Temperature-Dependent Misfit Stress in Gamma Double Prime Strengthened Ni-Base Superalloys
Source abstract
Abstract
Abstract Misfit stresses in the γ″-strengthened Ni-base superalloy Inconel 718 were calculated from the measured constrained misfit strain using Eshelby’s inclusion method. The constrained misfit strains of the γ″ precipitates were measured using neutron diffraction at various temperatures with the aid of the stress-induced variant selection method. Eshelby tensor was calculated using the expressions for the case of anisotropic matrix given by Mura. Results show the presence of significant compressive misfit stresses in the γ″ precipitates with an anisotropic distribution, namely 3.0 GPa along the habit plane and 1.7 GPa along the plane normal direction at room temperature, and 2.0 and 1.2 GPa at 664 °C. The decrease in misfit stresses was due to the decrease in stiffness and the different coefficients of thermal expansion of the γ and γ″ phases. The average internal stresses in the γ matrix due to lattice misfit were found to be ~ 329 MPa at room temperature and ~ 186 MPa at 664 °C in tension. The possibility of relieving such high levels of misfit stresses in precipitates by loss of coherency during continued growth of precipitates is also discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Roger C. Reed: The superalloys: fundamentals and applications. 1st. ed. (Cambridge University Press, Cambridge, 2006).
2. Haël Mughrabi, Acta Mater. 2014, vol. 81, pp. 21-29.10.1016/j.actamat.2014.08.005 ↗
3. J. M. Oblak, D. F. Paulonis and D. S. Duvall, Metall. Trans. 1974, vol. 5, p. 143.10.1007/BF02644342 ↗
4. R. Cozar and A. Pineau, Scr. Metall. 1973, vol. 7, pp. 851-854.10.1016/0036-9748(73)90277-9 ↗
5. C. Slama, C. Servant and G. Cizeron, J. Mater. Res. 1997, vol. 12, pp. 2298-2316.10.1557/JMR.1997.0306 ↗
6. D. M. Collins, L. Yan, E. A. Marquis, L. D. Connor, J. J. Ciardiello, A. D. Evans and H. J. Stone, Acta Mater. 2013, vol. 61, pp. 7791-7804.10.1016/j.actamat.2013.09.018 ↗
7. N. Zhou, D. C. Lv, H. L. Zhang, D. McAllister, F. Zhang, M. J. Mills and Y. Wang, Acta Mater. 2014, vol. 65, pp. 270-286.10.1016/j.actamat.2013.10.069 ↗
8. J. D. Eshelby, Proc. R. Soc. London Ser. A 1957, vol. 241, pp. 376-396.10.1098/rspa.1957.0133 ↗
9. P. J. Withers, W. M. Stobbs and O. B. Pedersen, Acta Metall. 1989, vol. 37, pp. 3061-3084.10.1016/0001-6160(89)90341-6 ↗
10. T. Mura: Micromechanics of Defects in Solids. (Springer Netherlands, 1987).10.1007/978-94-009-3489-4 ↗
11. A. J. Allen, M. A. M. Bourke, S. Dawes, M. T. Hutchings and P. J. Withers, Acta Metall. Mater. 1992, vol. 40, pp. 2361-2373.10.1016/0956-7151(92)90155-8 ↗
12. M. R. Daymond and M. E. Fitzpatrick, Metall. Mater. Trans. A 2006, vol. 37, pp. 1977-1986.10.1007/s11661-006-0140-9 ↗
13. J. D. Robson, Acta Mater. 2016, vol. 121, pp. 277-287.10.1016/j.actamat.2016.09.022 ↗
14. H. J. Stone, T. M. Holden and R. C. Reed, Acta Mater. 1999, vol. 47, pp. 4435-4448.10.1016/S1359-6454(99)00314-6 ↗
15. E. M. Francis, B. M. B. Grant, J. Quinta da Fonseca, P. J. Phillips, M. J. Mills, M. R. Daymond and M. Preuss, Acta Mater. 2014, vol. 74, pp. 18-29.10.1016/j.actamat.2014.04.028 ↗
16. R. Y. Zhang, H. L. Qin, Z. N. Bi, J. Li, S. Paul, T. L. Lee, B. Nenchev, J. Zhang, S. Kabra, J. F. Kelleher and H. B. Dong, Metall. Mater. Trans. A 2019, vol. 50, pp. 5421–5432.10.1007/s11661-019-05393-9 ↗
17. P. E. Aba-Perea, T. Pirling, P. J. Withers, J. Kelleher, S. Kabra and M. Preuss, Mater. Des. 2016, vol. 89, pp. 856-863.10.1016/j.matdes.2015.09.152 ↗
18. Y. C. Lin, X.-Y. Jiang, S.-C. Luo, and D.-G. He, Mater. Des. 2018, vol. 139, pp. 16-2410.1016/j.matdes.2017.10.065 ↗
19. M. Sundararaman, P. Mukhopadhyay and S. Banerjee, Metall. Trans. A 1992, vol. 23, pp. 2015-2028.10.1007/BF02647549 ↗
20. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J. Y. Guédou, J. F. Uginet and P. Héritier, Mater. Sci. Eng. A 2008, vol. 486, pp. 117-122.10.1016/j.msea.2007.08.046 ↗
21. I. J. Moore, M. G. Burke and E. J. Palmiere, Acta Mater. 2016, vol. 119, pp. 157-166.10.1016/j.actamat.2016.08.027 ↗
22. D. Mukherji, R. Gilles, B. Barbier, D. Del Genovese, B. Hasse, P. Strunz, T. Wroblewski, H. Fuess and J. Rösler, Scr. Mater. 2003, vol. 48, pp. 333-339.10.1016/S1359-6462(02)00456-6 ↗
23. Brian H. Toby and Robert B. Von Dreele, J. Appl. Crystallogr. 2013, vol. 46, pp. 544-549.10.1107/S0021889813003531 ↗
24. D Dye, S. M. Roberts, P. J. Withers and R. C. Reed, J. Strain Anal. Eng. Des. 2000, vol. 35, pp. 247-259.10.1243/0309324001514396 ↗
25. Thorsten Manns and Berthold Scholtes, Mater. Sci. Forum 2011, vol. 681, pp. 417-419.10.4028/www.scientific.net/MSF.681.417 ↗
26. N. Kinoshita and T. Mura, Phys. Status Solidi A 1971, vol. 5, pp. 759-768.10.1002/pssa.2210050332 ↗
27. S. C. Lin and T. Mura, Phys. Stat. Sol. A 1973, vol. 15, pp. 281-285.10.1002/pssa.2210150131 ↗
28. T. Mori and K. Tanaka, Acta Metall. 1973, vol. 21, pp. 571-574.10.1016/0001-6160(73)90064-3 ↗
29. R. Lawitzki, S. Hassan, L. Karge, J. Wagner, D. Wang, J. von Kobylinski, C. Krempaszky, M. Hofmann, R. Gilles and G. Schmitz, Acta Mater. 2019, vol. 163, pp. 28-39.10.1016/j.actamat.2018.10.014 ↗
30. R.Y. Zhang, H. L. Qin, Z. N. Bi, J. Li, S. Paul, T. L. Lee, B. Nenchev, J. Zhang, S. Kabra, J. Kelleher and H.B. Dong, Scr. Mater. 2019 [Submitted].
31. Hailong Qin, Zhongnan Bi, Hongyao Yu, Guang Feng, Ruiyao Zhang, Xia Guo, Hai Chi, Jinhui Du and Ji Zhang, Mater. Sci. Eng. A 2018, vol. 728, pp. 183-195.10.1016/j.msea.2018.05.016 ↗
32. G. C. Weatherly, Philos. Mag. 1968, vol. 17, pp. 791-799.10.1080/14786436808223030 ↗
33. M. Sundararaman, P. Mukhopadhyay and S. Banerjee, Metall. Trans. A 1988, vol. 19, pp. 453-465.10.1007/BF02649259 ↗
34. Y. Ji, Y. Lou, M. Qu, J.D. Rowatt, F. Zhang, T.W. Simpson, L.-Q. Chen, Metall. Mater. Trans. A 2016, vol. 47, pp. 3235-3247.10.1007/s11661-016-3480-0 ↗
35. A. Pineau, Acta Metall. 1976, vol. 24, pp. 559-564.10.1016/0001-6160(76)90101-2 ↗
36. S. Harjo, Y. Tomota and M. Ono, Acta Mater. 1998, vol. 47, pp. 353-362.10.1016/S1359-6454(98)00300-0 ↗
37. K. Van Acker, J. Root, P. Van Houtte and E. Aernoudt, Acta Mater. 1996, vol. 44, pp. 4039-4049.10.1016/S1359-6454(96)00051-1 ↗
38. A. J. Porter, R. C. Ecob and R. A. Ricks, J Microscopy 1983, vol. 129, pp. 327-336.10.1111/j.1365-2818.1983.tb04189.x ↗
39. Hailong Qin, Zhongnan Bi, Hongyao Yu, Guang Feng, Jinhui Du and Ji Zhang, J. Alloys Compd. 2018, vol. 740, pp. 997-1006.10.1016/j.jallcom.2018.01.030 ↗
40. L. Xiao, D. L. Chen and M. C. Chaturvedi, Scr. Mater. 2005, vol. 52, pp. 603-607.10.1016/j.scriptamat.2004.11.023 ↗
41. G. C. Weatherly and R. B. Nicholson, Philos. Mag. 1968, vol. 17, pp. 801-831.10.1080/14786436808223031 ↗
42. J. P. Collier, A. O. Selius and J. K. Tien, In Superalloys 1988, ed. S. Reichman, D. N. Duhl, G. Maurer, S. Antolovich and Lund C. (The Metallurgical Society: 1988), pp 43–52.
43. R. Cozar and A. Pineau, Metall. Mater. Trans. B 1973, vol. 4, pp. 47-59.10.1007/BF02649604 ↗
44. P. M. Mignanelli, N. G. Jones, E. J. Pickering, O. M. D. M. Messé, C. M. F. Rae, M. C. Hardy and H. J. Stone, Scr. Mater. 2017, vol. 136, pp. 136-140.10.1016/j.scriptamat.2017.04.029 ↗