journal article·2015-05Open access

Microstructure Characterization and Thermal Analysis of Aluminum Alloy B206 During Solidification

N. Haghdadi, A. B. Phillion, D. M. Maijer

Abstract

The solidification kinetics of a high strength B206 aluminum casting alloy as a function of cooling rates between 1 and 15 K/min has been characterized through a combination of differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and optical microscopy. Three different peaks were detected in the DSC analysis, which corresponded to the nucleation of an α-Al solid solution, an Al-Cu-Fe intermetallic, and the eutectic phases. The presence of these phases was confirmed using a coupled SEM–energy dispersive spectroscopy analysis. The α-Al nucleation temperature was found to be independent of cooling rate while the eutectic and the intermetallic formation temperatures were depressed by up to 20 K (20 °C). The evolution of the fraction solid, particularly during the solidification of α-Al was also affected by the cooling rate in such a way that slower cooling was accompanied by a higher fraction solid at a given temperature. Concurrently, microscopy was used in order to quantify the variation in secondary dendrite arm spacing with cooling rate for use in numerical simulations of casting processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. D. Carle, B. Gordon, Mater. Des. 20 (1999) 267.10.1016/S0261-3069(99)00003-5 ↗
2. S. Das, W. Yin, JOM 59 (2007) 83.10.1007/s11837-007-0027-2 ↗
3. L. Backerud, C. Guocai, T. Jarmo, AFS 2 (1990) 266.
4. J.F. Major, G.K. Sigworth, Trans. AFS 114 (2006) 117.
5. F. D’Elia, C. Ravindran, D. Sediako, Can. Metal. Quart. 53 (2014) 151.10.1179/1879139513Y.0000000119 ↗
6. M. Manivannan, D.O. Northwood, and J.H. Sokolowski: 3rd International Conference on Integrity, Reliability and Failure, Porto/Portugal, 2009.
7. F. D’Elia, C. Ravindran, Trans. Indian Inst. Metals 62 (2009) 315.10.1007/s12666-009-0072-3 ↗
8. H. Kamali, M. Emamy, A. Razaghian, Mater. Sci. Eng. A 590 (2014) 161.10.1016/j.msea.2013.10.032 ↗
9. H.K. Kamga, D. Larouche, M. Bournane, A. Rahem, Metal. Mater. Trans. A 41 (2010) 2844.10.1007/s11661-010-0293-4 ↗
10. K. Liu, X. Cao, X.G. Chen, Metal. Mater. Trans. A 42 (2011) 2004.10.1007/s11661-010-0578-7 ↗
11. E.M. Elgallad, X.G. Chen, Mater. Sci. Eng. A 556 (2012) 783.10.1016/j.msea.2012.07.064 ↗
12. D.G. Eskin, Q. Du, D. Ruvalcaba, L. Katgerman, Mater. Sci. Eng. A 405 (2005) 1.10.1016/j.msea.2005.05.105 ↗
13. M.A. Talamantes-Silva, A. Rodríguez, J. Talamantes-Silva, S. Valtierra, R. Colás, Metal. Mater. Trans. B 39 (2008) 911.10.1007/s11663-008-9204-0 ↗
14. K. Liu, X. Cao, X.G. Chen, J. Mater. Sci. 47 (2012) 4290.10.1007/s10853-012-6279-4 ↗
15. H. Iwasaki, T. Mori, M. Mabuchi, K. Higashi, Acta Mater. 46 (1998) 6351.10.1016/S1359-6454(98)00330-9 ↗
16. H.B. Dong, M.R.M. Shin, E.C. Kurum, H. Cama, J.D. Hunt, Fluid Phase Equilibr. 212 (2003) 199.10.1016/S0378-3812(03)00257-7 ↗
17. H.B. Dong, R. Brooks, Mater. Sci. Eng. A 413 (2005) 480.10.1016/j.msea.2005.09.016 ↗
18. N. D’Souza, M. Lekstrom, H.J. Dai, B.A. Shollock, H. B. Dong, Mater. Sci. Technol. 23 (2007) 1085.10.1179/174328407X213224 ↗
19. N. D’Souza, H.B. Dong, Scripta Mater. 56 (2007) 41.10.1016/j.scriptamat.2006.08.060 ↗
20. N. D’Souza, H. B. Dong, Mater. Sci. Technol. 27 (2011) 325.10.1179/026708309X12506933873189 ↗
21. U.R. Kattner, K.W. Moon, and J.H. Perepezko: US Department of Commerce, Technology Administration, National Institute of Standards and Technology, 2006.
22. L. Backerud, Solidification characteristics of aluminum alloys. American foundrymen’s Society, Des Plains, IL, 1986.
23. M.A. Talamantes-Silva, A. Rodriguez, J. Talamantes-Silva, S. Valtierra, R. Colás, Mater. Charac. 59 (2008) 1434.10.1016/j.matchar.2008.01.005 ↗
24. K. Liu, X. Cao, X.G. Chen, Metal. Mater. Trans. B 43 (2012) 1231.10.1007/s11663-012-9694-7 ↗
25. Q.G. Wang, C. J. Davidson, J. Mater. Sci. 36 (2001) 739.10.1023/A:1004801327556 ↗
26. D. Larouche, C. Laroche, M. Bouchard, Acta Mater. 51 (2003) 2161.10.1016/S1359-6454(03)00003-X ↗
27. S. Thompson, S.L. Cockcroft, M.A. Wells, Mater. Sci. Technol. 20 (2004) 194.10.1179/026708304225011199 ↗
28. H.K. Kamga, D. Larouche, M. Bournane, A. Rahem, Mater. Sci. Eng. A 527 (2010) 7413.10.1016/j.msea.2010.08.025 ↗
29. J.A. Sarreal, G.J. Abbaschian, Metal. Trans. A 17 (1986) 2063.10.1007/BF02645003 ↗
30. S. Nafisi, D. Emadi, R. Ghomashchi, Mater. Sci. Eng. A 507 (2009) 87.10.1016/j.msea.2008.11.052 ↗
31. M.C. Flemings, Solidification Processing, McGraw-Hill, NY, USA, 1974.10.1007/BF02643923 ↗
32. J.A. Horwath, L.F. Mondolfo, Acta Metal. 10 (1962) 1037.10.1016/0001-6160(62)90072-X ↗
33. A.B. Michael, M.B. Bever. Trans. Metall. Soc. AIME (1954) 200:47.
34. M. Solari, H. Biloni, J. Cryst. Growth 49 (1980) 451.10.1016/0022-0248(80)90119-0 ↗
35. J.B. Wiskel, K. Navel, H. Henein, E. Maire, Can. Metal. Quart. 41 (2002) 193.10.1179/cmq.2002.41.2.193 ↗
36. S.G. Shabestari, M. Malekan, Can. Metal. Quart. 44 (2005) 305.10.1179/cmq.2005.44.3.305 ↗
37. M. Easton, J.F. Grandfield, D.H. StJohn, B. Rinderer, Mater. Sci. Forum 519 (2006) 1675.10.4028/www.scientific.net/MSF.519-521.1675 ↗