The Effects of Post-processing in Additively Manufactured 316L Stainless Steels
Source abstract
Abstract
This paper provides a systematic examination of microstructure and corrosion behavior of additively manufactured 316L stainless steel after post-processing by surface finishing, isothermal heat treating, or hot isostatic pressing. The effects of isothermal heat treatments from 500 °C to 1300 °C and hot isostatic press processing from 1000 °C to 1200 °C were correlated to the evolution of microstructure, pore morphology and volume fraction, microhardness measurements, and corrosion behavior to reveal the different post-processing temperature regimes and their corresponding characteristics. In particular, this study found that the AM 316L microstructures and properties are stable up to nearly 800 °C. Higher temperatures eliminate the fine solidification structure, causing a drop in microhardness and corrosion resistance. Corrosion was primarily driven by the porosity content of the exposed surface and near-surface regions, which is unaffected by isothermal or HIP post-processing, and the corrosion was not significantly affected by recrystallization, which begins around 1050 °C and is nearly complete by 1200 °C. The amount of porosity was not markedly affected by isothermal post-processing, but could be significantly reduced by HIP processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. 1. I. Gibson, D.W. Rosen, and B. Stucker, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, 2010, Springer, New York.10.1007/978-1-4419-1120-9 ↗
2. 2. W.E. Frazier, J Mat Eng Perf, 2014, 23(6), 1917-1928.10.1007/s11665-014-0958-z ↗
3. 3. J.-P. Kruth, M.C. Leu, T. Nakagawa, Annals of the ClRP, 1998, 47(2), 525-540.10.1016/S0007-8506(07)63240-5 ↗
4. ASTM International Designation F2792-12a, Standard Terminology for Additive Manufacturing Technologies, 2013.
5. 5. W. J. Sames, F. A. List, S. Pannala, R. R. Dehoff, and S. S. Babu, International Materials Reviews, 2016, 61(5), 315-360.10.1080/09506608.2015.1116649 ↗
6. 6. J.J. Lewandowski and M. Seifi, Annu Rev Mater Res, 2016, 46, 151–186.10.1146/annurev-matsci-070115-032024 ↗
7. American Society for Metals: Metals Handbook; Ninth Edition; Volume 3: Properties and Selection: Stainless Steels, Tool Materials and Special-Purpose Metals, American Society for Metals, Metals Park, OH, 1980, pp. 3–40.
8. 8. E. Otero, A. Pardo, M.V. Utrilla, E. Sáenz, and J.F. Álvarez, Corrosion Science, 1998, 40(8), 1421-1434.10.1016/S0010-938X(98)00047-X ↗
9. 9. D. Itzhak and E. Albion, Corrosion Science, 1983, 23(10) 1085-1094.10.1016/0010-938X(83)90090-2 ↗
10. 10. G. Sander, J. Tan, P. Balan, O. Gharbi, D.R. Feenstra, L. Singer, S. Thomas, R.G. Kelly, J.R. Scully, and N. Birbilis, Corrosion, 2018, 74(12) 1318-1350.10.5006/2926 ↗
11. 11. Q. Chao, V. Cruz, S. Thomas, N. Birbilis, P. Collins, A. Taylor, P.D. Hodgson, and D. Fabijanic, Scripta Materialia, 2017, 141, 94–98.10.1016/j.scriptamat.2017.07.037 ↗
12. 12. G. Sander, S. Thomas, V. Cruz, M. Jurg, N. Birbilis, X. Gao, M. Brameld, and C. R. Hutchinson, J Electrochem Soc, 2017, 164, C250-C257.10.1149/2.0551706jes ↗
13. 13. A.H. Ettefagh and S. Guo, Additive Manufacturing, 2018, 22, 153–156.10.1016/j.addma.2018.05.014 ↗
14. 14. P. Ganesh, R. Giri, R. Kaul, P.R. Sankar, P. Tiwari, A. Atulkar, R.K. Porwal, R.K. Dayal, and L.M. Kukrej, Mater Des, 2012, 39, 509-521.10.1016/j.matdes.2012.03.011 ↗
15. 15. M. Ziętala, T. Durejko, M. Polański, I. Kunce, T. Płociński, W. Zieliński, M. Łazińska, W. Stępniowski, T. Czujko, K.J. Kurzydłowski, and Z. Bojar, Materials Science & Engineering A, 2016, 677, 1–10.10.1016/j.msea.2016.09.028 ↗
16. 16. Y. Sun, A. Moroz, and K. Alrbaey, J Mater Eng Perform, 2014, 23, 518-526.10.1007/s11665-013-0784-8 ↗
17. 17. J.R. Trelewicz, G.P. Halada, O.K. Donaldson, and G. Manogharan, JOM, 2016, 68(3), 850-859.10.1007/s11837-016-1822-4 ↗
18. 18. K. Geenen, A. Röttger, and W. Theisen, Materials and Corrosion, 2017, 68, 764–775.10.1002/maco.201609210 ↗
19. 19. J.A. Stull, M.A. Hill, T.J. Lienert, J. Tokash, K.R. Bohn, D.E. Hooks, JOM, 2018, 70(11) 2677-2683.10.1007/s11837-018-3123-6 ↗
20. 20. J. Stendal, O. Fergani, H. Yamaguchi, and N. Espallargas, J Bio Tribo Corros, 2018, 4, 9.10.1007/s40735-017-0125-9 ↗
21. 21. X. Lou, P.L. Andresen, and R.B. Rebak, J Nucl Mater, 2018, 499, 182-190.10.1016/j.jnucmat.2017.11.036 ↗
22. 22. X. Lou, M. Song, P.W. Emigh, M.A. Othon, and P.L. Andresen, Corros Sci, 2017, 128, 140-153.10.1016/j.corsci.2017.09.017 ↗
23. P.A. Kuznetsov, A.V. Krasikov, M.V. Staritsyn, S.Yu, Mushnikova, and O.N. Parmenova: Protect. Met. Phys. Chem. Surf., 2018, vol. 54(3), pp. 484–89. Original Russian Text: P.A. Kuznetsov, A.V. Krasikov, M.V. Staritsyn, S.Yu. Mushnikova, and O.N. Parmenova: Fizikokhimiya Poverkhnosti i Zashchita Materialov, 2018, vol. 54(3), pp. 312–18.10.1134/S2070205118030085 ↗
24. 24. A. Röttger, K. Geenen, M. Windmann, F. Binner, and W. Theisen, Materials Science & Engineering A, 2016, 678, 365–376.10.1016/j.msea.2016.10.012 ↗
25. 25. G.T. Gray III, V. Livescu, P.A. Rigg, C.P. Trujillo, C.M. Cady, S.R. Chen, J.S. Carpenter, T.J. Lienert, and S.J. Fensin, Acta Materialia, 2017, 138, 140-149.10.1016/j.actamat.2017.07.045 ↗
26. 26. M.S.I.N. Kamariah, W.S.W. Harun, N.Z. Khalil, F. Ahmad, M.H. Ismail, and S. Sharif, Materials Science and Engineering, 2017, 257, 012021.
27. 27. B. Blinn, M. Klein, C. Gläßner, M. Smaga, J.C. Aurich, and T. Beck, Metals, 2018, 8 (220), 1-23.
28. 28. D. Kong, X. Ni, C. Dong, L. Zhang, C. Mana, X. Cheng, and X. Li, Materials Letters, 2019, 235, 1-5.10.1016/j.matlet.2018.09.152 ↗
29. 29. L. Liu, Q. Ding, Y. Zhong, J. Zou, J. Wu, Y.-L. Chiu, J. Li, Z. Zhang, Q. Yu, and Z. Shen, Materials Today, 2018, 21(4), 354-361.10.1016/j.mattod.2017.11.004 ↗
30. X. Chen, J. Li, X. Cheng, H. Wang, and Z. Huang: Materi. Sci. Eng. A, 2018, vol. 715, pp. 307–14.10.1016/j.msea.2017.10.002 ↗
31. 31. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman, Ultramicroscopy, 2007, 107, 131–139.10.1016/j.ultramic.2006.06.008 ↗
32. 32. M.K. Miller, K.F. Russell, K. Thompson, R. Alvis, and D.J. Larson, Microsc Microanal, 2007, 13, 428–436.10.1017/S1431927607070845 ↗
33. 33. J.Y. Lee, J.-P. Ahn, Appl Microsc, 2016, 46(1), 14-19.10.9729/AM.2016.46.1.14 ↗
34. 34. T.J. Prosa and D.J. Larson, Microsc Microanal, 2017, 23, 194–209.10.1017/S1431927616012642 ↗
35. ASTM G61-86, Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys, ASTM International, 2018, West Conshohocken, PA.
36. 36. E. McCafferty, Introduction to Corrosion Science, Springer, New York, 2010, pp. 148–160.10.1007/978-1-4419-0455-3 ↗
37. G.E. Linnert: Welding Metallurgy: Carbon and Alloy Steels, Volume 1: Fundamentals, American Welding Society, Miami, 1994, pp. 788–97.
38. 38. S. Kou, Welding Metallurgy, John Wiley & Sons, New York, 1987, pp.167-172
39. 39. A.J. Birnbaum, J.C. Steuben, E.J. Barrick, A.P. Iliopoulos, and J.G. Michopoulos, Additive Manufacturing, 2019, 29, 100784.
40. Z. Sun, X. Tan, S. BengTor, and W.Y. Yeong, Mater. Des., 2016, 104, 197–204.10.1016/j.matdes.2016.05.035 ↗
41. 41. S. Gorsse, C. Hutchinson, M. Gouné and R. Banerjee, Science and Technology of Advanced Materials, 2017, 18(1), 584-610.10.1080/14686996.2017.1361305 ↗
42. 42. F. Yan, W. Xiong, E. Faiersonc, and G.B. Olson, Scripta Materialia, 2018, 155, 104–108.10.1016/j.scriptamat.2018.06.011 ↗
43. 43. Y.M. Wang, T. Voisin, J.T. McKeown, J. Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang,W. Chen, T.T. Roehling, R.T. Ott, M.K. Santala, P.J. Depond, M.J. Matthews, A.V. Hamza and T. Zhu, Nature Materials, 2018, 17, 63.10.1038/nmat5021 ↗
44. N.R. Tailleart, P.M. Natishan, F.J. Martin, R.J. Rayne, H. Kahn, and A.H. Heuer: Interstitially Hardened 316L Stainless Steel: A Surface Analytical Study of the Oxide, The Electrochemical Society, 2013.10.1149/MA2013-02/21/1832 ↗
45. 45. N.R. Tailleart, F.J. Martin, R.J. Rayne, H. Kahn, A.H. Heuer, and P.M. Natishan, ECS Transactions, 2012, 41 (25), 59-66.10.1149/1.3697578 ↗
46. 46. P.M. Natishan, R.A. Bayles, R.J. Rayne, T. Longazel, F.J. Martin, H. Kahn, and A.H. Heuer, Corrosion, 2012, 68 (7), 638-644.10.5006/0599 ↗
47. 47. F.J. Martin, E.J. Lemieux, and P.M. Natishan, Electrochemical and Solid State Letters, 2007, 10 (12) C76-C78.10.1149/1.2794282 ↗
48. 48. R.F. Schaller, A. Mishra, J.M. Rodelas, J.M. Taylor, and E.J. Schindelholz, Journal of The Electrochemical Society, 2018, 165(5), C234-C242.10.1149/2.0431805jes ↗
49. 49. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann, Acta Materialia, 2016, 117 371-392.10.1016/j.actamat.2016.07.019 ↗
50. S. Mishra and R. Dattab: Encyclopedia of Materials: Science and Technology, 2nd ed., Ed. K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, and P. Veyssière, Elsevier, 2001, pp. 2761–68.