journal article·2016-01

Contributions of ε and α′ TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel

Andreas Weiß, Heiner Gutte, Javad Mola

Publisher page

Abstract

The deformation-induced processes by tensile loading of X5CrNi18-10 austenitic stainless steel in the temperature range of 77 K to 413 K (−196 °C to 140 °C) were investigated. The results were presented in the form of stress–temperature-transformation (STT) and strain–temperature-transformation (DTT) diagrams. The thermodynamic stability of the austenite with respect to the e- and α′-martensite transformations was reflected in the STT and DTT diagrams. Furthermore, conclusions could be drawn from the transformation diagrams about the kinetics of stress- and strain-induced martensitic transformations. The diagrams laid foundations for the development of a new method of quantitative determination of strength and elongation contributions by means of induced and often overlapping deformation processes in the austenite. In this context, the plastic strains contributed by the glide and shearing of austenite were quantified and presented in connection with the e and α′ TRansformation-Induced Plasticity effects. Each deformation process was shown to have made a contribution to the strength and ductility, with a magnitude proportional to its dominance. The summation of such contributions provided the tensile strength and the uniform elongation of the steel. In other words, tensile strength and uniform elongation could be derived from a rule of mixtures. The newly proposed method was capable of explaining the anomalous temperature dependence of uniform elongation in the alloy investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1897–1904.
2. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1905–14.
3. S. Cotes, M. Sade, and A. Fernandez Guillermet: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1957–69.10.1007/BF02670667 ↗
4. S.M. Cotes, A. Fernández Guillermet, and M. Sade: Metall. Mater. Trans. A, 2004, vol. 35, pp. 83–91.10.1007/s11661-004-0111-y ↗
5. H. Gutte and A. Weiß: Habilitation, TU Bergakademie Freiberg, Freiberg, 2011.
6. A.P. Miodownik: Calphad, 1978, vol. 2, pp. 207–26.10.1016/0364-5916(78)90010-X ↗
7. H. Schumann: Arch Eisenhuettenw, 1969, vol. 40, pp. 1027–37.
8. H.J. Eckstein and A. Weiß: Neue Hütte, 1992, vol. 37, pp. 438–44.
9. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A, 2012, vol. 552, pp. 514–22.10.1016/j.msea.2012.05.080 ↗
10. J.F. Breedis and L. Kaufman: Metall. Trans., 1971, vol. 2, pp. 2359–71.10.1007/BF02814874 ↗
11. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 391–400.10.1007/BF02642042 ↗
12. G. Blanc, R. Tricot, and R. Castro: Mem Sci Rev Met., 1973, vol. 70, pp. 527–41.
13. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245–53.10.1179/030634582790427316 ↗
14. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
15. A. Kovalev, M. Wendler, A. Jahn, A. Weiß, and H. Biermann: Adv. Eng. Mater., 2013, vol. 15, pp. 609–17.10.1002/adem.201200340 ↗
16. D. Fahr: Metall. Trans., 1971, vol. 2, pp. 1883–92.10.1007/BF02913420 ↗
17. N. Tsuchida, Y. Morimoto, T. Tonan, Y. Shibata, K. Fukaura, and R. Ueji: ISIJ Int., 2011, vol. 51, pp. 124–29.10.2355/isijinternational.51.124 ↗
18. J. Talonen: Helsinki University of Technology, 2007.
19. W. Bleck: Int. Conf. TRIP-Aided High Strength Ferr. Alloys, Ghent, 2002, pp. 13–24.
20. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
21. A.S. Hamada, L.P. Karjalainen, R.D.K. Misra, and J. Talonen: Mater. Sci. Eng. A, 2013, vol. 559, pp. 336–44.10.1016/j.msea.2012.08.108 ↗
22. A. Weiß, P.R. Scheller, and Gutte: Steel Grips, 2003, vol. 1, pp. 284–88.
23. A. Weiß, H. Gutte, and P.R. Scheller: Steel Res. Int., 2006, vol. 77, pp. 727–32.10.1002/srin.200606454 ↗
24. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6, pp. 1345–51.10.1007/BF02641927 ↗
25. C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 8, pp. 1901–6.10.1007/BF02646563 ↗
26. T.S. Byun: Acta Mater., 2003, vol. 51, pp. 3063–71.10.1016/S1359-6454(03)00117-4 ↗
27. M. Okayasu, H. Fukui, H. Ohfuji, and T. Shiraishi: Mater. Sci. Technol., 2013, vol. 30, pp. 301–8.10.1179/1743284713Y.0000000353 ↗
28. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
29. S. Martin: TU Bergakademie Freiberg, Freiberg, 2013.
30. M. Wendler, A. Weiß, L. Krüger, J. Mola, A. Franke, A. Kovalev, and S. Wolf: Adv. Eng. Mater., 2013, vol. 15, pp. 558–65.10.1002/adem.201200318 ↗
31. N. Tsuchida, T. Kawahata, E. Ishimaru, and A. Takahashi: Tetsu–Hagane, 2013, vol. 99, pp. 517–23.10.2355/tetsutohagane.99.517 ↗
32. J.E. Wittig, M. Pozuelo, J.a. Jiménez, and G. Frommeyer: Steel Res. Int., 2009, vol. 80, pp. 66–70.
33. M. Pozuelo, J. E. Wittig, J. A. Jiménez, and G. Frommeyer: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1826–34.10.1007/s11661-009-9863-8 ↗
34. T.S. Byun, N. Hashimoto, and K. Farrell: Acta Mater., 2004, vol. 52, pp. 3889–99.10.1016/j.actamat.2004.05.003 ↗
35. S.J. Kim, T.H. Lee, and C.S. Oh: Steel Res. Int., 2009, vol. 80, pp. 467–72.
36. A. Kovalev, A. Jahn, A. Weiß, S. Wolf, and P. R. Scheller: Steel Res. Int., 2012, vol. 83, pp. 576–83.10.1002/srin.201100267 ↗
37. B.C. De Cooman and J.G. Speer: Fundamentals of Steel Product Physical Metallurgy, Association for Iron and Steel Technology, Warrendale, 2011.
38. A. Weidner, A. Müller, A. Weiss, and H. Biermann: Mater. Sci. Eng. A, 2013, vol. 571, pp. 68–76.10.1016/j.msea.2013.02.008 ↗
39. J.B. Seol, J.E. Jung, Y.W. Jang, and C.G. Park: Acta Mater., 2013, vol. 61, pp. 558–78.10.1016/j.actamat.2012.09.078 ↗
40. M. Hauser, J. Mola, and A. Weiß: in HMnS 2014, Aachen, 2014, pp. 117–20.
41. P.L. Mangonon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–86.10.1007/BF02642003 ↗
42. X.S. Yang, S. Sun, X.L. Wu, E. Ma, and T.Y. Zhang: Sci. Rep., 2014, vol. 4, p. 6141.10.1038/srep06141 ↗
43. C. Ye, S. Suslov, D. Lin, and G.J. Cheng: Philos. Mag., 2012, vol. 92, pp. 1369–89.10.1080/14786435.2011.645899 ↗