journal article·2017-01

Grain Coarsening of Cast Magnesium Alloys at High Cooling Rate: A New Observation

Yahia Ali, Guoqiang You, Fusheng Pan, Ming-Xing Zhang

Publisher page

Abstract

Most studies in the area of grain refinement have always taken for granted that higher cooling rate results in finer grains. However, when microstructural variation of the as-cast Mg with cooling rate was investigated using a specially designed V-shaped copper mold, the results were different. Although fast cooling during solidification led to microstructural refining in pure Mg, grain coarsening was observed at a higher cooling rate in Mg alloys that were inoculation treated with 1.0wt pctZr and 1.4wt pctCaO, and in the Mg-Al binary alloys. It is considered that the grain coarsening at higher cooling rate was attributed to the smaller constitutional undercooling zone formed at fast cooling due to the high temperature gradient in the three Mg alloys. These results can help in redefining the role of cooling rate in the grain refinement process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. L. Lu, A.K. Dahle, D.H. StJohn: Scripta Mater, 2005, vol. 53, pp. 517-522.10.1016/j.scriptamat.2005.05.008 ↗
2. Y. Ali,D. Qiu, B. Jiang, F. Pan, M.X. Zhang: J. Alloys Compd, 2015, vol. 619(0), pp. 639-651.10.1016/j.jallcom.2014.09.061 ↗
3. S. Guo, Q. Le, Z. Zhao, Z. Wang, J. Cui: Metall. Mater. Trans. A, 2005, vol. 404(1–2), pp. 323-329.
4. Y.X. Jin, L. Hua, X. Xu, Q. Peng: Mater. Sci., 2009, vol. 27(1), pp. 171–185.
5. H. Han, S. Liu, L. Kang, L. Liu (2008) J. Wuhan Univ. Tech. Mater. Sci. 23(2):194-197.10.1007/s11595-006-2194-3 ↗
6. M. Qian, A. Ramirez, A. Das (2009) J. Cryst. Growth. vol. 311(14), pp. 3708-3715.10.1016/j.jcrysgro.2009.04.036 ↗
7. M. Qian, A. Ramirez: Magnesium Alloys - Design, Processing and Properties, InTech. 2011, pp. 163-186.
8. A. Ramirez, M. Qian, B. Davis, T. Wilks, D.H. StJohn: Scripta Mater., 2008, vol. 59(1), pp. 19-22.10.1016/j.scriptamat.2008.02.017 ↗
9. D.H. StJohn, M. A. Easton, M. Qian, J. A. Taylor: Metall. Mater. Trans. A., 2012, vol. 44(7), pp. 2935-2949.10.1007/s11661-012-1513-x ↗
10. J. Campbell: Castings, 2nd Ed., Butterworth-Heinemann, Oxford, 2003.
11. S. Pang, G. Wu, W. Liu, M. Sun, Y. Zhang, Z. Liu, W. Ding: Mater. Sci. Eng. A., 2013, vol. 562, pp. 152-160.10.1016/j.msea.2012.11.016 ↗
12. J.N. Wang, K. Xie: Scripta Mater., 2000, vol. 43(5), pp. 441-446.10.1016/S1359-6462(00)00419-X ↗
13. H.B. Dong, P.D. Lee: Acta Mater., 2005, vol. 53(3), pp. 659-668.10.1016/j.actamat.2004.10.019 ↗
14. D.H. StJohn, M. Qian, M. A. Easton, P. Cao, Z. Hildebrand: Metall. Mater. Trans. A., 2005, vol. 36A, pp. 1671-1679.
15. M.Easton, D. StJohn: Metall. Mater. Trans. A., 1999, vol. 30(6), pp. 1625-1633.10.1007/s11661-999-0099-4 ↗
16. M.Easton, D. StJohn: Metall. Mater. Trans. A., 1999, vol. 30(6), pp. 1613-1623.10.1007/s11661-999-0098-5 ↗
17. B.L. Bramfitt: Metall. Trans. A., 1970, vol. 1 pp. 1987-1995.10.1007/BF02642799 ↗
18. P.M. Kelly, M.X. Zhang: Mater. Forum, 1999 vol. 23, pp. 41-62.
19. A.L. Greer, A. M. Bunn, A. Tronche, P.V. Evans, D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823-2835.10.1016/S1359-6454(00)00094-X ↗
20. D. Qiu, M. X. Zhang, P.M. Kelly: Scripta Mater., 2009, vol. 61(3) pp. 312-315.10.1016/j.scriptamat.2009.04.011 ↗
21. Q. Ma, D.H. StJohn, M.T. Frost.: Scripta Mater., 2002, vol. 46(9), pp. 649-654.10.1016/S1359-6462(02)00046-5 ↗
22. Y. Ali, D. Qiu, B. Jiang, F. Pan, M.X. Zhang: Scripta Mater., 2016, vol. 114, pp. 103-107.10.1016/j.scriptamat.2015.12.015 ↗
23. H.M. Fu, D. Qiu, M.X. Zhang, H. Wang, P. M. Kelly, J. A. Taylor: J. Alloys Compd., 2008, vol. 456(1-2), pp. 390-394.
24. M.Qian, D.H. Stjohn, M.T. Frost: Magnesium Technology. In: H.I. Kaplan (ed.) Magnesium Technology. TMS, Warrendale (2003).
25. M. Qian, A. Das: Scripta Mater., 2006, vol. 54, pp. 881-886.10.1016/j.scriptamat.2005.11.002 ↗
26. M. Johnsson: Thermochim. Acta., 1995, vol. 256(1) pp. 107-121.10.1016/0040-6031(94)02167-M ↗
27. M.A. Easton, D.H. StJohn: Mater. Sci. Eng. A, 2008, vol. 486(1–2), pp. 8-13.10.1016/j.msea.2007.11.009 ↗
28. F. Ochoa, J.J. Williams N. Chawla: J. Electron. Mater., 2003, vol. 32(12), pp. 1414-1420.10.1007/s11664-003-0109-z ↗
29. Y. Zuo, J. Cui, Z. Zhao, Q. Zhu, F. Qu, X. Wang (2008) Chin. J. Rare Met., 32(5): 589-592.
30. J.H. Perepezko: Prog. Mater Sci. 2004, vol. 49(3–4), pp. 263-284.10.1016/S0079-6425(03)00028-8 ↗
31. 31. J.A. Spittle: Int. Mater. Rev., 2006, vol. 51(4) pp. 247-269.10.1179/174328006X102493 ↗
32. J. Hunt: Mater. Sci. Eng., 1984, vol. 65(1) pp. 75-83.10.1016/0025-5416(84)90201-5 ↗
33. D.H. StJohn, M. Qian, M. A. Easton, P. Cao: Acta Mater., 2011 vol. 59(12) pp. 4907-4921.10.1016/j.actamat.2011.04.035 ↗
34. W. Yang, G.S. Peng, Z. Fan: in ICASP-4, 2014. London.
35. MATLAB R2013b, 2013, MathWorks Inc. Natick, MA, USA.
36. E-112, A: 2010, ASTM International USA.
37. B.S. Murty, S.A. Kori, M. Chakraborty: Int. Mater. Rev., 2002, vol. 47(1), pp. 3-29.10.1179/095066001225001049 ↗
38. S.A. Kori, B.S. Murty, M. Chakraborty: J. Mater. Sci. Technol., 1999, vol. 15(9), pp. 986-992.10.1179/026708399101506823 ↗
39. D. Qiu, J.A. Taylor, M.X. Zhang, P.M. Kelly: Acta Mater. 2007, vol. 55(4), pp. 1447-1456.10.1016/j.actamat.2006.09.046 ↗
40. W. Kurz and D.J. Fisher: Fundamentals of solidification, 4th ed., Trans Tech Publications, Switzerland, 2005.
41. J.A. Dantzig, M. Rappaz: Solidification, 1st ed., EFPL Press, London, 2009.10.1201/9781439808030 ↗
42. B. C. Zhou, S. L. Shang, Y. Wang, Z. K. Liu, Acta Mater., 2016, vol. 103, pp. 573-586.10.1016/j.actamat.2015.10.010 ↗