journal article·2010-08

Deformation and Strain Storage Mechanisms during High-Temperature Compression of a Powder Metallurgy Nickel-Base Superalloy

Wen J. Tu, Tresa M. Pollock

Publisher page

Abstract

High-temperature compression testing combined with high-resolution electron backscatter diffraction (EBSD) analysis has been used to study microstructural-scale straining processes that occur during high-temperature deformation of a powder-consolidated nickel-base superalloy, Rene 88DT (GE Aviation, Evendale, OH). Orientation imaging has been employed to study grain-level straining and strain storage at temperatures between 1323 K (1050 °C) and 1241 K (968 °C) for strain rates between 0.1/s and 0.00032/s at nominal strain levels between 0.1 and 0.7. Two distinct deformation mechanisms were observed. At strain rates below 0.01/s, superplastic deformation dominates, while power-law creep occurs during high rate compression. Stored strain and evolution of the grain structure during deformation are dependent on strain rate during compression. At low strain rates in the superplastic regime, low levels of stored strain and some grain growth are observed. At high strain rates, dynamic recrystallization occurs along with higher levels of stored strain within selected grains, particularly those at the high end of the grain size distribution. A constitutive model for superplastic deformation was employed to predict the temperature and strain rate dependence of the transition from superplastic to power law deformation. The transition in rate sensitivity was consistent with the transition in stored strain measured by EBSD. Superplasticity-enhanced grain growth is observed and the implications for the transition in deformation mechanisms are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. E.S. Huron and P.G. Roth: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 359–68.10.7449/1996/Superalloys_1996_359_368 ↗
2. K.M. Chang, M.F. Henry, and M.G. Benz: JOM, 1990, vol. 42, pp. 29–35.10.1007/BF03220467 ↗
3. T.P. Gabb, J. Gayda, J. Telesman, and A. Garg: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, pp. 121–30.10.7449/2008/Superalloys_2008_121_130 ↗
4. J.Y. Guedou, I. Augustins-Lecallier, L. Naze, P. Caron, and D. Locq: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, pp. 21–30.10.7449/2008/Superalloys_2008_21_30 ↗
5. M. Shenoy, J. Zhang, and D.L. McDowell: Fatigue Fract. Eng. Mater. Struct., 2007, vol. 30, pp. 889–904.10.1111/j.1460-2695.2007.01159.x ↗
6. J. Telesman, T.P. Gabb, A. Garg, P. Bonaclise, and J. Gayda: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, pp. 807–16.10.7449/2008/Superalloys_2008_807_816 ↗
7. D.D. Krueger, R.D. Kissinger, and R.G. Menzies: in Superalloys 2002, S.D. Antolovich, R.W. Stusrud, R.A. Mackay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 2002, pp. 277–86.
8. J.S. Miao, T.M. Pollock, and J.W. Jones: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, pp. 589–97.10.7449/2008/Superalloys_2008_589_597 ↗
9. H. Fecht and D. Furrer: Adv. Eng. Mater., 2000, vol. 2, pp. 777–87.10.1002/1527-2648(200012)2:12<777::AID-ADEM777>3.0.CO;2-R ↗
10. S.T. Wlodek, M. Kelly, and D.A. Alden: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, p. 129.10.7449/1996/Superalloys_1996_129_136 ↗
11. C.U. Hardwicke and G.S. Shen: Symp. Advanced Technologies for Superalloy Affordability, 2000 TMS Annual Meeting, Nashville, TN, 2000, K.M. Chang, S.K. Srivastava, D.U. Furrer, and K.R. Bain, eds., TMS, Warrendale, PA, 2000, pp. 265–75.
12. E. Payton, G. Wang, N. Ma, Y.Z. Wang, M. Mills, D. Whitis, D. Mourer, and D. Wei: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, pp. 975–84.10.7449/2008/Superalloys_2008_975_984 ↗
13. S.T. Wlodek, M. Kelly, and D.A. Alden: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 129–36.10.7449/1996/Superalloys_1996_129_136 ↗
14. D.D. Krueger, R.D. Kissinger, and R.G. Menzies: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. Mackay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, p. 277.10.7449/1992/Superalloys_1992_277_286 ↗
15. A.J. Schwartz, M. Kumar, and B.L. Adams: Electron Backscatter Diffraction and Future Directions, Kluwer Academic/Plenum Publishers, London, 2000.
16. M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh: Nucl. Eng. Design, 2005, vol. 235, pp. 713–25.10.1016/j.nucengdes.2004.11.006 ↗
17. M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh: Acta Mater., 2006, vol. 54, pp. 539–48.10.1016/j.actamat.2005.08.046 ↗
18. W. Tu and T.M. Pollock: in 11th International Symposium on Superalloys, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, p. 395.
19. J.W. Edington, K.N. Melton, and C.P. Cutler: Prog. Mater. Sci., 1976, vol. 21, pp. 63–170.10.1016/0079-6425(76)90005-0 ↗
20. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, Prentice Hall, Upper Saddle River, NJ, 1999.
21. J.W. Edington: Metall. Trans. A, 1982, vol. 13A, pp. 703–15.10.1007/BF02642384 ↗
22. O.A. Kaibyshev: Superplasticity of Alloys, Intermetallics, and Ceramics, Springer-Verlag, New York, NY, 1992.10.1007/978-3-642-84673-1 ↗
23. A.K. Mukherjee: Annu. Rev. Mater. Sci., 1979, vol. 9. pp. 191–217.10.1146/annurev.ms.09.080179.001203 ↗
24. R.G. Menzies, G.J. Davies, and J.W. Edington: Met. Sci., 1982, vol. 16, pp. 483–94.10.1016/0036-9748(82)90254-X ↗
25. M.A. Clark and T.H. Alden: Acta Metall., 1973, vol. 21, pp. 1195–206.10.1016/0001-6160(73)90160-0 ↗
26. K. Holm, J.D. Embury, and G.R. Purdy: Acta Metall., 1977, vol. 25, pp. 1191–1200.10.1016/0001-6160(77)90207-3 ↗
27. M.K. Rabinovich and V.G. Trifonov: Acta Mater., 1996, vol. 44, pp. 2073–78.10.1016/1359-6454(95)00263-4 ↗
28. D.J. Sherwood and C.H. Hamilton: Scripta Metall. Mater., 1991, vol. 25, pp. 2873–78.10.1016/0956-716X(91)90172-W ↗
29. D.S. Wilkinson and C.H. Caceres: Acta Metall., 1984, vol. 32, pp. 1335–45.10.1016/0001-6160(84)90079-8 ↗