journal article·2016-12

Determining Individual Phase Flow Properties in a Quench and Partitioning Steel with In Situ High-Energy X-Ray Diffraction and Multiphase Elasto-Plastic Self-Consistent Method

Xiaohua Hu, Kyoo Sil Choi, Xin Sun, Yang Ren, Yangdong Wang

Publisher page

Abstract

The micromechanical properties of the constituent phases were characterized for advanced high-strength steels (AHSS) produced by a quenching and partitioning (Q&P) process with in situ tensile loading under synchrotron-based, high-energy X-ray diffraction. The constituent phases present are retained austenite and three martensites (tempered, untampered, and freshly formed martensites). For the material investigated, the 200 and 220 lattice strains of the retained austenite phase were calculated by examining the changes of the X-ray diffraction peak positions during deformation. The 200 and 211 lattice strains of the various martensitic phases with similar crystal structures were determined by separating their overlapped diffraction peaks. Apart from tempered and untempered martensite, the diffraction peaks of freshly formed martensite as a result of austenite-to-martensite transformation can also be separated due to a high initial austenite volume fraction. The phase stresses are first estimated with an empirical relationship through the X-ray diffraction elastic constants. A multiphase elasto-plastic self-consistent model is next used for more accurate determination of the constitutive behaviors of the various phases by comparing the predicted lattice strain distributions and global stress–strain curves with the measured ones. The determined constitutive laws will be used for microstructure-based modeling for sheet formability of the Q&P AHSS steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. 1. D.J. Lloyd: Scripta Mater., 2003, vol. 48, p. 341.10.1016/S1359-6462(02)00455-4 ↗
2. 2. M.R. Barnett: Mater. Sci. Eng. A, 2007, vol. 464, p. 1.10.1016/j.msea.2006.12.037 ↗
3. 3. N. Jia, Z.H. Cong, X. Sun, S. Cheng, Z.H. Nie, Y. Ren, P.K. Liaw, and Y.D. Wang: Acta Mater., 2009, vol. 57, p. 3965.10.1016/j.actamat.2009.05.002 ↗
4. 4. G. Frommeyer, U. Brux, and P. Neumann: ISIJ Int., 2003, vol. 43, p. 438.10.2355/isijinternational.43.438 ↗
5. 5. E. De Moor, C. Fojer, J. Penning, A.J. Clarke, and J.G. Speer: Phys. Rev. B, 2010, vol. 82, p. 104210.10.1103/PhysRevB.82.104210 ↗
6. 6. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vol. 438, no. 440, p. 25.10.1016/j.msea.2006.02.133 ↗
7. 7. U. F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, vol. 48, p. 171.10.1016/S0079-6425(02)00003-8 ↗
8. 8. E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, p. 747–52.10.1088/0370-1301/64/9/303 ↗
9. 9. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, p. 25.
10. 10. X.H. Hu, P. Van Houtte, M. Liebeherr, A. Walentek, M. Seefeldt, and H. Vandekinderen: Acta Mater., 2006, vol. 54, p. 1029.10.1016/j.actamat.2005.10.030 ↗
11. 11. O. Bouaziz and P. Buessler: Adv. Eng. Mater., 2004, vol. 6, p. 79.10.1002/adem.200300524 ↗
12. 12.J.W. Hutchinson: Proc. Royal Soc. London Series A, 1970, vol. 319, p. 247-72.10.1098/rspa.1970.0177 ↗
13. 13.J.W. Hutchinson (1976) Proc. R. Soc. London Series A-Math. Phys. Sci., 348: 101-27.10.1098/rspa.1976.0027 ↗
14. 14. K.S. Choi, W.N. Liu, X. Sun, and M.A. Khaleel: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2009, vol. 40A, p. 796.10.1007/s11661-009-9792-6 ↗
15. 15. Z. Marciniak, J. Duncan, and S.J. Hu: Mechanics of Sheet Metal Forming, Elsevier, Atlanta, GA, 2002.
16. 16. A.G. Considere: Ann. Ponts. Chausses, 1885, vol. 9, p. 574.
17. 17. X.H. Hu, M. Jain, D.S. Wilkinson, and R.K. Mishra: Acta Mater., 2008, vol. 56, p. 3187.10.1016/j.actamat.2008.02.048 ↗
18. 18. X. Sun, K.S. Choi, W.N. Liu, and M.A. Khaleel: Int. J. Plastic., 2009, vol. 25, p. 1888.10.1016/j.ijplas.2008.12.012 ↗
19. 19. X.H. Hu, D.S. Wilkinson, M. Jain, P.D. Wu, and R.K. Mishra: Mater. Sci. Eng. A, 2011, vol. 528, p. 2002.10.1016/j.msea.2010.11.051 ↗
20. 20. X.H. Hu, M. Jain, P.D. Wu, D.S. Wilkinson, and R.K. Mishra: J. Mater. Process. Tech., 2010, vol. 210, p. 1232.10.1016/j.jmatprotec.2010.03.010 ↗
21. 21. K.S. Choi, W.N. Liu, X. Sun, M.A. Khaleel, Y. Ren, and Y.D. Wang: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2008, vol. 39A, p. 3089.10.1007/s11661-008-9649-4 ↗
22. 22. K.S. Choi, W.N. Liu, X. Sun, and M.A. Khaleel: Acta Mater., 2009, vol. 57, p. 2592.10.1016/j.actamat.2009.02.020 ↗
23. 23. H. Ghassemi-Armaki, P. Chen, S. Bhat, S. Sadagopan, S. Kumar, and A. Bower: Acta Mater., 2013, vol. 61, p. 3640.10.1016/j.actamat.2013.02.051 ↗
24. 24. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Acta Mater., 2001, vol. 49, p. 3899.10.1016/S1359-6454(01)00295-6 ↗
25. 25. J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Acta Mater., 2003, vol. 51, p. 1663.10.1016/S1359-6454(02)00568-2 ↗
26. 26. N. Jia, R. Lin Peng, Y.D. Wang, S. Johansson, and P.K. Liaw: Acta Mater., 2008, vol. 56, p. 782.10.1016/j.actamat.2007.10.040 ↗
27. 27. Z.H. Cong, N. Jia, X. Sun, Y. Ren, J. Almer, and Y.D. Wang: Metall. Mater. Trans. A, 2009, vol. 40, p. 1383.10.1007/s11661-009-9824-2 ↗
28. 28. P. Van Houtte and L. De Buyser: Acta Metall. Mater., 1993, vol. 41, p. 323.10.1016/0956-7151(93)90063-X ↗
29. 29. H. Dolle: J. Appl. Cryst., 1979, vol. 12, p. 489.10.1107/S0021889879013169 ↗
30. 30.W. Voigt: Lehrbuch der Kristallphysik, Teubner-Verlag, Berlin, 1928.
31. 31. A. Reuss: Z. Angew. Math. Mech., 1929, vol. 9, p. 49.10.1002/zamm.19290090104 ↗
32. 32. K.S. Choi, X.H. Hu, X. Sun, M.D. Taylor, E. De Moor, J. Speer, and D.K. Matlock: Sae Technicalpaper Series, 2014, vol. 2014, no. 1, p. 812.
33. 33. X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, and L. Wang: Scripta Mater., 2013, vol. 68, p. 321.10.1016/j.scriptamat.2012.11.003 ↗
34. 34. P. Van Houtte: The MTM-FHM Software System, version 2, Katholieke Universiteit Leuven, Belgium, 2000.
35. 35. W.H. Bragg and W.L. Bragg: Proc. R. Soc. London. Series A, 1913, vol. 88, p. 428.10.1098/rspa.1913.0040 ↗
36. A.P. Hammersley: ESRF International Report No. ESRF98HA01T. Program http://www.esrf.eu/computing/scientific/FIT2D, 2004.
37. Origin, Origin 86: 2015.
38. 39. H. Moller and G. Martin: Mitt. Kaiser Wilhelm Inst. Eisenforsch. Duesseldorf 1939, vol. 21, p. 261.
39. 40. S.A. Kim and W.L. Johnson: Mater. Sci. Eng. A, 2007, vol. 452, no. 453, p. 633.10.1016/j.msea.2006.11.147 ↗
40. 41. P.A. Turner and C.N. Tome: Acta Metall. Mater., 1994, vol. 42, p. 4143.10.1016/0956-7151(94)90191-0 ↗
41. J.J. Coryell, V. Savic, S.K. Mishra, S.M. Tiwari, L.G. Hector, J.R. Bradley, F.E. Pinkerton, K.S. Snavely, and J. Li: GM Internal Report, 2012, vol. 13, p. 191.
42. 43. S. He, A. Van Bael, S.Y. Li, P. Van Houtte, F. Mei, and A. Sarban: Mater. Sci. Eng. A, 2003, vol. 346, p. 101.10.1016/S0921-5093(02)00509-9 ↗
43. J. Tacq, M. Kriška, and M. Seefeldt: Synchrotron Diffraction Study of the Cementite Phase in Cold Drawn Pearlitic Steel Wires, presented at International Conference on Residual Stresses 9 (ICRS 9), 2014.