Thermodynamics and Kinetics of the Formation of Al2O3/ MgAl2O4/MgO in Al-Silica Metal Matrix Composite
Source abstract
Abstract
The formation of Al2O3, MgAl2O4, and MgO has been widely studied in different Al base metal matrix composites, but the studies on thermodynamic aspects of the Al2O3/ MgAl2O4/MgO phase equilibria have been limited to few systems such as Al/Al2O3 and Al/SiC. The present study analyzes the Al2O3/MgAl2O4 and MgAl2O4/MgO equilibria with respect to the temperature and the Mg content in Al/SiO2 system using an extended Miedema model. There is a linear and parabolic variation in Mg with respect to the temperature for MgAl2O4/MgO and Al2O3/MgAl2O4 equilibria, respectively, and the influence of Si and Cu in the two equilibria is not appreciable. The experimental verification has been limited to MgAl2O4/MgO equilibria due to the high Mg content (≥0.5 wt pct) required for composite processing. The study has been carried out on two varieties of Al/SiO2 composites, i.e., Al/Silica gel and Al/Micro silica processed by liquid metallurgy route (stir casting route). MgO is found to be more stable compared to MgAl2O4 at Mg levels ≥5 and 1 wt pct in Al/Silica gel and Al/Micro silica composites, respectively, at 1073 K. MgO is also found to be more stable at lower Mg content (3 wt pct) in Al/Silica gel composite with decreasing particle size of silica gel from 180 micron to submicron and nanolevels. The MgO to MgAl2O4 transformation has taken place through a series of transition phases influenced by the different thermodynamic and kinetic parameters such as holding temperature, Mg concentration in the alloy, holding time, and silica particle size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. P.K. Ghosh and S. Ray: Proc. Fabrication of Particulate Reinforced Metal Composites, Montreal, 1990, J. Masounave and F.G. Hamel, eds., ASM, Metals Park, OH, 1990, pp. 23–30
2. B.F. Quigely, G.J. Abbaschian, R. Wunderlin, R. Mehrabian: Metall. Trans. A, 1982, vol. 26A, pp. 93–10010.1007/BF02642419 ↗
3. M. Fishkis: J. Mater. Sci., 1991, vol. 26, pp. 2651–6110.1007/BF02387733 ↗
4. C.G. Levi, G.J. Abbaschian, R. Mehrabian: Metall. Trans. A, 1978, vol. 9A, pp. 697–71110.1007/BF02659927 ↗
5. A. Munitz, M. Metzger, R. Mehrabian: Metall. Trans. A, 1979, vol. 10A, pp. 1491–9710.1007/BF02812014 ↗
6. B.C. Pai, S. Ray: Mater. Sci. Eng., 1976, vol. 24A, pp. 2651–61
7. J. Tafto, K. Kristiansen, H. Westengen, A. Nygard, J.B. Borradaile, and D.O. Karlsen: Proc. Conf. Cast Reinforced Metal Matrix Composites, Chicago, IL, 1988, S.G. Fishman and A.K. Dhingra, eds., ASM, Metals Park, OH, 1988, pp. 71–75
8. G.R. Cappleman, J.F. Watts, T.W. Clyne: J. Mater. Sci., 1985, vol. 20, pp. 2159–6810.1007/BF01112300 ↗
9. V. Massardier, P. Kerdelhué, P. Merle, and J. Besson: Mater. Sci. Eng., 1995, vol. A191, pp. 267–7610.1016/0921-5093(94)09625-7 ↗
10. D.J. Lloyd, I. Jin, G.C. Weatherly: Scripta Metall., 1994, vol. 31 (4), pp. 393–9610.1016/0956-716X(94)90006-X ↗
11. W.M. Zhong, G. L’esperance, M. Suery: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2625–3510.1007/BF02669420 ↗
12. A.D. Mcleod: Proc. Fabrication of Particulate Reinforced Metal Composites, Montreal, 1990, J. Masounave and F.G. Hamel, eds., ASM, Metals Park, OH, 1990, pp. 18–21
13. J.C. Lee, J.P. Ahn, Z. Shi, J.H. Shim, H.I. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1541–5010.1007/s11661-001-0241-4 ↗
14. Z.P. Luo: Acta Mater., 2006, vol. 54, pp. 47–5810.1016/j.actamat.2005.08.022 ↗
15. J.G. Legoux, G. L’esperance, L. Salvo, and M. Suery: Proc. Fabrication of Particulates Reinforced Metal Composites, Montreal, 1990, ASM, Metals Park, OH, 1990, p. 31
16. Z. Shi, S. Ochial, M. Gu, M. Hojo, J.C. Lee: Appl. Phys. A, 2002, vol. 74, pp. 97–10410.1007/s003390100844 ↗
17. W.M. Zhong, G. L’esperance, M. Suery: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2637–4910.1007/BF02669421 ↗
18. W. Liu, U. Koster: Mater. Sci. Eng., 1996, vol. A210, pp. 1–710.1016/0921-5093(95)10078-4 ↗
19. T. Stephenson, Y. Le Petitcorps, J.M. Quenisset: Mater. Sci. Eng., 1991, vol. A135, pp. 101–0410.1016/0921-5093(91)90544-W ↗
20. V.M. Sreekumar, R.M. Pillai, B.C. Pai, M. Chakraborty: J. Am. Ceram. Soc., 2007, vol. 90 (9), pp. 2905–1110.1111/j.1551-2916.2007.01661.x ↗
21. Y. Tsunekawa, H. Suzuki, Y. Genma: Mater. Des., 2001, vol. 22, pp. 467–7210.1016/S0261-3069(00)00079-0 ↗
22. M. Hanabe, P.B. Aswath: Acta Mater., 1997, vol. 45 (10), pp. 4067–7610.1016/S1359-6454(97)00085-2 ↗
23. Y. Le Petitcorps, J.M. Quenisset, G. Le Borgne, M. Bathole: Mater. Sci. Eng., 1991, vol. A135, pp. 37–4010.1016/0921-5093(91)90533-S ↗
24. R. Molins, J.D. Bartout, Y. Bienvenu: Mater. Sci. Eng., 1991, vol. A135, pp. 111–1710.1016/0921-5093(91)90546-Y ↗
25. T.P.D. Rajan, R.M. Pillai, B.C. Pai: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2755–6110.1007/s11661-002-0398-5 ↗
26. T.P.D. Rajan: Ph.D. Dissertation, National Institute for Interdisciplinary Science and Technology (Kerala University), India, 2002
27. R.E. Lozano, C.A. Gutierrez, M.A. Pech-Canul, M.I. Pech-Canul: Mater. Char., 2007, vol. 58 (10), pp. 953–6010.1016/j.matchar.2006.09.012 ↗
28. G.W. Smith, W.J. Baxter, A.K. Sachdev: Mater. Sci. Eng., 2000, vol. 284A, pp. 246–5310.1016/S0921-5093(99)00793-5 ↗
29. M. Kuntz, S. Dierkes, G. Grathwohl: J. Am. Ceram. Soc., 2005, vol. 88 (3), pp. 553–5910.1111/j.1551-2916.2005.00124.x ↗
30. T.G. Durai, K. Das, and S. Das: Mater. Sci. Eng., vols. A 445–A446, pp. 100–0510.1016/j.msea.2006.09.018 ↗
31. G. Chen, G.X. Sun, Z.G. Zhu: Mater. Sci. Eng., 1999, vol. A265, pp. 197–20110.1016/S0921-5093(98)01124-1 ↗
32. M.O. Lai, L. Lu, B.Y. Chung: Comp. Struct., 2002, vol. 57, pp. 183–8710.1016/S0263-8223(02)00082-X ↗
33. O. Kubaschewski, C.B. Alcock: Metallurgical Thermochemistry, 5th ed., vol. 24, Pergamon Press, Oxford, United Kingdom, 1979, pp. 378–84
34. K. Surla, F. Valdivieso, M. Pijolat, M. Soustelle, M. Prin: Solid State Ionics, 2001, vol. 143, pp. 355–6510.1016/S0167-2738(01)00861-X ↗
35. A.D. Mcleod, C.M. Gabryel: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 1279–8310.1007/BF02665059 ↗
36. A.R. Miedema, P.F. De Chatel, F.R. De Boer: Physica B, 1980, vol. 100, pp. 1–2810.1016/0378-4363(80)90054-6 ↗
37. T. Fan, G. Yang, D. Zhang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 225–3310.1007/s11661-005-0154-8 ↗
38. F.C.R. Hernandez, M.B. Djurdjevic, W.T. Kierkus, J.H. Sokolowski: Mater. Sci. Eng., 2005, vol. A396, pp. 271–7610.1016/j.msea.2005.01.024 ↗
39. T. Fan, G. Yang, D. Zhang: Mater. Sci. Eng., 2005, vol. A394, pp. 327–3810.1016/j.msea.2004.11.040 ↗
40. H.L.N. Dickon, Q. Zhao, C. Qin, M.W. Ho, Y. Hong: J. Euro. Ceram. Soc., 2001, vol. 21, pp. 1049–5310.1016/S0955-2219(00)00306-X ↗
41. M. Bruno, J.L. Holm: Therm. Chem. Acta, 1998, vol. 318, pp. 125–2910.1016/S0040-6031(98)00336-0 ↗
42. R. Asthana: Solidification Processing of Reinforced Metals, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1998, pp. 115–1610.4028/b-Ae8iDN ↗
43. Y.M. Sung, J.W. Ahn: J. Mater. Sci., 1999, vol. 34, pp. 5127–3210.1023/A:1004769318641 ↗
44. P. Zhang, T. Debroy, S. Seetharaman: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2105–1410.1007/BF02651865 ↗
45. H. Zhang, J.F. Banfield: J. Mater. Chem., 1998, vol. 8 (9), pp. 2073–7610.1039/a802619j ↗