1203 K (870 °C to 930 °C)] at which the GBs and grains of the NiCrFe-7 welding rod have equal strength during the high-temperature tensile test. When the temperatures are between T E1 and T E2, the strength of the GBs is lower than that of the grains, and the tensile fractures are intergranular. When the temperatures are below T E1 or over T E2, the strength of the GBs is higher than that of the grains, and the tensile fractures are dimples. M 23C6 precipitates at the GBs, which deteriorates the ductility of the welding rods at temperature between T E1 and T E2. M 23C6 aggravates ductility-dip-cracking (DDC) in the weld metals. The addition of Nb and Ti can form MX (M = Ti, Nb, X = C, N), fix C in grain, decrease the initial precipitation temperature of M 23C6, and mitigate the precipitation of M 23C6, which is helpful for minimizing DDC in the weld.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. F. Huang, J. Q. Wang, E. H. Han and W. Ke: J. Mater. Sci. Technol., 2012, vol. 28, pp. 562-568.10.1016/S1005-0302(12)60098-X ↗
2. Z. Zhang, J. Wang, E. H. Han and W. Ke: J. Mater. Sci. Technol., 2012, vol. 28, pp. 785-792.10.1016/S1005-0302(12)60131-5 ↗
3. T. Y. Kuo and H. T. Lee: Mater. Sci. Eng. A, 2002, vol. 338, pp. 202-212.10.1016/S0921-5093(02)00063-1 ↗
4. A. J. Ramirez and J. C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 259-271.10.1016/j.msea.2004.03.074 ↗
5. A. J. Ramirez and J. C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 245-258.10.1016/j.msea.2004.03.075 ↗
6. C. L. White, J. H. Schneibel and R. A. Padgett: Metall. Trans. A, 1983, vol. 14, pp. 595-610.10.1007/BF02643776 ↗
7. E. Shapiro and G. Dieter: Metall. Trans., 1970, vol. 1, pp. 1711-1719.10.1007/BF02642021 ↗
8. M. Arkoosh and N. Fiore: Metall. Trans., 1972, vol. 3, pp. 2235-2240.10.1007/BF02643237 ↗
9. A.J. Ramirez and C.M. Garzon: Hot Cracking Phenomena in Welds II, 2nd ed., Springer, Berlin, 2008, pp. 427-453.10.1007/978-3-540-78628-3_22 ↗
10. E.A. Torres, F.G. Peternella, R. Caram, and A. J. Ramírez: In-situ Studies with Photons, Neutrons and Electrons Scattering, Springer, Berlin, 2010, pp. 27–39.10.1007/978-3-642-14794-4_3 ↗
11. R. Qin, Z. Duan, and G. He: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4661–70.10.1007/s11661-013-1833-5 ↗
12. S.J. Norton: Master Thesis, Ohio State University, 2003.
13. J.S. Unfried, E.A. Torres, and A.J. Ramirez: Hot Cracking Phenomena in Welds III, 3rd ed., Springer, Berlin, 2011, pp. 295–315.10.1007/978-3-642-16864-2_15 ↗
14. W. Wu, P. Y. Chen and H. Jiang: China Weld. J., 2009, vol. 2, pp. 61-64.
15. K. Nishimoto, K. Saida, H. Okauchi and K. Ohta: Sci. Technol. Weld. Joining, 2006, vol. 11, pp. 471-479.10.1179/174329306X94318 ↗
16. K. Saida, Y. Nomoto, H. Okauchi, H. Ogiwara and K. Nishimoto: Sci. Technol. Weld. Joining, 2012, vol. 17, pp. 1-8.10.1179/1362171810Y.0000000004 ↗
17. K. Saida, A. Taniguchi, H. Okauchi, H. Ogiwara and K. Nishimoto: Sci. Technol. Weld. Joining, 2011, vol. 16, pp. 553-560.10.1179/1362171811Y.0000000026 ↗
18. T.E. Capobianco and M.E. Hanson: No. LM-05K074, Knolls Atomic Power Laboratory (KAPL), Niskayuna, NY, 2005.
19. D. J. Lee, Y. S. Kim, Y. T. Shin, E. C. Jeon, S. H. Lee, H. J. Lee, S. K. Lee, J. H. Lee and H. W. Lee: Met. Mater. Int., 2010, vol. 16, pp. 813-817.10.1007/s12540-010-1019-2 ↗
20. A.J. Ramirez and J.C. Lippold: Hot Cracking Phenomena in Welds, 1st ed., Springer, Berlin, 2005, pp. 19–41.10.1007/3-540-27460-X_2 ↗
21. N.E. Nissley and J.C. Lippold: Trends in Welding Research, Proceedings, 2006, pp. 327–32.
22. M. G. Collins, A. J. Ramirez and J. C. Lippold: Weld. J., 2004, vol. 83, pp. 39S-49S.
23. G. A. Young, T. E. Capobianco, M. A. Penik, B. W. Morris and J. J. McGee: Weld. J., 2008, vol. 87, pp. 31s-43s.
24. Z. Lei, R. Chellali, R. Schlesiger, D. Baither and G. Schmitz: Scr. Mater., 2011, vol. 65, pp. 428-31.10.1016/j.scriptamat.2011.05.024 ↗
25. Y. H. Yang, J. J. Yu, X. F. Sun, T. Jin, H. R. Guan and Z. Q. Hu: Mater. Charact., 2012, vol. 66, pp. 30-37.10.1016/j.matchar.2012.02.004 ↗
26. U. Krupp, W. M. Kane, C. Laird and C. J. McMahon: Mater. Sci. Eng. A, 2004, vol. 387, pp. 409-413.10.1016/j.msea.2004.05.053 ↗
27. V. Laporte and A. Mortensen: Int. Mater. Rev., 2009, vol. 54, pp. 94-116.10.1179/174328009X392967 ↗
28. S. Fujiwara and K. Abiko: Le Journal de Physique IV, 1995, vol. 5, pp. 295-300.
29. S. Onaka, M. Kato and R. Tanaka: J. Japan Inst. Metals, 1986, vol. 50, p. 141.10.2320/jinstmet1952.50.2_141 ↗
30. N. E. Nissley and J. C. Lippold: Weld. J., 2008, vol. 87, pp. 257s-264s.
31. N. E. Nissley and J. C. Lippold: Weld. J., 2009, vol. 88, pp. 131s-140s.
32. F. F. Noecker and J. N. DuPont: Weld. J., 2009, vol. 88, pp. 62s-77s.
33. X. C. Liu, H. W. Zhang and K. Lu: Science, 2013, vol. 342, pp. 337-340.10.1126/science.1242578 ↗
34. Q. Liu: Ultramicroscopy, 1995, vol. 60, pp. 81-89.10.1016/0304-3991(95)00049-7 ↗
35. K. Stiller: Surf. Sci., 1992, vol. 266, pp. 402-408.10.1016/0039-6028(92)91053-E ↗
36. H. Li, S. Xia, B. X. Zhou, W. J. Chen and C. L. Hu: J. Nucl. Mater., 2010, vol. 399, pp. 108-113.10.1016/j.jnucmat.2010.01.008 ↗
37. Y. S. Lim, J. S. Kim, H. P. Kim and H. D. Cho: J. Nucl. Mater., 2004, vol. 335, pp. 108-114.10.1016/j.jnucmat.2004.07.038 ↗
38. K. Kaneko, T. Fukunaga, K. Yamada, N. Nakada, M. Kikuchi, Z. Saghi, J. S. Barnard and P. A. Midgley: Scr. Mater., 2011, vol. 65, pp. 509-512.10.1016/j.scriptamat.2011.06.010 ↗
39. H. U. Hong and S. W. Nam: Mater. Sci. Eng. A, 2002, vol. 332, pp. 255-261.10.1016/S0921-5093(01)01754-3 ↗
40. E. A. Trillo and L. E. Murr: J. Mater. Sci., 1998, vol. 33, pp. 1263-1271.10.1023/A:1004390029071 ↗
41. M. A. Mangan, M. V. Kral and G. Spanos: Acta Mater., 1999, vol. 47, pp. 4263-4274.10.1016/S1359-6454(99)00323-7 ↗
42. D. Tytko, P. P. Choi, J. Klower, A. Kostka, G. Inden and D. Raabe: Acta Mater., 2012, vol. 60, pp. 1731-1740.10.1016/j.actamat.2011.11.020 ↗
43. R. Hu, G. H. Bai, J. S. Li, J. Q. Zhang, T. B. Zhang and H. Z. Fu: Mater. Sci. Eng. A, 2012, vol. 548, pp. 83-88.10.1016/j.msea.2012.03.092 ↗
44. L. Zheng, S. Jiao, J. Dong and M. Zhang: J. Mech. Eng., 2010, vol. 46, pp. 54-59.
45. T. Angeliu and G. Was: Metall. Trans. A, 1990, vol. 21A, pp. 2097-2107.10.1007/BF02647868 ↗
46. M. Thuvander and K. Stiller: Mater. Sci. Eng. A, 2000, vol. 281, pp. 96-103.10.1016/S0921-5093(99)00741-8 ↗
47. W. L. Mo, S. P. Lu, D. Z. Li and Y. Y. Li: Mater. Sci. Eng. A, 2013, vol. 582, pp. 326-337.10.1016/j.msea.2013.06.038 ↗
48. N. E. Nissley and J. C. Lippold: Weld. J., 2003, vol. 82, pp. 355s-364s.
49. P. Venkiteswaran, M. Bright and D. Taplin: Mater. Sci. Eng., 1973, vol. 11, pp. 255-268.10.1016/0025-5416(73)90090-6 ↗
50. W. L. Mo, S. P. Lu, D. Z. Li and Y. Y. Li: J. Mater. Sci. Technol., 2013, vol. 29, pp. 458-466.10.1016/j.jmst.2013.03.015 ↗
51. H. Miura, S. Watanabe, T. Sakai and M. Kato: Interface Sci., 1997, vol. 4, pp. 329-338.10.1007/BF00240251 ↗
52. M. G. Collins and J. C. Lippold: Weld. J., 2003, vol. 82, pp. 288s-295s.
53. M. G. Collins, A. J. Ramirez and J. C. Lippold: Weld. J., 2003, vol. 82, pp. 348S-354S.
54. J. Q. Chen, H. Lu, C. Yu, J. M. Chen and M. L. Zhang: Sci. Technol. Weld. Joining, 2013, vol. 18, pp. 346-353.10.1179/1362171813Y.0000000113 ↗
55. B. C. Peng, H. X. Zhang, J. Hong, J. Q. Gao, H. Q. Zhang, Q. J. Wang and J. F. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3625-3629.10.1016/j.msea.2011.01.079 ↗
56. X. Li: Master Thesis, Graduate University of Chinese Academy of Sciences, 2012.