journal article·2018-04

Theoretical Conversions of Different Hardness and Tensile Strength for Ductile Materials Based on Stress–Strain Curves

Hui Chen, Li-Xun Cai

Publisher page

Abstract

Based on the power-law stress–strain relation and equivalent energy principle, theoretical equations for converting between Brinell hardness (HB), Rockwell hardness (HR), and Vickers hardness (HV) were established. Combining the pre-existing relation between the tensile strength (σ b ) and Hollomon parameters (K, N), theoretical conversions between hardness (HB/HR/HV) and tensile strength (σ b ) were obtained as well. In addition, to confirm the pre-existing σ b -(K, N) relation, a large number of uniaxial tensile tests were conducted in various ductile materials. Finally, to verify the theoretical conversions, plenty of statistical data listed in ASTM and ISO standards were adopted to test the robustness of the converting equations with various hardness and tensile strength. The results show that both hardness conversions and hardness-strength conversions calculated from the theoretical equations accord well with the standard data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Y.T. Cheng and C.M. Cheng: Surf. Coat. Technol., 2000, vol. 133, pp. 417–24.10.1016/S0257-8972(00)00896-3 ↗
2. Y.G. Jung, B.R. Lawn, M. Martyniuk et al.: J. Mater. Res., 2004, vol. 19, pp. 3076–80.10.1557/JMR.2004.0380 ↗
3. X. Cheng, K.W. Putz, C.D. Wood, and L.C. Brinson: Macromol. Rapid Commun., 2015, vol. 36, pp. 391–97.10.1002/marc.201400487 ↗
4. E.G. Herbert, G.M. Pharr, W.C. Oliver, and J.L. Hay: Thin Solid Films, 2001, vol. 398, pp. 331–35.10.1016/S0040-6090(01)01439-0 ↗
5. V. Lorenzo, C. Acebo, X. Ramis, and À. Serra: Progr. Org. Coat., 2016, vol. 92, pp. 16–22.10.1016/j.porgcoat.2015.11.017 ↗
6. C. Moussa, X. Hernot, O. Bartier, G. Delattre, and G. Mauvoisin: J. Mater. Sci., 2014, vol. 49, pp. 592–603.10.1007/s10853-013-7739-1 ↗
7. T.W. Capehart and Y.T. Cheng: J. Mater. Res., 2003, vol. 18, pp. 827–32.10.1557/JMR.2003.0113 ↗
8. N. Chollacoop, M. Dao, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 3713–29.10.1016/S1359-6454(03)00186-1 ↗
9. Y.P. Cao, X.Q. Qian, J. Lu, and Z.H. Yao: J. Mater. Res., 2005, vol. 20, pp. 1194–1206.10.1557/JMR.2005.0147 ↗
10. H. Chen and L.X. Cai: Acta Mater., 2016, vol. 121, pp. 181–89.10.1016/j.actamat.2016.09.008 ↗
11. N.K. Mukhopadhyay and P. Paufler: Int. Mater. Rev., 2006, vol. 51, pp. 209–45.10.1179/174328006X102475 ↗
12. D. Tabor: J. Inst. Met., 1951, vol. 79, pp. 1–18.
13. E.R. Petty: Metallurgic, 1957, vol. 56, pp. 231–35.
14. E.R. Petty: Alum. Lab., 1962.
15. I. Brooks, P. Lin, G. Palumbo, G.D. Hibbard, and U. Erb: Mater. Sci. Eng., 2008, vol. 491, pp. 412–19.10.1016/j.msea.2008.02.015 ↗
16. J.R. Cahoon: Metall. Trans., 1972, vol. 3, pp. 3040–40.10.1007/BF02652880 ↗
17. J.R. Cahoon, W.H. Broughton, and A.R. Kutzak: Metall. Trans., 1971, vol. 2, pp. 1979–83.10.1007/BF02913433 ↗
18. Y.L. Shen and N. Chawla: Mater. Sci. Eng., 2001, vol. 297, pp. 44–47.10.1016/S0921-5093(00)01256-9 ↗
19. Y.L. Shen, J.J. Williams, G. Piotrowski, N. Chawla, and Y.L. Guo: Acta Mater., 2001, vol. 49, pp. 3219–29.10.1016/S1359-6454(01)00226-9 ↗
20. Y.L. Shen, E. Fishencord, and N. Chawla: Scripta Mater., 2000, vol. 42, pp. 427–32.10.1016/S1359-6462(99)00368-1 ↗
21. S. Matsuoka, N.K. Gakkai Ronbunshu, and A. Hen: Trans. Jpn. Soc. Mech. Eng. Part A, 2004, vol. 70, pp. 1535–41.
22. E.J. Pavlina and C.J. Van Tyne: J. Mater. Eng. Performance, 2008, vol. 17, pp. 888–93.10.1007/s11665-008-9225-5 ↗
23. JSMS: Soc. Mater. Sci. Jpn., 1998, vol. 1 (2.3).
24. ASTM International E140-12be1, ASTM International, West Conshohocken, PA, 2013.
25. Y. Wei and J.W. Hutchinson: J. Mech. Phys. Solids, 2003, vol. 51, pp. 2037–56.10.1016/j.jmps.2003.09.011 ↗
26. Z. Yuan, F. Li, B. Chen, and F. Xue: J. Mater. Res., 2014, vol. 29, pp. 1317–25.10.1557/jmr.2014.120 ↗
27. P. Zhang, S.X. Li, and Z.F. Zhang: Mater. Sci. Eng., 2011, vol. 529, pp. 62–73.10.1016/j.msea.2011.08.061 ↗
28. Y.T. Cheng and C.M. Cheng: Mater. Sci. Eng., 2004, vol. 44, pp. 91–149.10.1016/j.mser.2004.05.001 ↗
29. H. Lan and T.A. Venkatesh: Philos. Mag., 2014, vol. 94, pp. 35–55.10.1080/14786435.2013.839889 ↗
30. A.C. Fischer-Cripps, P. Karvankova, and S. Vepřek: Surf. Coat. Technol., 2006, vol. 200, pp. 5645–54.10.1016/j.surfcoat.2005.07.096 ↗
31. A.C. Fischer-Cripps: Surf. Coat. Technol., 2016, vol. 291, pp. 314–17.10.1016/j.surfcoat.2016.02.063 ↗
32. D. Labonte, A.K. Lenz, and M.L. Oyen: Acta Biomater., 2017, vol. 57, pp. 373–83.10.1016/j.actbio.2017.05.034 ↗
33. H. Chen and L.X. Cai: Appl. Math. Model., 2017, vol. 52, pp. 664–71.10.1016/j.apm.2017.07.042 ↗
34. T.S. Byun, J.H. Hong, F.M. Haggag, K. Farrell, and E.H. Lee: Int. J. Pres. Ves. Pip., 1997, vol. 74, pp. 231–38.10.1016/S0308-0161(97)00114-2 ↗
35. J. Li, F. Li, X. Ma, Q. Wang, J. Dong, and Z. Yuan: Mater. Design, 2015, vol. 67, pp. 623–30.10.1016/j.matdes.2014.11.010 ↗
36. H. Chen and L.X. Cai: Mater. Today Commun., 2017, vol. 13C, pp. 210–20.10.1016/j.mtcomm.2017.10.006 ↗
37. “Standard Test Methods for Tension Testing of Metallic Materials,” Standard A, ASTM E8/E8M-13a. 2013.
38. “ISO 18265:2013-Metallic Materials–Conversion of Hardness Values,” ISO [Online]. Available from http://www.iso.org/iso/catalogue_detail.htm?csnumber=53810.