The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys
Source abstract
Abstract
In this study, the effect of Si and Mg content on the microstructure, tensile ductility, and stretch formability of naturally aged Al-Mg-Si alloys has been investigated using optical microscopy, scanning electron microscopy, tensile testing, forming limit diagram tests, and various modeling approaches. The results show that by raising the Si content in the alloy, the tensile ductility and stretch formability can be improved. By contrast, increasing the Mg content in the alloy has little influence on the tensile ductility and stretch formability. The results are discussed in terms of the effects of microstructural features such as solutes, clusters, and dispersoids on the work-hardening and strain rate-hardening behavior of the materials. Furthermore, thermodynamic modeling is employed to predict microstructures that could improve the stretch formability of the high Mg content alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. S.M. Hirth, G.J. Marshall, S.A. Court and D.J. Lloyd: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 452–56.10.1016/S0921-5093(01)00969-8 ↗
2. Y. Birol: Mater. Sci. Eng. A, 2005, vol. 391, pp. 175–80.10.1016/j.msea.2004.08.069 ↗
3. S.S. Hecker: J. Eng. Mater. Technol., 1975, vol. 97, pp. 66–73.10.1115/1.3443263 ↗
4. J.E. Bird and J. L. Duncan (1981) Metall. Trans. A, 12A, pp. 235–41.10.1007/BF02655196 ↗
5. A.K. Ghosh: J. Eng. Mater. Technol., 1977, vol. 99, pp. 264–74.10.1115/1.3443530 ↗
6. A.K. Sachdev (1990) Metall. Trans. A 21A, pp. 165–75.10.1007/BF02656434 ↗
7. S.J. Murtha: SAE Tech. Paper Ser., no. 950718, 1995, pp. 657–66.
8. J. Bottema, C. Lahaye, R. Baartman, L. Zhuang, P. De Smet, and F. Schoepen: SAE Tech. Paper Ser., no. 981007, 1998, pp. 1–8.
9. E. Brünger, O. Engler and J. Hirsch (2006) Virtual Fabrication of Aluminium Products: Microstructural Modeling in Industrial Aluminum Fabrication Processes. Wiley-VCH, Weinheim, , p. 55.
10. D.V. Wilson, A.R. Mirshames and W.T. Roberts: Int. J. Mech. Sci., 1983, vol. 25, pp. 859–70.10.1016/0020-7403(83)90017-6 ↗
11. R. Pearce and D. Ganguli: J. Inst. Met., 1972, vol. 100, pp. 289–95.
12. P.W. Beaver and B.A. Parker: Mater. Sci. Eng., 1986, vol. 82, pp. 217–24.10.1016/0025-5416(86)90109-6 ↗
13. R.G. Kamat, J.F. Butler, Jr., S.J. Murtha and F.S. Bovard (2002) Mater. Sci. Forum 396–402, pp. 1591–96.10.4028/www.scientific.net/MSF.396-402.1591 ↗
14. S.K. Das (2006) Mater. Sci. Forum 519–521:1239–44.10.4028/www.scientific.net/MSF.519-521.1239 ↗
15. ASTM Standard E2218-02, 2008.
16. M. Weiss, M.E. Dingle, B.F. Rolfe and P.D. Hodgson: J. Eng. Mater. Technol., 2007, vol. 129, pp. 530–37.10.1115/1.2772329 ↗
17. R.T. Dehoff and F.N. Rhines: Quantitative Microscopy, p. 46, McGraw-Hill, New York, 1968.
18. L.M. Brown (1979) Strength of Metals and Alloys. Pergamon, Aachen, , p. 1551.10.1016/B978-1-4832-8412-5.50245-9 ↗
19. TTAL6: TT Al-Based Alloys Database, Version 6.0, ThermoTech Ltd., Surrey Technology Center, Guildford, U.K., 2007.
20. N. C. W. Kuijpers, F. J. Vermolen, C. Vuik, P.T.G. Koenis, K.E. Nilsen, S. van der Zwaag (2005) Mater. Sci. Eng. A 394, pp. 9–19.10.1016/j.msea.2004.09.073 ↗
21. W. J. Poole, X. Wang, D. J. Lloyd, J. D. Embury: Philos. Mag., 2010, vol. 85, pp. 3113–35.10.1080/14786430500154935 ↗
22. K. Strobel, E. Sweet, M. Easton, JF Nie and M. Couper: Mater. Sci. Forum, 2010, vol. 654–656, pp. 926–29.10.4028/www.scientific.net/MSF.654-656.926 ↗
23. K.J. Kim, C.W. Kim, B.I. Choi, C.W. Sung, H.Y. Kim, S.T. Won, H.Y. RYU: J. Solid Mech. Mater. Eng., 2008, vol. 2, pp. 574–81.10.1299/jmmp.2.574 ↗
24. P. M. Rodrigues: Sheet Met. Ind., 1984, vol. 6, pp. 492–95.
25. K. Campbell, L. Dover, T.R. Ramachandran and J.D. Embury: Met. Forum, 1979, vol. 2, pp. 229–35.
26. A. Korbel, J.D. Embury, M. Hatherly, P.L. Martin and H.W. Erbsloh: Acta Metall., 1986, vol. 34, pp. 1999–2009.10.1016/0001-6160(86)90259-2 ↗
27. R.C. Dorward: J. Mater. Eng. Perform., 1994, vol. 3, pp. 115–21.10.1007/BF02654507 ↗
28. L.R. Morris, R. Iricibar, J.D. Embury and J.L. Duncan: Aluminum transformation technology and applications, p. 549, ASM, Buenos Aires, 1982.
29. O. Engler, J. Hirsch: Mater. Sci. Eng. A, 2002, vol. 336, pp. 249–62.10.1016/S0921-5093(01)01968-2 ↗
30. Y. Huang and F.J. Humphreys (2012) Mater. Chem. Phys. 132: 166–74.10.1016/j.matchemphys.2011.11.018 ↗
31. D.J. Lloyd: Metall. Trans. A, 1980, vol. 11A, pp. 1287–94.10.1007/BF02653482 ↗
32. L.M. Cheng, W.J. Poole, J.D. Embury, D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473–81.10.1007/s11661-003-0007-2 ↗
33. N.D. Alexopoulos and M. Tiryakioglu (2009) Mater. Sci. Eng. A 507:236–40.10.1016/j.msea.2008.12.026 ↗
34. P.W. Beaver: J. Mech. Work. Technol., 1982, vol. 7, pp. 215–31.10.1016/0378-3804(83)90001-3 ↗
35. Y. Estrin and L.P. Kubin (1995) Continuum Models for Materials with Microstructure. Wiley, Chichester, p. 395.
36. G.B. Gibbs: Mater. Sci. Eng. A, 1969, vol. 4, pp. 313–28.10.1016/0025-5416(69)90026-3 ↗
37. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.10.1016/0956-7151(90)90021-8 ↗
38. M.S. Duesbery: Modell. Simul. Mater. Sci. Eng., 1998, vol. 6, pp. 35–49.10.1088/0965-0393/6/1/005 ↗
39. W.F. Hosford: Mechanical behavior of materials, p. 162, Cambridge University Press, New York, 2005.10.1017/CBO9780511810930 ↗
40. J.M. Dowling and J.W. Martin (1976) Acta Metall. 24:1147–53.10.1016/0001-6160(76)90032-8 ↗
41. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57–70.10.1016/0001-6160(84)90202-5 ↗
42. S.A. Court, K.M. Gatenby and D. J. Lloyd: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 443–47.10.1016/S0921-5093(00)02018-9 ↗
43. N. Yu. Zolotorevsky, A.N. Solonin, A.Yu. Churyum, V.S. Zolotorevsky (2009) Mater. Sci. Eng. A 502:111–17.10.1016/j.msea.2008.10.010 ↗
44. C.R. Hutchinson, J.D.C. Teixeira, L. Bourgeois: The 11th International Conference on Al Alloys, p. 1647, Wiley-VCH GmbH & Co., Weinheim, 2008.
45. A.K. Gupta, D.J. Lloyd, S.A. Court: Mater. Sci. Eng. A, 2001, vol. 316, pp. 11–17.10.1016/S0921-5093(01)01247-3 ↗
46. J. O. Andersson, T. Helander, L. Höglund, P.F. Shi, B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗