Evolution of Microstructure and Mechanical Properties of Thermomechanically Processed Ultrahigh-Strength Steel
Source abstract
Abstract
In the present study, low carbon microalloyed ultrahigh-strength steel was manufactured on a pilot scale. Transformation of the aforesaid steel during continuous cooling was assessed. The steel sample was thermomechanically processed followed by air cooling and water quenching. Variation in microstructure and mechanical properties at different finish rolling temperatures (FRTs) was studied. A mixture of granular bainite and bainitic ferrite along with interlath and intralath precipitation of (Ti, Nb)CN particles is the characteristic microstructural feature of air-cooled steel. On the other hand, lath martensitic structure along with a similar type of microalloying precipitates of air-cooled steels is obtained in the case of water-quenched steel also. The best combination of strength (1440 to 1538 MPa) and ductility (11 to 16 pct) was achieved for the selected range of FRTs of water-quenched steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. K.A. Taylor and S.S. Hansen: Metall. Trans. A, 1990, vol. 21A, pp. 1697–08.10.1007/BF02672586 ↗
2. R.K. Weiss and S.W. Thompson: in Physical Metallurgy of Direct-Quenched Steels, K.A. Taylor, S.W. Thompson, and F.B. Fletcher, eds., TMS, Warrendale, PA, 1992, pp. 107–38.
3. T. Koseki, K. Amano, M. Imanaka, C. Shiga, and S. Ueda: in Physical Metallurgy of Direct-Quenched Steels, K.A. Taylor, S.W. Thompson, and F.B. Fletcher, eds., TMS, Warrendale, PA, 1992, pp. 297–10.
4. I. Kozasu: in Thermomechanical Processing of Steels and Other Materials, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 47–55.
5. C. Ouchi: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 542–53.10.2355/isijinternational.41.542 ↗
6. S. Akhlaghi and D.G. Ivey: Can. Metall. Q., 2002, vol. 41, pp. 111–19.10.1179/cmq.2002.41.1.111 ↗
7. E.J. Czyryca: Key Eng. Mater., 1993, vols. 84–85, pp. 491–20.10.4028/www.scientific.net/KEM.84-85.491 ↗
8. C.I. Garcia, A.J. DeArdo, E. Raykin, and J.D. Defilippi: in High Performance Steels for Structural Applications, ASM INTERNATIONAL, Materials Park, OH, 1995, pp. 155–60.
9. Steel Plate, Structural High Yield Strength (HY-130), Military Specification MIL-S-24371B (SH), Aug. 2, 1989.
10. A.M. Hall: Introduction to Today’s Ultrahigh-Strength Structural Steels, ASTM International, West Conshohocken, PA, 1973, pp. 1–6.
11. F.B. Pickering: Physical Metallurgy and the Design of Steel, Applied Science Publishers Ltd., London, 1978, pp. 127–62.
12. M. Miller: Image J. Software, URL: http://rsb.info.nih.gov/ij.
13. Document IX-537-67, International Institute of Welding (IIW), Chicago, IL, 1967.
14. F.B. Pickering: Microalloying ‘75, Union Carbide Corp., New York, NY, 1977, pp. 9–31.
15. A. Ghosh, S. Das, S. Chatterjee, B. Mishra, and P. Ramachandra Rao: Mater. Sci. Eng., 2003, vol. A348, pp. 299–308.10.1016/S0921-5093(02)00735-9 ↗
16. A. Ghosh, S. Das, and S. Chatterjee: Mater. Sci. Technol., 2005, vol. 21, pp. 325–33.10.1179/174328405X27043 ↗
17. A. Ghosh, B. Mishra, S. Das, and S. Chatterjee: Mater. Sci. Eng., 2005, vol. A396, pp. 320–32.10.1016/j.msea.2005.01.050 ↗
18. ASM Metals Handbook, vol. 1, Properties and Selection: Iron; Steels and High Performance alloys, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1995, pp. 389–423.
19. M. Prikryl, A. Kroupa, G.C. Weatherly, and S.V. Subramanian: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1149–65.10.1007/BF02649854 ↗
20. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, pp. 161–82.
21. T. Gladman, D. Dulien, and D.I. McIvoy: in Microalloying ‘75, Union Carbide Corporation, New York, NY, 1977, pp. 32–58.
22. S.S. Hansen, J.B. Vander Sande, and M. Cohen: Metall. Trans. A, 1980, vol. 11A, pp. 387–402.10.1007/BF02654563 ↗
23. R.A.P. Djaic and J.J. Jonas: J. Iron Steel Inst., 1972, vol. 210, pp. 256–61.
24. H.L. Andrade, M.G. Akben, and J.J. Jonas: Metall. Trans. A, 1983, vol. 14A, pp. 1967–77.10.1007/BF02662364 ↗
25. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557–71.10.1007/BF02649815 ↗
26. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1493–1507.10.1007/BF02672564 ↗
27. T. Tanaka, N. Tabata, and T. Hatomura: Microalloying ‘75, Union Carbide Corporation, New York, NY, 1977, pp. 107–19.
28. H.J. Leber, C.I. Garcia, E.J. Palmiere, and A.J. DeArdo: Processing, Microstructure and Properties of HSLA Steel, TMS, Warrendale, PA, 1988, pp. 425–33.
29. E.J. Czyryca and R.E. Link: David Taylor Research Center Report No. DTRC-SME-88/64, David Taylor Research Center, Annapolis, MD, Jan. 1990.
30. S.F. Medina, M. Chapa, P. Valles, A. Quispe, and M.I. Vega: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 930–36.10.2355/isijinternational.39.930 ↗
31. T. Nonaka, K. Goto, H. Taniguchi, and K. Yamazaki: Nippon Steel Technical Report No. 88, Nippon Steel, Tokyo, Japan, July 2003, pp. 13–15.
32. C.J. Smithells: Metals Reference Book, Butterworth & Co., London, 1976, pp. 1171–75.