Microstructure and Mechanical Properties of Two-Phase Cr-Cr2Ta Alloys
Source abstract
Abstract
The microstructure and fracture toughness values of a series of binary Cr-Cr2Ta alloys have been studied in the as-cast condition and after long-term annealing of up to 500 hours at 1573 K (1300 °C). With increasing annealing time, both the Cr(Ta) solid solution and the Cr2Ta Laves phases progressively approached equilibrium compositions. This observation was accompanied by the transformation of the Laves phase from the hexagonal C14 to the cubic C15 polytype, along with a small fraction of an intermediate hexagonal polytype. The overall hardness values of the alloys increased with the Laves phase fraction, which was accompanied by a decrease in the room-temperature fracture toughness values. The fracture surface of the three-point bend specimens revealed brittle cleavage-type fracture in all the alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. R.L. Fleischer: J. Met., 1987, vol. 22, pp. 2281–88.10.1007/BF01082105 ↗
2. R.L. Fleischer and R. Zabala: Metall. Trans. A, 1990, vol. 21A, pp. 2709–15.10.1007/BF02646066 ↗
3. D.M. Shah, D.L. Anton, D.P. Pope, and S. Chin: Mater. Sci. Eng. A, 1995, vols. 192–193, pp. 658–72.10.1016/0921-5093(95)03318-1 ↗
4. G. Sauthoff: Intermetallics, 2000, vol. 8, pp. 1101–09.10.1016/S0966-9795(00)00045-5 ↗
5. J. Livingston: Phys. Stat. Solidi (A), 1992, vol. 131, pp. 415–23.10.1002/pssa.2211310215 ↗
6. M. Fujita, Y. Kaneno, and T. Takasugi: J. Alloys Compd., 2006, vol. 424, pp. 283–88.10.1016/j.jallcom.2005.11.087 ↗
7. T. Ohta, Y. Kaneno, H. Inoue, T. Takasugi, and S. Hanada: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 583–90.10.1007/s11661-005-0173-5 ↗
8. H. Bei, E. George, E. Kenok, and G. Pharr: Acta Mater., 2003, vol. 51, pp. 6241–52.10.1016/S1359-6454(03)00447-6 ↗
9. M. McLean: Directionally Solidified Materials for High Temperature Service, TMS, Warrendale, PA, 1983.
10. Y.F. Gu, H. Harada, and Y. Ro: J. Microsc., 2004, vol. 56, pp. 28–33.
11. D. Thoma and J. Perepezko: Mater. Sci. Eng. A, 1992, vol. 156, pp. 97–106.10.1016/0921-5093(92)90420-6 ↗
12. S. Lee, P.K. Liaw, C.T. Liu, and Y.T. Chou: Mater. Sci. Eng. A, 1999, vol. 268, pp. 184–92.10.1016/S0921-5093(99)00068-4 ↗
13. M. Takeyama and C. Liu: Mater. Sci. Eng. A, 1991, vol. 132, pp. 61–66.10.1016/0921-5093(91)90361-P ↗
14. M.P. Brady, C.T. Liu, J.H. Zhu, P.F. Tortorelli, and L.R. Walker: Scripta Mater., 2005, vol. 52, pp. 815–19.10.1016/j.scriptamat.2005.01.016 ↗
15. M.P. Brady, J.H. Zhu, C.T. Liu, P.F. Tortorelli, and L.R. Walker: Intermetallics, 2000, vol. 8, pp. 1111–18.10.1016/S0966-9795(00)00046-7 ↗
16. K.S. Kumar and D. Miracle: Intermetallics, 1994, vol. 2, pp. 257–74.10.1016/0966-9795(94)90012-4 ↗
17. K. Ravichandran, D. Miracle, and M. Mendiratta: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2583–92.10.1007/BF02652352 ↗
18. T. Takasugi, K.S. Kumar, C.T. Liu, and E.H. Lee: Mater. Sci. Eng. A, 1999, vol. 260, pp. 108–23.10.1016/S0921-5093(98)00981-2 ↗
19. K.S. Kumar and P.M. Hazzledine: Intermetallics, 2004, vol. 12, pp. 763–70.10.1016/j.intermet.2004.02.017 ↗
20. J. Aufrecht, A. Leineweber, and E.J. Mittemeijer: Mater. Res. Soc. Symp. Proc., 2009, vol. 1128, pp. 481–86.
21. M.F. Chisholm, K.S. Kumar, and P.M. Hazzledine: Science, 2005, vol. 307, pp. 701–03.10.1126/science.1105962 ↗
22. K.S. Kumar and C.T. Liu: Acta Mater., 1997, vol. 45, pp. 3671–86.10.1016/S1359-6454(97)00050-5 ↗
23. K.S. Kumar, L. Pang, C.T. Liu, J.A. Horton, and E.A. Kenik: Acta Mater., 2000, vol. 48, pp. 911–23.10.1016/S1359-6454(99)00377-8 ↗
24. B.P. Bewlay, J.A. Sutliff, M.R. Jackson, and H.A. Lipsitt: Acta Metall. Mater., 1994, vol. 42, pp. 2869–72.10.1016/0956-7151(94)90228-3 ↗
25. K.S. Kumar, L. Pang, J.A. Horton, and C.T. Liu: Intermetallics, 2003, vol. 11, pp. 677–85.10.1016/S0966-9795(03)00065-7 ↗
26. K. Chen, C. Allen, and J. Livingston: J. Mater. Res., 1997, vol. 12, pp. 1472–81.10.1557/JMR.1997.0203 ↗
27. R.H. Tien, J.H. Zhu, C.T. Liu, and L.R. Walker: Intermetallics, 2009, vol. 13, pp. 361–66.10.1016/j.intermet.2004.07.017 ↗
28. M.P. Brady, C.T. Liu, J.H. Zhu, P.F. Tortorelli, and L.R. Walker: Scripta Mater., 2005, vol. 52, pp. 815–19.10.1016/j.scriptamat.2005.01.016 ↗
29. C.T. Liu, J.H. Zhu, M.P. Brady, C.G. Mc Kenny, and L.M. Pike: Intermetallics, 2000, vol. 8, pp. 1119–29.10.1016/S0966-9795(00)00109-6 ↗
30. H. Rietveld: Acta Cryst., 1967, vol. 22, pp. 151–52.10.1107/S0365110X67000234 ↗
31. H. Rietveld: J. Appl. Cryst., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
32. A.C. Larson, and R.B. Von Dreele: Los Alamos National Laboratory Report LAUR, 1994, pp. 86–748.
33. B.H. Toby: J. Appl. Cryst., 2001, vol. 34, pp. 210–13.10.1107/S0021889801002242 ↗
34. R. Subramanian and J.H. Schneibel: Intermetallics, 1997, vol. 5, pp. 401–08.10.1016/S0966-9795(97)00010-1 ↗
35. M. Venkatraman and J. Neumann: Binary Alloy Phase Diagrams, II Ed., vol. 2, T.B. Massalski, ed., 1990, pp. 1338–40.
36. K. Kumar: Mater. Res. Soc. Symp. Proc., 1997, vol. 460, pp. 667–75.
37. D. Abraham, J. Richardson, and S. McDeavit: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 658–65.10.1016/S0921-5093(97)00649-7 ↗
38. P. Pirouz and P. Hazzledine: Scripta Metall. Mater., 1991, vol. 25, pp. 1167–70.10.1016/0956-716X(91)90522-3 ↗
39. H.J. Goldschmidt and J.A. Brand: J. Less Common Met., 1961, vol. 3, pp. 44–61.10.1016/0022-5088(61)90042-X ↗
40. C.T. Liu, J.H. Zhu, M.P. Brady, C.G. McKamey, and L.M. Pike: Intermetallics, 2000, vol. 8, pp. 1119–29.10.1016/S0966-9795(00)00109-6 ↗
41. B. Somerday and R. Gangloff: Metall. Trans. A, 1994, vol. 25A, pp. 1471–79.10.1007/BF02665479 ↗
42. D. Liu and J. Lewandowski: Metall. Trans. A, 1993, vol. 24A, pp. 609–15.10.1007/BF02656630 ↗
43. M.Y. He, A.G. Evans, and W.A. Curtin: Acta Metall. Mater., 1993, vol. 41, pp. 871–78.10.1016/0956-7151(93)90021-J ↗
44. M.C. Shaw, D.B. Marshall, B.J. Dalgleish, M.S. Dadkhah, M.Y. He, and A.G. Evans: Acta Metall. Mater., 1994, vol. 42, pp. 4091–99.10.1016/0956-7151(94)90187-2 ↗
45. J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall. Mater., 1995, vol. 43, pp. 1955–67.10.1016/0956-7151(94)00391-T ↗
46. M. Mendiratta and D. Dimiduk: Metall. Trans. A, 1993, vol. 24A, pp. 501–04.10.1007/BF02657338 ↗
47. M. Mendiratta, J. Lewandowski, and D. Dimiduk: Metall. Trans. A, 1991, vol. 22A, pp. 1573–83.10.1007/BF02667370 ↗
48. M. Mendiratta, R. Goetz, D. Dimiduk, and J. Lewandowski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1767–76.10.1007/BF02670764 ↗
49. J. Rigney and J. Lewandowski: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3292–3306.10.1007/BF02663879 ↗
50. A. Samant and J. Lewandowski: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 389–99.10.1007/s11661-997-0140-4 ↗
51. K. Chan: Metall. Trans. A, 1990, vol. 21A, pp. 2687–99.10.1007/BF02646064 ↗
52. K. Chan and Y.W. Kim: Metall. Trans. A, 1992, vol. 23A, pp. 1663–77.10.1007/BF02804362 ↗
53. K. Chan: Phil. Mag., 2005, vol. 85, pp. 239–59.10.1080/14786430412331315725 ↗
54. D. Davidson, K. Chan, and D.L. Anton: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3007–18.10.1007/BF02663850 ↗
55. T. Saito, T. Furuta, J.-H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara, and T. Sakuma: Science, 2003, vol. 300, pp. 464–67.10.1126/science.1081957 ↗
56. E.P. Abrahamson II and N.J. Gramt: High Temperature Materials, R.F. Hehemann and G. Mervin Ault, eds., Wiley, New York, NY, 1957, pp. 229–42.
57. R.W. Fountain and M. Korchynsky: High Temperature Materials, R.F. Hehemann and G. Mervin Ault, eds., Wiley, New York, NY, 1957, pp. 207–28.
58. C.L. Briant, K.S. Kumar, N. Rosenberg, and H. Tomioka: Int. J. Refract. Met. Hard Mater., 2000, vol. 18, pp. 9–11.10.1016/S0263-4368(99)00031-1 ↗
59. M.P. Brady, I.M. Anderson, M.L. Weaver, H.M. Meyer, L.R. Walker, M.K. Miller, D.J. Larson, I.G. Wright, V.K. Sikka, A. Rar, G.M. Pharr, J.R. Keiser, and C.A. Walls: Mater. Sci. Eng. A, 2003, vol. 358, pp. 243–54.10.1016/S0921-5093(03)00324-1 ↗
60. N.E. Ryan: J. Less Common Met., 1966, vol. 11, pp. 221–48.10.1016/0022-5088(66)90010-5 ↗
61. Y. Gu, Y. Ro, and H. Harada: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3329–31.10.1007/s11661-006-0237-1 ↗