journal article·2016-11

A Study on the Electrodeposited Cu-Zn Alloy Thin Films

Rasim Özdemir, İsmail Hakkı Karahan, Orhan Karabulut

Publisher page

Abstract

In this article, electrochemical deposition of the nanocrystalline Cu1−x Zn x alloys on to aluminum substrates from a non-cyanide citrate electrolyte at 52.5, 105, 157.5, and 210 A m−2 current densities were described. The bath solution of the Cu1−x Zn x alloys consisted of 0.08 mol L−1 CuSO4·5H2O, 0.2 mol L−1 ZnSO4·7H2O, and 0.5 mol L−1 Na3C6H5O7. The effect of the current density on the microstrain, grainsize, phase structure, and DC electrical resistivity behavior was investigated. The electrolyte was investigated electrochemically by cyclic voltammetry (CV) studies. A scanning electron microscope (SEM) was used to study the morphologies of the deposits. Deposited alloys were investigated by energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and four-point probe electrical resistivity techniques. With an increase in applied current density values from 52.5 to 210 A m−2, the amount of deposited copper in the alloy was decreased significantly from 65.5 to 16.6 pct and zinc increased from 34.4 to 83.4 pct. An increase in the current density was accompanied by an increase in grain size values from 65 to 95 nm. SEM observations indicated that the morphology of the film surface was modified to bigger grained nanostructures by increasing the current density. The XRD analysis showed alloys have a body-centered cubic (bcc) crystal structure with preferential planes of (110) and (211). Furthermore, four-point measurements of the films revealed that the resistivity of the deposited films was tailored by varying current densities in the electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. 1. J. Chen, C. Ruffert, H.H. Gatzen, R. Bandorf, and G. Bräuer: Design and Manufacturing of Active Microsystems Microtechnology and MEMS, Springer-Verlag Berlin Heidelberg, 2011, pp. 167-88.10.1007/978-3-642-12903-2_10 ↗
2. M. Paunovic and M. Schlesinger: Fundamentals of Electrochemical Deposition, Wiley, 2006.10.1002/0470009403 ↗
3. 3. F.A. Lowenheim: Electroplating, McGraw-Hill, Columbus, OH, 1978, p. 378.
4. 4. I.A. Carlos and M.R.H. de Almeida: J. Electroanal. Chem., 2004, vol. 562, pp. 153-9.10.1016/j.jelechem.2003.08.028 ↗
5. 5. T. Vagramyan, J.S.L. Leach, and J.R. Moon: Electrochim. Acta, 1979, vol. 24, pp. 231-6.10.1016/0013-4686(79)80030-4 ↗
6. 6. A. Brenner: Electrodeposition of Alloys, vol. 1, Academic Press, New York, NY, 1963, p. 411.10.1016/B978-1-4831-9808-8.50023-X ↗
7. 7. E.M. Oliveira, G.A. Finazzi, and I.A. Carlos: Surf. Coat. Technol., 2006, vol. 200, pp. 5978-85.10.1016/j.surfcoat.2005.09.013 ↗
8. Y. Fujiwara and H. Enomoto: Surf. Coat. Technol., 1988, vol. 35, no. 1,2, pp. 101–11.10.1016/0257-8972(88)90061-8 ↗
9. 9. K. Johannsen: Surf. Finish., 2001, vol. 88, pp. 104-8.
10. 10. L.F. Senna, S.L. Díaz, and L. Sathler: J. Appl. Electrochem., 2003, vol. 33, pp. 1155-61.10.1023/B:JACH.0000003756.11862.6e ↗
11. F.L.G. Silva, D.C.B. do Lago, and L.F. Senna: J. Appl. Electrochem., 2010, vol. 40, pp. 2013–22.10.1007/s10800-010-0181-z ↗
12. I.G. Casella: J. Electroanal. Chem., 2002, vol. 520, nos. 1,2, pp. 119-25.10.1016/S0022-0728(02)00642-3 ↗
13. 13. D. Defilippo, A. Rossi, and D. Atzei: J. Appl. Electrochem., 1992, vol. 22, pp. 64-72.10.1007/BF01093013 ↗
14. 14. P. De Vreese, A. Skoczylas, E. Matthijs, J. Fransaer, and K. Binnemans: Electrochim. Acta, 2013, vol. 108, pp. 788-94.10.1016/j.electacta.2013.06.140 ↗
15. 15. V.V. Povetkin, M.S. Zakharov, and R.R. Muslimov: Russ. J. Appl. Chem., 1999, vol. 72, no. 8, pp. 1367-9.
16. 16. R. Juskenas, V. Karpavičienė, V. Pakštas, A. Selskis, and V. Kapočius: J. Electroanal. Chem., 2007, vol. 602, pp. 237-44.10.1016/j.jelechem.2007.01.004 ↗
17. 17. J.C. Ballesteros, L.M. Torres-Martínez, I. Juárez-Ramírez, G. Trejo, and Y. Meas: J. Electroanal. Chem., 2014, vol. 727, pp. 104-12.10.1016/j.jelechem.2014.04.020 ↗
18. 18. J.C. Ballesteros, C. Gomez-Solis, L.M. Torres-Martinez, and I. Juárez-Ramírez: Int. J. Electrochem. Sci., 2015, vol. 10, pp. 2892-903.10.1016/S1452-3981(23)06505-7 ↗
19. 19. A. Survila, Z. Mockus, S. Kanapeckaite, G. Stalnionis, R. Juskenas, and V. Jasulaitiene: J. Electrochem. Soc., 2013, vol. 160, pp. D428-33.10.1149/2.005310jes ↗
20. 20. L. Mattarozzi,, S. Cattarin, N. Comisso, R. Gerbasi, P. Guerriero, M. Musiani, L. Vazquez-Gomez, and E. Verlato: J. Electrochem. Soc., 2015, vol. 162, no. 6, pp. D236-41.10.1149/2.1041506jes ↗
21. 21. F.B.A. Ferreira, F.L.G. Silva, A.S. Luna, D.C.B. Lago, and L.F. Senna: J. Appl. Electrochem., 2007, vol. 37, pp. 473-81.10.1007/s10800-006-9278-9 ↗
22. 22. R. Özdemir and I.H. Karahan: Appl. Surf. Sci., 2014, vol. 318, pp. 314-8.10.1016/j.apsusc.2014.06.188 ↗
23. 23. I. H. Karahan and R. Özdemir: Appl. Surf. Sci., 2014, vol. 318, pp. 100-4.10.1016/j.apsusc.2014.01.119 ↗
24. 24. F.H. Assaf, S.S.A. Elrehim, A.S. Mohamed, and A.M. Zaky: Indian J. Chem. Technol., 1995, vol. 2, pp. 147-52.
25. 25. E. Chaissang, K.V. Quang, and R. Wiart: J. Appl Electrochem., 1986, vol. 16, pp. 591-604.10.1007/BF01006854 ↗
26. 26. V.N. Gusev, A.L. Bezzubov, and E.D. Kochman: Sov. Electrochem, 1977, vol. 13, no. 1, p. 111.
27. F.B.A. Ferreira, P.K.C. Afonso, A.S. Luna et al.: Proceedings of the 2nd Mercosur Congress on Chemical Engineering, Rio de Janeiro, 2005.
28. 28. I.H. Karahan, R. Ozdemir, and B. Erkayman: Appl. Phys. A, 2013, vol. 113, pp. 459-76.10.1007/s00339-013-7544-3 ↗
29. 29. N.C. Kotsakis, P. Raptopoulou, V. Tangoulis, A. Terzis, J. Giapintzakis, T. Jakusch, T. Kiss, and A. Salifoglou: Inorg. Chem., 2003, vol. 42, no. 1, pp. 22-31.10.1021/ic011272l ↗
30. 30. M.R.H. de Almeida, E.P. Barbano, M.F. de Carvalho, I.A. Carlos, J.L.P. Siqueira, and L.L. Barbosa: Surf. Coat. Technol., 2011, vol. 206, pp. 95-102.10.1016/j.surfcoat.2011.06.050 ↗
31. 31. E.G. Vinokurov, K.L. Kandyrin, and V.V. Bondar: Zhurnal Prikladnoi Khimii, 2010, vol. 83, no. 4, pp. 606-10.
32. 32. J. Stevanovic, L.J. Skibina, M. Stefanovic, A. Despic, and V.D. Jovic: J Appl Electrochem, 1992, vol. 22, pp. 172-8.10.1007/BF01023820 ↗
33. 33. C. Rousse, S. Beaufils, and P. Fricoteaux: Electrochim. Acta, 2013, vol. 107, pp. 624-31.10.1016/j.electacta.2013.06.053 ↗
34. 34. S.S. Kulkarni and C.D. Lokhande: Mater. Chem. Phys., 2003, vol. 82, no. 1, pp. 151-6.10.1016/S0254-0584(03)00212-8 ↗
35. K.G. Suresh and K.V.S. Rama Rao: J. Alloys Compd., 1996, vol. 238, no. 1,2, pp. 90–94.10.1016/0925-8388(96)02236-0 ↗
36. 36. D. Grujicic and B. Pesic: Electrochim. Acta, 2002, vol. 47, no. 18, pp. 2901-12.10.1016/S0013-4686(02)00161-5 ↗
37. 37. R. Berry, P. Hall, and M. Harris: Thin Film Tech., Van Nostrand Reinhold Co., Florence, Italy, 1968.
38. 38. Y. Li, H. Jiang, W. Huang, and H. Tian: Appl. Surf. Sci., 2008, vol. 254, no. 21, pp. 6865-9.10.1016/j.apsusc.2008.04.087 ↗
39. 39. I.H. Karahan: J. Mater. Sci., 2007, vol. 42, no. 24, pp. 10160-3.10.1007/s10853-007-2116-6 ↗
40. P.Y. Chen, M.Y. Lin, and I.W Sun: J. Electrochem. Soc., 2000, vol. 147, no. 9, pp. 3350–55.10.1149/1.1393905 ↗
41. 41. M. George, S.S. Nair, A.M. John, P.A. Joy, and M.R. Anantharaman: J. Phys. D: Appl. Phys., 2006, vol. 39, pp. 900-10.10.1088/0022-3727/39/5/002 ↗
42. 42. S. Nasir, M. Anis-ur-Rehman, and M.A. Malik: Phys. Scripta, 2011, vol. 83, p. 25602.10.1088/0031-8949/83/02/025602 ↗
43. 43. M.A. Kumar and S. Muthukumaran: J Mater Sci: Mater Electron, 2013, vol. 24, pp. 4050-9.
44. 44. K.L. Chopra: Thin Film Phenomena, McGraw-Hill, Columbus, OH, 1969.
45. 45. J. Smit and H.P.J. Wijn: Ferrites, Wiley, New York, NY, 1959.
46. 46. M.A. Ashworth, G.D. Wilcox, R.L. Higginson, R.J. Heath, C. Liu, and R.J. Mortimer: Microelectron. Reliab. 2015, vol. 55, pp. 180-91.10.1016/j.microrel.2014.10.005 ↗
47. 47. A. Afshar, A.G Dolati, and M Ghorbani: Mater. Chem. Phys., 2003, vol. 77, no. 2, pp. 352-8.10.1016/S0254-0584(02)00017-2 ↗
48. 48. J. Dolinsek, T. Apih, P. Jeglic, I. Smiljanic, A. Bilušić, Ž. Bihar, A. Smontara, Z. Jagličić, M. Heggen, and M. Feuerbacher: Intermetallics, 2007, vol. 15, pp. 1367-76.10.1016/j.intermet.2007.04.010 ↗
49. 49. D.C. Leitao, C.T. Sousa, J. Ventura, J.S. Amaral, F. Carpinteiro, K.R. Pirota, M. Vazquez, J.B. Sousa, and J.P. Araujo: J. Non-Cryst. Solids, 2008, vol. 354, pp. 5241-3.10.1016/j.jnoncrysol.2008.05.088 ↗
50. 50. V. Chaudhari, S.E. Shirsath, M.L. Mane, R.H. Kadam, S.B. Shelke, and D.R. Mane: J. Alloy. Comp., 2013, vol. 549, pp. 213-220.10.1016/j.jallcom.2012.09.060 ↗
51. 51. A. Gerber, A. Milner, I.Y. Korenblit, M. Karpovsky, A. Gladkikh, and A. Sulpice: Phys. Rev. B, 1998, vol. 57, p. 13667.10.1103/PhysRevB.57.13667 ↗
52. 52. I.H. Karahan, O. Karabulut, and U. Alver: Phys. Scripta, 2009, vol. 79, p. 055801V.10.1088/0031-8949/79/05/055801 ↗
53. 53. D.H. Kim, I.K. Park, W.S. Um, and H.G. Kim: Jpn. J. Appl. Phys., 1995, vol. 34, pp. 4862-9.10.1143/JJAP.34.4862 ↗
54. 54. H. Taslimi, M.H. Sohi, S. Mehrizi, and M. Saremi: J. Mater Sci: Mater Electron, 2015, vol. 26, pp. 2962-8.
55. 55. C.M. Lee, S.M. Hwanga, G.C. Parka, J.C. Kima, J.H. Lima, J. Joo, S.-B. Junga, and Y.S. Kim: Curr. Appl. Phys., 2011, vol. 11, no. 4, pp. S128-31.10.1016/j.cap.2011.07.022 ↗