journal article·2016-07Open access

Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures

Z. Chen, R. Lin Peng, J. Moverare, P. Avdovic, J. M. Zhou, S. Johansson

Abstract

The current study focused on the surface integrity issues associated with broaching of Inconel 718 and the structural stability of the broached specimen at high temperatures, mainly involving the microstructural changes and residual stress relaxation. The broaching operation was performed using similar cutting conditions as that used in turbo machinery industries for machining fir-tree root fixings on turbine disks. Thermal exposure was conducted at 723 K, 823 K, and 923 K (450 °C, 550 °C, and 650 °C) for 30, 300, and 3000 hours, respectively. Surface cavities and debris dragging, sub-surface cracks, high intensity of plastic deformation, as well as the generation of tensile residual stresses were identified to be the main issues in surface integrity for the broached Inconel 718. When a subsequent heating was applied, surface recrystallization and α-Cr precipitation occurred beneath the broached surface depending on the applied temperature and exposure time. The plastic deformation induced by the broaching is responsible for these microstructural changes. The surface tension was completely relaxed in a short time at the temperature where surface recrystallization occurred. The tensile layer on the sub-surface, however, exhibited a much higher resistance to the stress relief annealing. Oxidation is inevitable at high temperatures. The study found that the surface recrystallization could promote the local Cr diffusion on the broached surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Surface Treatment and Residual Stress · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. D.F. Paulonis, J.M. Oblak, and D.S. Duvall: Trans. Quart. ASM, 1969, vol. 62, pp. 611-622.
2. J.W. Brooks and P.J. Bridges: Superalloys, pp. 33-42, TMS, Warrendale, 1988.
3. A. Oradei-Basile and J. F. Radavich: Superalloys 718, 625 and Various Derivatives, pp. 325-335, TMS, Warrendale, 1991.10.7449/1991/Superalloys_1991_325_335 ↗
4. X. Xie, G. Wang, J. Dong, C. Wu, J. Radavich, G. Shen, and B.A. Lindsley: Superalloys 718, 625 and Various Derivatives, pp. 399-410, TMS, Warrendale, 2001.10.7449/2001/Superalloys_2001_399_410 ↗
5. L. Jian, C.Y. Yuh, and M. Farooque: Corros. Sci., 2000, vol. 42, pp. 1573-1585.10.1016/S0010-938X(00)00011-1 ↗
6. L. Geng, Y. Na, and N. Park: Mater. Des., 2007, vol. 28, pp. 978-981.10.1016/j.matdes.2005.11.020 ↗
7. G.A. Greene and C.C. Finfrock: Oxid. Met., 2001, vol. 55, pp. 505-521.10.1023/A:1010359815550 ↗
8. D. Ulutan and T. Ozel: Int. J. Mach. Tools Manuf., 2011, vol. 51, pp. 250-280.10.1016/j.ijmachtools.2010.11.003 ↗
9. E.O. Ezugwu, Z.M. Wang, and C.L. Okeke: Tribol. Trans., 1999, vol. 42, pp. 353-360.10.1080/10402009908982228 ↗
10. V. Bushlya, J.M. Zhou, F. Lenrick, P. Avdovic, and J.E. Ståhl: Procedia Engineering, 2011, vol. 19, pp. 60-66.10.1016/j.proeng.2011.11.080 ↗
11. M. Imran, P.T. Mativenga, A. Gholinia, and P.J. Withers: Int. J. Adv. Manuf. Technol., 2011, vol. 55, pp. 465-476.10.1007/s00170-010-3062-z ↗
12. A.M. Wusatowska-Sarnek, B. Dubiel, A. Czyrska-Filemonowicz, P.R. Bhowal, N.B. Salah, and J.E. Klemberg-Sapieha: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3813-3825.10.1007/s11661-011-0779-8 ↗
13. R.L. Peng, J.M. Zhou, S. Johansson, A. Bellinius, V. Bushlya, and J.E. Ståhl: HTM Journal of Heat Treatment and Materials, 2014, vol. 69, pp. 46-53.10.3139/105.110211 ↗
14. A.R.C. Sharman, J.I. Hughes, and K. Ridgway: J. Mater. Process. Technol., 2006, vol. 173, pp. 359-367.10.1016/j.jmatprotec.2005.12.007 ↗
15. A.R.C. Sharman, J.I. Hughes, and K. Ridgway: J. Mater. Process. Technol., 2015, vol. 216, pp. 123-132.10.1016/j.jmatprotec.2014.09.002 ↗
16. L. Witek: Eng. Failure Anal., 2006, vol. 13, pp. 9-17.10.1016/j.engfailanal.2004.12.028 ↗
17. S.P. Mo, D.A. Axinte, T.H. Hyde, and N.N.Z. Gindy: J. Mater. Process. Technol., 2005, vol. 160, pp. 382-389.10.1016/j.jmatprotec.2004.06.026 ↗
18. S. Gierlings and M. Brockmann: Advanced Materials Research, 2013, vol. 769, pp. 139-146.10.4028/www.scientific.net/AMR.769.139 ↗
19. D.A. Axinte and N. Gindy: Wear, 2003, vol. 254, pp. 370-382.10.1016/S0043-1648(03)00003-6 ↗
20. N.F. Suchkov and V.N. Latyshev: Machines Tooling, 1973, vol. 44, pp. 49-50.
21. D. Axinte: Int. J. Mach. Tools Manuf., 2007, vol. 47, pp. 2182-2188.10.1016/j.ijmachtools.2007.04.006 ↗
22. V. Sajeev, L. Vijayaraghavan, and U.R.K. Rao: Int. J. Mech. Eng. Educ., 2000, vol. 28, pp. 88-92.10.7227/IJMEE.28.1.7 ↗
23. F. Klocke, P. Vogtel, S. Gierlings, D. Lung, and D. Veselovac: Prod. Eng., 2013, vol. 7, pp. 593-600.10.1007/s11740-013-0483-1 ↗
24. R.J. Kamaladasa and Y.N. Picard: Microscopy, 2010, pp. 1583–90.
25. I.C. Noyan and J.B. Cohen: Residual stress measurement by diffraction and interpretation, pp. 117-130, Springer-Verlag New York Inc., New York, 1986.
26. J.A. Bailey: Wear, 1977, vol. 42, pp. 297-303.10.1016/0043-1648(77)90059-X ↗
27. M.C. Shaw: Metal Cutting Principles, pp. 432-479, Oxford University Press, New York, 2005.
28. B.J. Griffiths: J. Tribol., 1987, vol. 109, pp. 525-530.10.1115/1.3261495 ↗
29. J.M. Zhou, V. Bushlya, R.L. Peng, and J.E. Ståhl: Appl. Mech. Mater., 2012, vol. 117, pp. 1681-1688.
30. J. Barry and G. Byrne: Mater. Sci. Eng. A, 2002, vol. 325, pp. 356-364.10.1016/S0921-5093(01)01447-2 ↗
31. K. Jacobus, R.E. DeVor, and S.G. Kapoor: J. Manuf. Sci. Eng., 2000, vol. 122, pp. 20-31.10.1115/1.538906 ↗
32. P.S. Prevéy: Residual Stress in Design, Process and Materials Selections, pp. 11-19, ASM Metals Park, OH, 1987.
33. N.A. Abukhshim, P.T. Mativenga, and M.A. Sheikh: Int. J. Mach. Tools Manuf., 2006, vol. 46, pp. 782-800.10.1016/j.ijmachtools.2005.07.024 ↗
34. L.M. Clarebrough, M.E. Hargreaves, and G.W. West: Proceedings of the Royal Society of London, Series A, Mathematical and Physical and Engineering Sciences, 1955, vol. 232, pp. 252-270.10.1098/rspa.1955.0216 ↗
35. O. Vöhringer: Advances in Surface Treatments, Technology-Applications-Effects, Pergamon Press, Oxford, 1987, vol. 4, pp. 367-396.
36. Z. Bi, J. Dong, M. Zhang, L. Zheng, and X. Xie: Int. J. Miner. Metall. Mater., 2010, vol. 17, pp. 312-317.10.1007/s12613-010-0310-z ↗
37. Z. Chen, R.L. Peng, P. Avdovic, J.M. Zhou, J. Moverare, F. Karlsson, and S. Johansson: MATEC Web of Conferences, vol. 14, no. 08002, pp. 1–6, EDP Sciences, 2014.10.1051/matecconf/20141408002 ↗
38. J.F. Radavich: Superalloys 718, 625, 706 and Various Derivatives, pp. 409-415, TMS, 1997.10.7449/1997/Superalloys_1997_409_415 ↗
39. X.J. Pang, D.J. Dwyer, M. Gao, P. Valerio, and R.P. Wei: Scr. Mater., 1994, vol. 31, pp. 345-350.10.1016/0956-716X(94)90294-1 ↗
40. P. Lin, G. Palumbo, U. Erb, and K.T. Aust: Scr. Mater., 1995, vol. 33, pp. 1387-1392.10.1016/0956-716X(95)00420-Z ↗
41. D. Farkas: J. Phys. Condens. Matter, 2000, vol. 12, pp. R497.10.1088/0953-8984/12/42/201 ↗
42. T.K. Hirsch, A.D.S. Rocha, F.D. Ramos, and T.R. Strohaecker: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3523-3530.10.1007/s11661-004-0189-2 ↗