Investigation of Tribological Behavior of a Novel Hybrid Composite Prepared with Al-Coconut Shell Ash Mixed with Graphite
Source abstract
Abstract
The present investigation develops a next-generation hybrid Al metal matrix composite using coconut shell ash (CSA) and graphite (Gr) reinforcement. Stir-casting is adapted to prepare an Al-1100-based composite. Three other composites of Al-Al2O3, Al-Al2O3-Gr, and Al-CSA are prepared that contain equivalent volume fractions of Al2O3, CSA, and Gr. These assist in comparisons among the three composites and the developed hybrid Al-CSA-Gr composite. The study reveals that the addition of 3 pct Gr improves the specific strength, toughness, and tribological properties. The Al-CSA composite shows better mechanical properties, such as tensile strength and hardness, than the other three composites. Gr addition helps the hybrid Al-CSA-Gr composite to attain better tribological properties with a slightly lower specific strength. Scanning electron microscopy studies of the worn material surfaces corroborate the findings of the abrasion testing. Elemental analyses by energy-dispersive X-ray spectroscopy of the debris from the counter-face of the tribo surface confirm the presence of Al, O, Si, Fe, Mn, and C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. P.K. Rohatgi, B. F. Schultz, A. Daoud, and W.W. Zhang: Tribiology Int., 2010, vol. 43, pp. 455–66.10.1016/j.triboint.2009.07.010 ↗
2. D.B. Miracle: Compos. Sci. Technol., 2005, vol. 65, pp. 2526–40.10.1016/j.compscitech.2005.05.027 ↗
3. C.A. Rodopoulos: in Adv. Mater. by Des., 2004, pp. 99–117.
4. M. Rosso: J. Mater. Process. Technol., 2006, vol. 175, pp. 364–75.10.1016/j.jmatprotec.2005.04.038 ↗
5. Pradeep K. Rohatgi: Def. Sci. J., 1993, vol. 43, pp. 323–49.10.14429/dsj.43.4336 ↗
6. J.E. Hatch: in ASM Int., ASM, ed., Ohio, USA, 1984, pp. 1–24.
7. A. Urena, J. Rams, M. Campo, and M. Sánchez: Wear, 2009, vol. 266, pp. 1128–36.10.1016/j.wear.2009.03.016 ↗
8. S. N. Aqida, M. I. Ghazali, and J. Hashim: J. Miner. Mater. Charact. Eng., 2004, vol. 9, pp. 17–32.
9. J. Sudeepan, K. Kumar, T. K. Barman, and P. Sahoo: J. Inst. Eng. Ser. C, 2015, vol. 97, pp. 41–53.10.1007/s40032-015-0192-y ↗
10. T. P. Murali, M. K. Surappa, and P. K. Rohatgi: Metall. Trans. B, 1982, vol. 13, pp. 485–94.10.1007/BF02667765 ↗
11. N. Chawla and Yu-lin Shen: Adv. Eng. Mater., 2001, vol. 3, pp. 357–70.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
12. D.F. Adams: Composites, 1987, vol. 18, p. 261.10.1016/0010-4361(87)90420-4 ↗
13. Y. L. Shen, J. J. Williams, G. Piotrowski, N. Chawla, and Y. L. Guo: Acta Mater., 2001, vol. 49, pp. 3219–29.10.1016/S1359-6454(01)00226-9 ↗
14. M.O. Bodunrin, K.K. Alaneme, and L. H. Chown: J MATER RES TECHNOL, 2015, vol. 4, pp. 434–45.10.1016/j.jmrt.2015.05.003 ↗
15. R. N. Rao and S. Das: Tribiology Int., 2011, vol. 44, pp. 454–62.10.1016/j.triboint.2010.11.018 ↗
16. R. Govindarao, R. I. Ganguly, R. R. Dash, P. Surya Prakash Rao, G. S. Reddy, and S. K. Singh: Trans. Indian Inst. Met., 2015, vol. 68, pp. 951–58.10.1007/s12666-015-0532-x ↗
17. M. Kök and K. Özdin: J. Mater. Process. Technol., 2007, vol. 183, pp. 301–9.10.1016/j.jmatprotec.2006.10.021 ↗
18. Y. Sahin and K. Ozdin: Mater. Des., 2008, vol. 29, pp. 728–33.10.1016/j.matdes.2007.02.013 ↗
19. N. Altinkok, I. Özsert, and F. Findik: ACTA Phys. Pol. A, 2013, vol. 124, pp. 11–19.10.12693/APhysPolA.124.11 ↗
20. R. Ipek: J. Mater. Process. Technol., 2005, vol. 162–163, pp. 71–75.10.1016/j.jmatprotec.2005.02.207 ↗
21. R. Bauri and M. K. Surappa: Wear, 2008, vol. 265, pp. 1756–66.10.1016/j.wear.2008.04.022 ↗
22. S. Suresh, N.S.V. Moorthi, S. C. Vettivel, and N. Selvakumar: Mater. Des., 2014, vol. 59, pp. 383–96.10.1016/j.matdes.2014.02.053 ↗
23. B.S. Ünlü: Mater. Des., 2008, vol. 29, pp. 2002–08.10.1016/j.matdes.2008.04.014 ↗
24. S. B. Venkata Siva, R. I. Ganguly, G. Srinivasa Rao, and K. L. Sahoo: Tribol. - Mater. Surfaces Interfaces, 2014, vol. 8, pp. 117–24.10.1179/1751584X13Y.0000000050 ↗
25. S. B. Venkata Siva, K. L. Sahoo, R. I. Ganguly, R. R. Dash, S. K. Singh, B. K. Satpathy, and G. Srinivasarao: Metall. Mater. Trans. B, 2013, vol. 44, pp. 800–08.10.1007/s11663-013-9832-x ↗
26. M. K. Surappa: Sadhana, 2003, vol. 28, pp. 319–34.10.1007/BF02717141 ↗
27. S.M. Lee, J.H. Jung, E. Fleury, W.T. Kim, and D.H. Kim: Mater. Sci. Eng. A, 2000, vol. 294–296, pp. 99–103.10.1016/S0921-5093(00)01223-5 ↗
28. G.E. Totten, and D.S. MacKenzie: Handbook of Aluminum; Volume 1: Physical Metallurgy and Processes, 2003.10.1201/9780203912591 ↗
29. S. Y. Aku, D. S. Yawas, and A. Apasi: Gazi Univ. J. Sci., 2013, vol. 26, pp. 449–57.
30. K.K. Alaneme, M.T. Adewale, and A.P. Olubambi: J. Mater. Res. Technol., 2014, vol. 3, pp. 9–16.10.1016/j.jmrt.2013.10.008 ↗
31. C. U. Atuanya, A.O.A. Ibhadode, and I. M. Dagwa: Results Phys., 2012, vol. 2, pp. 142–49.10.1016/j.rinp.2012.09.003 ↗
32. S.B. Hassan, and V.S. Aigbodion: J. King Saud Univ. Eng. Sci., 2015, vol. 27, pp. 49–56.10.1016/j.jksus.2014.04.003 ↗
33. P. K. Rohatgi, A. Daoud, B. F. Schultz, and T. Puri: Compos. Part A, 2009, vol. 40, pp. 883–96.10.1016/j.compositesa.2009.04.014 ↗
34. R. Siva Sankara Raju, M.K. Panigrahi, R.I. Ganguly, and G. Srinivasa Rao: in 31st Indian Eng. Congr., IEI(India) Nilanjan senpupta, ed., Technical, Allied Publishers Pvt. Ltd, Kolkata, 2016, pp. 241–45.
35. S. B. Venkata Siva, R. I. Ganguly, G. Srinivasarao, and K. L. Sahoo: Mater. Manuf. Process., 2013, vol. 28, pp. 1082–89.10.1080/10426914.2013.811734 ↗
36. S. Mahdavi and F. Akhlaghi: Tribol. Lett., 2011, vol. 44, pp. 1–12.10.1007/s11249-011-9818-2 ↗
37. J. Singh: Friction, 2016, vol. 4, pp. 191–207.10.1007/s40544-016-0116-8 ↗
38. P. Ravindran, K. Manisekar, P. Rathika, and P. Narayanasamy: Mater. Des., 2013, vol. 45, pp. 561–70.10.1016/j.matdes.2012.09.015 ↗
39. A. Baradeswaran, and A. Elaya Perumal: Compos. Part B, 2014, vol. 56, pp. 464–71.10.1016/j.compositesb.2013.08.013 ↗
40. S. Venkat Prasat, and R. Subramanian: Ind. Lubr. Tribol., 2013, vol. 65, pp. 399–408.10.1108/ILT-05-2011-0031 ↗
41. M. Kök: Compos. Part A Appl. Sci. Manuf., 2006, vol. 37, pp. 457–64.10.1016/j.compositesa.2005.05.038 ↗
42. B. G. Park, A. G. Crosky, and A. K. Hellier: Compos. Part B Eng., 2008, vol. 39, pp. 1270–79.10.1016/j.compositesb.2008.01.005 ↗
43. D.P. Mondal, S. Das, A.K. Jha, and A.H. Yegneswaran: Wear, 1998, vol. 223, pp. 131–38.10.1016/S0043-1648(98)00278-6 ↗
44. M.A. Baghchesara, H. Abdizadeh, and H.R. Baharvandi: Int. J. Mod. Phys. Conf. Ser., 2012, vol. 5, pp. 607–14.10.1142/S201019451200253X ↗
45. M. Kenny, and T. Oates: in Ullmann’s Encycl. Ind. Chem., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2007.