journal article·2021-01

Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 °C to 800 °C

Sumanta Bagui, Bibhu Prasad Sahu, Kinkar Laha, Soumitra Tarafder, Rahul Mitra

Publisher page

Abstract

Creep behavior of the Inconel 617 alloy has been investigated through tests carried out in the temperature range of 650 °C to 800 °C under 95 to 350 MPa. Creep curves obtained from tests on the alloy exhibit a non-classical nature, with the primary creep rate decreasing to a minimum value, followed by a typical increase, which is either continuous at temperatures ≤ 700 °C or has an intermediate steady-state regime at 750 °C or 800 °C. The variation of minimum creep rate (έmin) with stress (σ) obeys the power law relationship (έmin = Aσn), with the stress exponent, n, increasing with temperature to a peak value at ~ 700 °C. The value of n > 5 has been rationalized by considering the existence of threshold stress, which like n has been found to decrease sharply with temperature beyond 700 °C. Investigation of the post-creep microstructures by transmission electron microscope has revealed the formation of γ′ and M23C6 precipitates, which obstruct dislocation motion during the primary stage. Microstructures of the samples creep-tested at ≥ 750 °C have exhibited relatively smaller amounts of γ′. The existence of threshold stress and the steady-state regime in the tertiary creep stage has been ascribed to obstruction of dislocation motion by M23C6 and γ′ precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. 1) S. K. Sharma, C. Jang, K. J. Kang: Journal of Nuclear materials, 2009, vol. 389, pp. 420-26.10.1016/j.jnucmat.2009.02.029 ↗
2. 2) Woo-Gon Kim, Song-Nan Yin, Gyeong-Geo Lee, Yong-Wan Kim, Seon-Jin Kim: International journal of pressure vessels and piping, 2010, vol. 87, pp. 289-95.10.1016/j.ijpvp.2010.03.008 ↗
3. 3) Ajit K. Roy, Muhammad H. Hasan, Joydeep Pal: Materials science and engineering A, 2009, vol. 520, pp. 184-88.10.1016/j.msea.2009.05.029 ↗
4. W.-G. Kim, J.-Y. Park, I. M. W. Ekaputra, S.-J. Kim, M.-H. Kim, Y.-W. Kim: Eng. Fail. Anal., 2015, vol. 58, pp. 441-51.10.1016/j.engfailanal.2015.07.041 ↗
5. 5) Woo-Gon Kim, Gyeong-Geun Lee, Ji-Yeon Park, Sung-Deok Hong, Yong-Wan Kim: Procedia Engineering, 2013, vol. 55, pp. 819-22.10.1016/j.proeng.2013.03.337 ↗
6. 6) P. S. Shankar, K. Natesan: Journal of Nuclear Materials, 2007, vol. 366, pp. 28-36.10.1016/j.jnucmat.2006.12.028 ↗
7. 7) S. Chomette, J.-M. Gentzbittel, B. Viguier: Journal of nuclear materials, 2010, vol. 399, pp. 266-74.10.1016/j.jnucmat.2010.01.019 ↗
8. 8) R. Viswanathan, W. Bakker: Journal of Materials Engineering and Performance, 2001, vol. 10, pp. 81-95.10.1361/105994901770345394 ↗
9. 9) S. F. Di Martino, R. G. Faulkner, S. C. Hogg, S. Vujic, O. Tossa: Materials science and engineering A, 2014, vol. 619, pp. 77-86.10.1016/j.msea.2014.09.046 ↗
10. 10) W. Z. Wang, T. Jin, J. H. Jia, J. L. Liu, Z. Q. Hu: Materials Science & Engineering A, 2015, vol. 624, pp. 220–28.10.1016/j.msea.2014.11.038 ↗
11. 11) Robert N. Jarrett and John K. Tien: Metallurgical Transactions A, 1982, vol. 13, pp. 1021-32.10.1007/BF02643399 ↗
12. 12) Elisabetta Gariboldi, Marcello Cabibbo, Stefano Spigarelli, Dario Ripamonti: International journal of pressure vessels and piping, 2008, vol. 85, pp. 63-71.10.1016/j.ijpvp.2007.06.014 ↗
13. 13) Quanyan Wu, Hyojin Song, Robert W. Swindeman, John P. Shingledecker, Vijay K. Vasudevan: Metallurgical and Materials Transactions A, 2008, vol. 39A, pp. 2569-85.
14. 14) W. L. Mankins, J. C. Hosier, T. H. Bassford: Metallurgical Transactions, 1974, vol. 5, pp. 2579-90.10.1007/BF02643879 ↗
15. 15) Julian K. Benz, Laura J. Carroll, Jill K. Wright, Richard N. Wright, Thomas M. Lillo: Metallurgical and Materials Transactions A, 2014, vol. 45A, pp. 3010-22.10.1007/s11661-014-2244-y ↗
16. S. Yamasaki, M. Mitsuhara, H. Nakashima: Mater. Trans., 2017, vol. 58, 442–449.10.2320/matertrans.M2016407 ↗
17. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: in Quantitative Relation Between Properties and Microstructure, D.G. Brandon and A. Rosen, eds., Israel Universities Press, Jerusalem, 1969, pp. 255–342.
18. 18) I. Charit, K.L. Murty: J. Nucl. Mater., 2008, vol. 374, pp. 354–63.10.1016/j.jnucmat.2007.08.019 ↗
19. 19) M. McLean: Acta Metall., 1985, vol. 33, pp. 545-56.10.1016/0001-6160(85)90018-5 ↗
20. 20) Y. Han, M.C. Chaturvedi: Mat. Sci. Eng., 1987, vol. 85, pp. 59-65.10.1016/0025-5416(87)90467-8 ↗
21. Publication Number: SMC-029, Special Metals Corporation, USA, March 2005, pp. 1–11.
22. 22) Triratna Shrestha, Mehdi Basirat, Indrajit Charit, Gabriel P. Potirniche, Karl K. Rink, Uttara Sahaym: Journal of Nuclear Materials, 2012, vol. 423, pp. 110–119.10.1016/j.jnucmat.2012.01.005 ↗
23. N.Q. Vo, C.H. Liebscher, M.J.S. Rawlings, M. Asta, D.C. Dunand: Acta Mater., 2014, vol. 71, pp. 89–99.10.1016/j.actamat.2014.02.020 ↗
24. 24) S.K. Sharma, G.D. Ko, F.X. Li, K.J. Kang: J. Nucl. Mater., 2008, vol. 378, pp. 144–152.10.1016/j.jnucmat.2008.04.021 ↗
25. 25) J. Weertman and P. Shahinian: J. Met., 1956, vol. 8, pp. 1223–26.
26. R. Lagneborg, B. Bergman: Metal Sci., 1976, pp. 20–28.10.1179/030634576790431462 ↗
27. 27) L.G. Vettraino, M. Zhang, J.L.W. Carter, J.R. Groza, J.C. Gibeling: Materials Science & Engineering A, 2019, vol. 756, pp. 538–44.10.1016/j.msea.2019.04.074 ↗
28. 28) Oleg D. Sherby, Eric M. Taleff: Materials Science and Engineering A, 2002, vol. 322, pp. 89–99.10.1016/S0921-5093(01)01121-2 ↗
29. 29) K. Schneider, W. Hartnagel, P. Schepp, B. Ilschner: Nucl. Technol., 1984, vol. 66, pp. 289–95.10.13182/NT84-A33432 ↗
30. 30) Burgess, H. and Smoluchowski, R.: J. Appl. Phys., 1955, vol. 26, pp. 491-92.10.1063/1.1722026 ↗
31. 31) G. Neumann, V. Tolle: Philosophical Magazine A, 1986, vol. 54, pp. 619-29.10.1080/01418618608244022 ↗
32. S. ShahabNaghavi, V.I. Hegde, C. Wolverton: Acta Mater., 2017, vol. 132, pp. 467–78.10.1016/j.actamat.2017.04.060 ↗
33. 33) J. N. Mundy, H. A. Hoff, J. Pelleg, S. J. Rothman, L. J. Nowicki, and F. A. Schmidt: Phys. Rev. B, 1981, vol. 24, pp. 658-65.10.1103/PhysRevB.24.658 ↗
34. 34) J. Askill, D. H. Tomlin: The Philosophical Magazine: A journal of Theoretical and Applied Physics, 1963, vol. 8, pp. 997-01.10.1080/14786436308214459 ↗
35. 35) Ram Krishna, Helen V. Atkinson, Sarah V. Hainsworth, Simon P. Gill: Metallurgical and Materials Transactions A, 2016, vol. 47A, pp. 178-93.10.1007/s11661-015-3193-9 ↗
36. 36) Magdalena Speicher, Florian Kauffmann, Jae-Hyeok Shim, Mahesh Chandran: Materials Science & Engineering A, 2018, vol. 711, pp. 165–74.10.1016/j.msea.2017.11.004 ↗
37. 37) W. Ren, R. Swimdeman: J. Press. Ves. Tech., 2009, vol. 131, 024002.10.1115/1.2967885 ↗