journal article·2017-10

Bonding of Aluminum Alloys in Compound Casting

Jian Feng, Bing Ye, Lijie Zuo, Qudong Wang, Qigui Wang, Haiyan Jiang, Wenjiang Ding

Publisher page

Abstract

The influence of the coating materials, coating thickness, and casting process on the interfacial microstructure and mechanical properties of the overcast A6061 bars with aluminum A356 and A6061 alloys was studied by OM, SEM/EDS, and mechanical testing. Results indicate that Ni coating has better thermal stability than Cu coating that heavily reacts with liquid Al alloy and forms a reaction zone around 130–150 μm during gravity casting. In the gravity casting, coarse and cracked Al3Ni phase distributes along the interfacial region and degrades the mechanical properties of the overcast joints. In squeeze casting, however, fine and dispersed Ni-rich strengthening phases form uniformly in the interfacial zone and improve the metallurgical bonding of the joints. The heat transition and application of pressure during solidification are two key factors in determining the integrity and mechanical properties of the overcast joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Fuller CB, Krause AR, Dunand DC, Seidman DN: Mater. Sci. Eng. A, 2002, Vol. 338, pp. 8-16.10.1016/S0921-5093(02)00056-4 ↗
2. Fan KL, Liu XS, He GQ, Chen H: Mater. Sci. Eng. A, 2015, Vol. 632, pp. 127-36.10.1016/j.msea.2015.02.069 ↗
3. [3] Luk MJ, Mirza FA, Chen DL, Ni DR, Xiao BL, Ma ZY: Mater. Design, 2015, Vol. 66, pp. 274-83.10.1016/j.matdes.2014.10.070 ↗
4. [4] Zhao LM, Zhang ZD: Scripta Mater., 2008, Vol. 58, pp. 283-6.10.1016/j.scriptamat.2007.10.006 ↗
5. [5] Heidarzadeh A, Khodaverdizadeh H, Mahmoudi A, Nazari E: Mater. Design, 2012, Vol. 37, pp. 166-73.10.1016/j.matdes.2011.12.022 ↗
6. [6] Threadgill PL, Leonard AJ, Shercliff HR, Withers PJ: Int. Mater. Rev., 2009, Vol. 54, pp. 49-93.10.1179/174328009X411136 ↗
7. [7] Prime MB, Gnaupel-Herold T, Baumann JA, Lederich RJ, Bowden DM, Sebring RJ: Acta Mater., 2006, Vol. 54, pp. 4013-21.10.1016/j.actamat.2006.04.034 ↗
8. [8] Nandan R, Debroy T, Bhadeshia H: Prog. Mater. Sci., 2008, Vol. 53, pp. 980-1023.10.1016/j.pmatsci.2008.05.001 ↗
9. [9] Hu J, Tsai HL: Int. J. Heat Mass. Tran., 2007, Vol. 50, pp. 833-46.10.1016/j.ijheatmasstransfer.2006.08.025 ↗
10. [10] Praveen P, Yarlagadda PKDV: J. Mater. Process. Tech., 2005, Vol. 164, pp. 1106-12.10.1016/j.jmatprotec.2005.02.224 ↗
11. KY Bae, TH Lee, KC Ahn (2002) J. Mater. Process. Tech. 120:458-65.10.1016/S0924-0136(01)01216-X ↗
12. [12] Wang HY, Liu LM, Liu F: Mater. Design, 2013, Vol. 50, pp. 463-6.10.1016/j.matdes.2013.02.085 ↗
13. [13] Cao X, Jahazi M, Immarigeon JP, Wallace W: J. Mater. Process. Tech., 2006, Vol. 171, pp. 188-204.10.1016/j.jmatprotec.2005.06.068 ↗
14. [14] Dubey AK, Yadava V: Int. J. Mach. Tool. Manu., 2008, Vol. 48, pp. 609-28.10.1016/j.ijmachtools.2007.10.017 ↗
15. E Schubert, I Zerner, C Walz, G Sepold (2001) J. Mater. Process. Technol. 115:2-8.10.1016/S0924-0136(01)00756-7 ↗
16. [16] Xu G, Luo AA, Chen Y, Sachdev AK: Mater. Sci. Eng. A, 2014, Vol. 595, pp. 154-8.10.1016/j.msea.2013.11.093 ↗
17. [17] Zhang J, Luo G, Wang Y, Shen Q, Zhang L: Mater. Lett., 2012, Vol. 83, pp. 189-91.10.1016/j.matlet.2012.06.014 ↗
18. [18] Mvola B, Kah P, Martikainen J: Inter. J.Mech. Mater. Eng., 2014, Vol. 9, pp. 21-32.10.1186/s40712-014-0021-8 ↗
19. [19] Papis KJM, Loffler JF, Uggowitzer PJ: Mater. Sci. Eng. A, 2010, Vol. 527, pp. 2274-9.10.1016/j.msea.2009.11.066 ↗
20. [20] Hajjari E, Divandari M, Razavi SH, Emami SM, Homma T, Kamado S: J. Mater. Sci., 2011, Vol. 46, pp. 6491-9.10.1007/s10853-011-5595-4 ↗
21. [21] Praveen P, Yarlagadda PKDV, Kang MJ: J. Mater. Process. Tech., 2005, Vol. 164, pp. 1113-9.10.1016/j.jmatprotec.2005.02.100 ↗
22. [22] Papis KJM, Hallstedt B, Loffler JF, Uggowitzer PJ: Acta Mater., 2008, Vol. 56, pp. 3036-43.10.1016/j.actamat.2008.02.042 ↗
23. [23] Rubner M, Gunzl M, Korner C, Singer RF: Mater. Sci. Eng. A, 2011, Vol. 528, pp. 7024-9.10.1016/j.msea.2011.05.076 ↗
24. [24] Liu T, Wang Q, Sui Y, Wang Q, Ding W: Mater. Design, 2015, Vol. 68, pp. 8-17.10.1016/j.matdes.2014.11.051 ↗
25. [25] Kundu S, Anand G, Chatterjee S: Metall. Mater. Trans. A, 2013, Vol. 44A, pp. 2196-211.10.1007/s11661-012-1553-2 ↗
26. [26] Zhang J, Shen Q, Luo GQ, Li MJ, Zhang LM: Mater. Design, 2012, Vol. 39, pp. 81-6.10.1016/j.matdes.2012.02.032 ↗
27. [27] Shin SY, Ko MW, Cho DC, Lee CH, Shin KS, Park K: J. Mater. Sci. Lett., 2002, Vol. 21, pp. 903-6.10.1023/A:1016092818067 ↗
28. [28] Xu J, Tao J, Chen ZY, Zhu WH, Jiang SY, Xu Z: Surf. Coat. Tech., 2007, Vol. 202, pp. 577-82.10.1016/j.surfcoat.2007.06.034 ↗
29. [29] Chen SH, Huang JH, Ma K, Zhang H, Zhao XK: Mater. Lett., 2012, Vol. 79, pp. 296-9.10.1016/j.matlet.2012.03.073 ↗
30. [30] Sun M, Niknejad ST, Zhang G, Lee MK, Wu L, Zhou Y: Mater. Design, 2015, Vol. 87, pp. 905-13.10.1016/j.matdes.2015.08.097 ↗
31. [31] Liu T, Wang Q, Sui Y, Wang Q, Ding W: Mater. Design, 2016, Vol. 89, pp. 1137-46.10.1016/j.matdes.2015.10.072 ↗
32. [32] Zhang S, Yuan GY, Lu C, Ding WJ: J. Alloy. Compd., 2011, Vol. 509, pp. 3515-21.10.1016/j.jallcom.2010.12.136 ↗
33. [33] Erdélyi G, Beke DL, Kedves FJ, Gödény I: Philos. Mag. B, 1978, Vol. 38, pp. 445-62.10.1080/13642817808246394 ↗
34. [34] Ceresara S: Phys. Stat. solid. B, 1968, Vol. 27, pp. 517-20.10.1002/pssb.19680270207 ↗
35. [35] Wei Y, Li J, Xiong J, Zhang F: Engineering Science and Technology, an International Journal, 2016, Vol. 19, pp. 90-95.10.1016/j.jestch.2015.05.009 ↗
36. [36] Shi D, Wen B, Melnik R, Yao S, Li T: J. Solid. State. Chem., 2009, Vol. 182, pp. 2664-69.10.1016/j.jssc.2009.07.026 ↗
37. [37] Miettinen J: Calphad., 2005, Vol. 29, pp. 40-48.10.1016/j.calphad.2005.02.002 ↗
38. [38] Brunelli K, Peruzzo L, Dabala M: Mater. Chem. Phys., 2015, Vol. 149, pp. 350-58.10.1016/j.matchemphys.2014.10.028 ↗
39. [39] Chaliampalias D, Andronis S, Pliatsikas N, Pavlidou E, Tsipas D, Skolianos S: Surf. Coat. Tech., 2014, Vol. 255, pp. 62-68.10.1016/j.surfcoat.2013.12.057 ↗
40. [40] Lloyd DJ, Gallerneault M, Wagstaff RB: Metall. Mater. Trans. A, 2010, Vol. 41, pp. 2093-103.10.1007/s11661-010-0298-z ↗
41. [41] Lü S, Wu S, Dai W, Lin C, An P: J. Mater. Proces. Technol., 2012, Vol. 212, pp. 1281-87.10.1016/j.jmatprotec.2012.01.018 ↗
42. MR Ghomashchi, A Vikhrov (2000) J. Mater. Proces. Technol. 101:1-9.10.1016/S0924-0136(99)00291-5 ↗