journal article·2013-12

A Highly Fatigue-Resistant Zr-Based Bulk Metallic Glass

Steven E. Naleway, Rawley B. Greene, Bernd Gludovatz, Neil K. N. Dave, Robert O. Ritchie, Jamie J. Kruzic

Publisher page

Abstract

The strength-normalized fatigue endurance strength of the bulk metallic glass (BMG) Zr52.5Cu17.9Ni14.6Al10Ti5 (Vitreloy 105) has been reported to be the highest for any BMG; however, to date, there has been no explanation of why this material is so much better than other Zr-based compositions. In this study, the fatigue-crack growth behavior of Zr52.5Cu17.9Ni14.6Al10Ti5 was compared in ambient air vs dry nitrogen environment. The excellent fatigue life behavior is attributed to a relatively high fatigue threshold (ΔKTH ≈ 2 MPa√m) and a lack of sensitivity to environmental effects on fatigue-crack growth in ambient air, as compared to other Zr-based BMGs. Fatigue life experiments conducted in ambient air confirmed the excellent fatigue life properties with a 107-cycle endurance strength of ~0.24 of the ultimate tensile strength; however, it was also found that casting porosity, even in limited amounts, could reduce this endurance strength by as much as ~60 pct. Overall, the BMG Zr52.5Cu17.9Ni14.6Al10Ti5 appears to have excellent strength and fatigue properties and should be considered as a prime candidate material for future applications where good mechanical fatigue resistance is required.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. C. J. Byrne and M. Eldrup: Science 2008, vol. 321, pp. 502–03.10.1126/science.1158864 ↗
2. M. F. Ashby and A. L. Greer: Scripta Mater. 2006, vol. 54, pp. 321–26.10.1016/j.scriptamat.2005.09.051 ↗
3. J. Schroers: JOM 2005, vol. 57, pp. 35–39.10.1007/s11837-005-0093-2 ↗
4. C. J. Gilbert, J. M. Lippmann and R. O. Ritchie: Scripta Mater. 1998, vol. 38, pp. 537–42.10.1016/S1359-6462(97)00522-8 ↗
5. M. L. Morrison, R. A. Buchanan, P. K. Liaw, B. A. Green, G. Y. Wang, C. Liu and J. A. Horton: Mater. Sci. Eng. A 2007, vol. 467, pp. 190–97.10.1016/j.msea.2007.05.066 ↗
6. G. Y. Wang, P. K. Liaw and M. L. Morrison: Intermetallics 2009, vol. 17, pp. 579–90.10.1016/j.intermet.2009.01.017 ↗
7. S. L. Philo and J. J. Kruzic: Scripta Mater. 2010, vol. 62, pp. 473–76.10.1016/j.scriptamat.2009.12.014 ↗
8. J. J. Kruzic: Metall. Mater. Trans. A 2011, vol. 42A, pp. 1516–23.10.1007/s11661-010-0413-1 ↗
9. C. J. Gilbert, V. Schroeder and R. O. Ritchie: Metall. Mater. Trans. A 1999, vol. 30A, pp. 1739–53.10.1007/s11661-999-0173-y ↗
10. M. E. Launey, R. Busch and J. J. Kruzic: Acta Mater. 2008, vol. 56, pp. 500–10.10.1016/j.actamat.2007.10.007 ↗
11. S. L. Philo, J. Heinrich, I. Gallino, R. Busch and J. J. Kruzic: Scripta Mater. 2011, vol. 64, pp. 359–62.10.1016/j.scriptamat.2010.10.042 ↗
12. ASTM Standard E647, 2008e1: Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM International, West Conshohocken, PA, U.S.A., 2008, DOI: 10.1520/E0647-08E01, http://www.astm.org.10.1520/E0647-08E01 ↗
13. X. H. Lin, W. L. Johnson and W. K. Rhim: Mater. Trans. JIM 1997, vol. 38, pp. 473–77.10.2320/matertrans1989.38.473 ↗
14. J. J. Kruzic, R. M. Cannon and R. O. Ritchie: J. Am. Ceram. Soc. 2005, vol. 88, pp. 2236–45.10.1111/j.1551-2916.2005.00434.x ↗
15. D.C. Maxwell: Report No. AFWAL-TR-87-4046, Air Force Wright Aeronautical Laboratories, 1987.
16. M. E. Launey, R. Busch and J. J. Kruzic: Scripta Mater. 2006, vol. 54, pp. 483–87.
17. P. C. Paris, M. P. Gomez and W. P. Anderson: Trend Eng. 1961, vol. 13, pp. 9–14.
18. A.J. McEvily and R.P. Wei: in Corrosion Fatigue: Chemistry, Mechanics and Microstructure, O. Devereux, A.J. McEvily, and R.W. Staehle, eds., National Association of Corrosion Engineers, Houston, TX/Storrs, CT, 1972, pp. 381–95.
19. S. Suresh: Fatigue of Materials. 2nd ed. (Cambridge University Press, Cambridge, 1998).10.1017/CBO9780511806575 ↗
20. V. Schroeder and R. O. Ritchie: Acta Mater. 2006, vol. 54, pp. 1785–94.10.1016/j.actamat.2005.12.006 ↗
21. C. T. Liu, L. Heatherly, D. S. Easton, C. A. Carmichael, J. H. Schneibel, C. H. Chen, J. L. Wright, M. H. Yoo, J. A. Horton and A. Inoue: Metall. Mater. Trans. A 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗
22. J. H. Schneibel, J. A. Horton and P. R. Munroe: Metall. Mater. Trans. A 2001, vol. 32A, pp. 2819–25.10.1007/s11661-001-1032-7 ↗
23. M. L. Morrison, R. A. Buchanan, P. K. Liaw, B. A. Green, G. Y. Wang, C. T. Liu and J. A. Horton: Mater. Sci. Eng. A 2007, vol. 467A, pp. 198–206.10.1016/j.msea.2007.03.106 ↗
24. K. M. Flores, W. L. Johnson and R. H. Dauskardt: Scripta Mater. 2003, vol. 49, pp. 1181–87.10.1016/j.scriptamat.2003.08.020 ↗
25. M. E. Launey, D. C. Hofmann, W. L. Johnson and R. O. Ritchie: Proc. Natl. Acad. Sci. U. S. A. 2009, vol. 106, pp. 4986–91.10.1073/pnas.0900740106 ↗
26. J. W. Qiao, E. W. Huang, G. Y. Wang, H. J. Yang, W. Liang, Y. Zhang and P. K. Liaw: Mater. Sci. Eng. A 2013, vol. 563, pp. 101–05.10.1016/j.msea.2012.11.060 ↗