Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification
Source abstract
Abstract
Fast synchrotron X-ray microtomography was used to directly observe damage accumulation in a semi-solid Al-15 wt pct Cu alloy with a solid fraction of ∼0.75 during isothermal tensile deformation. The evolution of damage was quantified in terms of size distribution of internal and surface-connected damage, strain mapping, and volume change to provide an insight into hot tear formation. A combination of existing void growth, void nucleation, and void coalescence all contribute to the final failure, although each dominates during different stages of deformation. Specifically, internal voids are shown to grow and coalesce from the region of high triaxiality at the center of the gage length outward and prove to be the contributing factor to final failure caused by insufficient liquid feeding. © 2012 The Minerals, Metals & Materials Society and ASM International.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J. Yi, Y. Gao, P. Lee and T. Lindley: Metall. Mater. Trans. B, 2006, vol. 37, pp. 301-311.10.1007/BF02693159 ↗
2. J. Yi, Y. Gao, P. Lee, H. Flower and T. Lindley: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1879-1890.10.1007/s11661-003-0153-6 ↗
3. Y. F. Guven and J. D. Hunt: Cast Metals, 1988, vol. 1, pp. 104-111.10.1080/09534962.1988.11818955 ↗
4. I. Farup, J. M. Drezet and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261-1269.10.1016/S1359-6454(01)00013-1 ↗
5. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2388–2400.10.1007/s11661-009-9941-y ↗
6. M. Rappaz, J. M. Drezet and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-455.10.1007/s11661-999-0334-z ↗
7. D.G. Eskin, Suyitno, and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
8. D. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1511-1519.10.1007/s11661-007-9169-7 ↗
9. J. D. Hunt, K. A. Jackson and H. Brown: Rev. Sci. Instrum., 1966, vol. 37, p. 805.10.1063/1.1720336 ↗
10. J. Forsten and H. M. Miekk-oja.: J. Inst. Met., 1967, vol. 95, pp. 143–145.
11. E. W. J. Miller and J. Beech: Metallography, 1972, vol. 5, pp. 298-300.10.1016/0026-0800(72)90009-2 ↗
12. P. D. Lee and J. D. Hunt: Modeling of Casting, Welding, and Advanced Solidification Processes 1995, vol. VII, pp. 585-592.
13. P. D. Lee and J. D. Hunt: Scripta Mater., 1997, vol. 36, pp. 399-404.10.1016/S1359-6462(96)00411-3 ↗
14. P. D. Lee and J. D. Hunt: Acta Mater., 1997, vol. 45, pp. 4155-4169.10.1016/S1359-6454(97)00081-5 ↗
15. C. Davidson, D. Viano, L. Lu and D. StJohn: Int J Cast Met Res, 2006, vol. 19, pp. 59-65.10.1179/136404606225023291 ↗
16. J. B. Mitchell, S. L. Cockcroft, D. Viano, C. Davidson and D. StJohn: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2503-2512.10.1007/s11661-007-9221-7 ↗
17. W. S. Pellini: Foundry, 1952, vol. 80, pp. 125-199.
18. A. B. Phillion, R. W. Hamilton, D. Fuloria, A. C. L. Leung, P. Rockett, T. Connolley and P. D. Lee: Acta Mater., 2011, vol. 59, pp. 1436-1444.10.1016/j.actamat.2010.11.005 ↗
19. S. Terzi, L. Salvo, M. Suéry, N. Limodin, J. Adrien, E. Maire, Y. Pannier, M. Bornert, D. Bernard, M. Felberbaum, M. Rappaz and E. Boller: Scripta Mater., 2009, vol. 61, pp. 449-452.10.1016/j.scriptamat.2009.04.041 ↗
20. K. M. Kareh, P. D. Lee and C. M. Gourlay: Solid State Phenom., 2013, vol. 192-193, pp. 179-184.
21. S. Titarenko, V. Titarenko, A. Kyrieleis, P.J. Withers, and F. De Carlo: J. Synchrot. Radiat., 2011, vol. 18, pp. 427-435.10.1107/S0909049511006005 ↗
22. V. Titarenko, R. Bradley, C. Martin, P. J. Withers and S. Titarenko: Developments in X-Ray Tomography VII, 2010, vol. 7804, pp. 78040Z.10.1117/12.860260 ↗
23. A. Kyrieleis, V. Titarenko, M. Ibison, T. Connolley and P. J. Withers: J. Microsc., 2011, vol. 241, pp. 69-82.10.1111/j.1365-2818.2010.03408.x ↗
24. C. Puncreobutr, P. Lee, R. Hamilton and A. Phillion: JOM, 2012, vol. 64, pp. 89-95.10.1007/s11837-011-0217-9 ↗
25. J. Réthoré, N. Limodin, J.-Y. Buffière, F. Hild, W. Ludwig, and S. Roux: J. Strain Analysis, 2011, vol. 46, pp. 1-13.10.1177/0309324711409999 ↗
26. C. Puncreobutr, P. D. Lee, M. Kaye, D. Balint, D. Farrugia, T. Connolley and J. Lin: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 33, pp. 012038.10.1088/1757-899X/33/1/012038 ↗
27. P. D. Lee and J. D. Hunt: Acta Mater., 2001, vol. 49, pp. 1383-1398.10.1016/S1359-6454(01)00043-X ↗
28. J. Campbell: Castings, 2nd ed., Butterworth-Heinemann Ltd, Oxford, 2003.
29. A. B. Phillion, P. D. Lee, E. Maire and S. L. Cockcroft: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2459-2469.10.1007/s11661-008-9584-4 ↗
30. L. Yuan, C. O’Sullivan and C. M. Gourlay: Acta Mater., 2012, vol. 60, pp. 1334-1345.10.1016/j.actamat.2011.11.042 ↗