journal article·2013-02

Formation and Phase Selection of Iron-Rich Intermetallics in Al-4.6Cu-0.5Fe Cast Alloys

K. Liu, X. Cao, X.-G. Chen

Publisher page

Abstract

The solidification structures of Al-Cu 206 cast alloys at a high iron level of 0.5 pct were systematically studied by means of differential scanning calorimetry, electron backscattered diffraction, and transmission electron microscopy. The full solidification sequences of the 206 cast alloys at 0.5 pct Fe were established. The influences of both alloy composition (i.e., Si and Mn contents) and cooling rate on the formation and phase selection of the iron-rich intermetallics have been systematically explored. At a cooling rate of 12 K/min, it was found that one of the three iron-rich phases, i.e., Chinese script Alm(FeMn) and α-Fe, or platelet Al3(FeMn), may precipitate as the dominant iron-rich intermetallic, depending on Si and Mn contents. However, the dominant Chinese script iron-rich intermetallics, Alm(FeMn) and/or α-Fe, can be fully obtained for the 206 Al-Cu cast alloys at 0.5 pct Fe above a threshold cooling rate that can easily be obtained in normal industrial casting conditions, indicating that there is a significant potential of designing and developing new 206 Al-Cu cast alloys with a high tolerant iron content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. P. Gilgien, A. Zryd, and W. Kurz: Acta Metall. Mater., 1995, vol. 43, pp. 3477–87.10.1016/0956-7151(95)00039-X ↗
2. C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Prog. Mater. Sci., 1998, vol. 43, pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
3. W. Khalifa, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 807–25.10.1007/s11661-003-1009-9 ↗
4. M.W. Meredith, A.L. Greer, P.V. Evans, and R.G. Hamerton: Light Metals, San Diego, CA, 1999, pp. 811–17.
5. X.G. Chen: Light Metals, Minerals, Metals & Materials Soc (TMS), San Antonio, TX, 1998, pp. 1071–76.
6. M.W. Meredith, A.L. Greer, and P.V. Evans: Light Metals, Minerals, Metals & Materials Soc (TMS), San Antonio, TX, 1998, pp. 977–82.
7. C.M. Adam and L.M. Hogan: Acta Metall., 1975, vol. 23, pp. 345–54.10.1016/0001-6160(75)90127-3 ↗
8. L. Bäckerud: Jernkont. Ann., 1968, vol. 152, pp. 109–38.
9. I.R. Hughes and H. Jones: J. Mater. Sci., 1976, vol. 11, pp. 1781–93.10.1007/BF00708256 ↗
10. L. Dong and J. Howard: Z. Metallkde, 1992, vol. 83, pp. 224–26.
11. N.A. Belov, A.A. Aksenov, and D.G. Eskin: Iron in Aluminum Alloys: Impurity and Alloying Element, Taylor & Francis, London, 2002.10.1201/9781482265019 ↗
12. R.M. Srivastava, J. Eckert, W. Löser, B.K. Dhindaw, and L. Schultz: Metall. Trans., 2002, vol. 43, pp. 1670–75.
13. G.K. Sigworth and J. Fred Major: Light Metals, Minerals Metals & Materials Soc (TMS), San Antonio, TX, 2006, pp. 795–99.
14. H. Kamguo Kamga, D. Larouche, M. Bournane, and A. Rahem: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2844–55.10.1007/s11661-010-0293-4 ↗
15. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. B (on-line published), doi:10.1007/s11663-012-9694-7, 2012.10.1007/s11663-012-9694-7 ↗
16. C.J. Tseng, S.L. Lee, T.F. Wu, and J.C. Lin: Mater. Trans. JIM, 2000, vol. 41, pp. 708–13.10.2320/matertrans1989.41.708 ↗
17. K. Liu, X. Cao, and X.G. Chen: J. Mater. Sci., 2012, vol. 47, pp. 4290–98.10.1007/s10853-012-6279-4 ↗
18. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1097–1101.10.1007/s11661-011-1004-5 ↗
19. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2004–16.10.1007/s11661-010-0578-7 ↗
20. K. Liu, X. Cao, and X.G. Chen: Light Metal—Advances in Materials and Processes, Met. Soc., Vancouver, BC, Canada, 2010, pp. 113–20.
21. H.K. Kamga, D. Larouche, M. Bournane, and A. Rahem: Int. J. Cast Met. Res., 2012, vol. 25, pp. 15–25.10.1179/1743133610Y.0000000012 ↗
22. A. Couture: Int. Cast Met. J., 1981, vol. 6, pp. 9–17.
23. C.J. Tseng: Ph.D. Thesis, Engineering College, National Central University, Taiwan, China, 2003.
24. W. Bonsack: ASTM Bull., 1942, vol. 117, pp. 45–59.
25. W. Bonsack: ASTM Bull., 1943, vol. 124, pp. 41–51.
26. C.L. Chen and R.C. Thomson: J. Alloy. Compd., 2010, vol. 490, pp. 293–300.10.1016/j.jallcom.2009.09.181 ↗
27. M. Kral: Scripta Mater., 2004, vol. 51, pp. 215–19.10.1016/j.scriptamat.2004.04.015 ↗
28. P. Skierpe: Acta Crystallogr., 1988, vol. B44, pp. 480–86.10.1107/S0108768188005245 ↗
29. R.M.K. Young and T.W. Clyne: Scripta Metall. Mater., 1981, vol. 15, pp. 1211–16.10.1016/0036-9748(81)90301-X ↗
30. K. Sahoo, S. Das, and B. Murty: Mater. Sci. Eng. A, 2003, vol. 355, pp. 193–200.10.1016/S0921-5093(03)00064-9 ↗
31. D.H. Kim and B. Cantor: J. Mater. Sci., 1994, vol. 29, pp. 2884–92.10.1007/BF01117597 ↗
32. P. Skjerpe: Mater. Trans. A, 1987, vol. 18A, pp. 189–200.10.1007/BF02825700 ↗
33. Y.J. Li and L. Arnberg: Acta Mater., 2004, vol. 52, pp. 2673–81.10.1016/j.actamat.2004.02.015 ↗
34. Y.J. Li and L. Arnberg: Acta Mater., 2004, vol. 52, pp. 2945–52.10.1016/j.actamat.2004.02.041 ↗
35. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1425–35.10.1007/s11661-004-0251-0 ↗
36. B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987–95.10.1007/BF02642799 ↗
37. J. Campbell: Castings, Butterworth-Heinemann, Oxford, 1991.
38. L. Bäckerud: Solidification Characteristics of Aluminum Alloys, Skanaluminium, Universitetsforlaget AS, Oslo, 1986.
39. W.T. Denholm, J.D. Esdaile, N.G. Siviour, and B.W. Wilson: Metall. Trans. A, 1984, vol. 15A, pp. 1311–17.10.1007/BF02648559 ↗
40. P.V. Evans, J. Worth, A. Bosland, and S.C. Flood: Proceedings of the 4 th Decennial International Conference on Solidification Processing (SP’97), University of Sheffield, Sheffield, 1997, pp. 531–35.
41. R.W. Thomas, H. Cama, P.V. Evans, and J.D. Hunt: Proceedings of the 4 th Decennial International Conference on Solidification Processing (SP’97), University of Sheffield, Sheffield, 1997, pp. 559–63.