Evolution of Slip Morphology and Fatigue Crack Initiation in Surface Grains of Ni200
Source abstract
Abstract
The evolution of slipbands into fatigue cracks in surface grains of commercially pure Ni, Ni200 (99.35Ni-0.4Fe-0.25Cu, in wt pct), was studied at ambient temperature. Round-bar specimens with electropolished surfaces were fatigued under displacement-controlled, fully reversed conditions at four strain amplitudes under a nominal strain rate of 1 × 10−3 s−1. Low-cycle fatigue tests were periodically interrupted to characterize the slip morphology at various fatigue cycles using scanning electron microscopy. The results showed that the distribution of slip in Ni200 varied considerably in individual surface grains at a given strain amplitude. Some grains were deformed more severely and exhibited more intense slipbands than others, while some surface grains showed the absence of slip lines with no evidence of plastic deformation. The evolutions of slipband width and spacing in deformed surface grains were followed as a function of fatigue cycles in order to assess the slipband morphology at the onset of fatigue crack initiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic Effects on Materials · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. C. Laird: in Fatigue and Microstructure, M. Meshii, ed., ASM, Metals Park, OH, 1978, pp. 149–203.
2. H. Mughrabi: Fatigue: David L. Davidson Symp., K.S. Chan, P.K. Liaw, R.S. Bellows, T. Zogas, and W.O. Soboyejo, eds., TMS, Warrendale, PA, 2002, pp. 3–15.
3. W.A. Wood: Fatigue in Aircraft Structures, Academic Press, New York, NY, 1956.
4. J. Wareing and H.G. Vaughan: Met. Sci., 1979, vol. 13, pp. 1–8.10.1179/030634579790434150 ↗
5. B.D. Buckner, V. Markov, L. Lai, and J.C. Earthman: Opt. Eng., 2008, vol. 47 (5), p. 054402.10.1117/1.2919793 ↗
6. M.E. Fine and R.O. Ritchie: in Fatigue and Microstructure, M. Meshii, ed., ASM, Metals Park, OH, 1978, pp. 245–78.
7. H. Mughrabi: Rev. Phys. Appl., 1988, vol. 23, pp. 367–79.10.1051/rphysap:01988002304036700 ↗
8. K. Tanaka and T. Mura: ASME J. Appl. Mech., 1981, vol. 48, pp. 97–103.10.1115/1.3157599 ↗
9. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117–23.10.1007/BF02642422 ↗
10. G. Venkataraman, Y.W. Chung, and T. Mura: Acta Metall. Mater., 1991, vol. 39, pp. 2621–29.10.1016/0956-7151(91)90078-F ↗
11. G. Venkataraman, Y.W. Chung, and T. Mura: Acta Metall. Mater., 1991, vol. 39, pp. 2631–38.10.1016/0956-7151(91)90079-G ↗
12. K.S. Chan: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 43–58.10.1007/s11661-003-0207-9 ↗
13. A Saxena and S.D. Antolovich: Metall. Trans. A, 1975, vol. 6A, pp. 1809–28.10.1007/BF02642311 ↗
14. D.J. Morrison and V. Chopa: Mater. Sci. Eng., 1994, vol. A177, pp. 29–42.10.1016/0921-5093(94)90475-8 ↗
15. C. Buque: Int. J. Fatigue, 2001, vol. 23, pp. 459–66.10.1016/S0142-1123(01)00013-5 ↗
16. C. Buque, J. Bretschneider, A. Schwab, and C. Holste: Mater. Sci. Eng., 2001, vol. A300, pp. 254–62.10.1016/S0921-5093(00)01784-6 ↗
17. Y. El-Madhoun, A. Mohamed, and M.N. Bassim: Mater. Sci. Eng., 2004, vol. A386, pp. 140–47.10.1016/j.msea.2004.06.064 ↗
18. C. Depres, C.F. Robertson, and M.C. Fivel: Mater. Sci. Eng., 2004, vols. A387–A389, pp. 288–91.10.1016/j.msea.2003.12.084 ↗
19. S.E. Harvey, P.G. Marsh, and W.W. Gerberich: Acta Metall. Mater., 1994, vol. 42, pp. 3493–3502.10.1016/0956-7151(94)90481-2 ↗
20. J. Man, K. Obrtlik, C. Blochwitz, and J. Polak: Acta Mater., 2002, vol. 50, pp. 3767–80.10.1016/S1359-6454(02)00167-2 ↗
21. J. Polak, J. Man, and K. Obrtlik: Int. J. Fatigue, 2003, vol. 25, pp. 1027–36.10.1016/S0142-1123(03)00114-2 ↗
22. ASTM Standard E606: Strain Controlled Fatigue Testing, ASTM International, Philadelphia, PA, 1999, pp. 543–57.
23. D.L. Davidson and K.S. Chan: Acta Metall., 1989, vol. 37, pp. 1089–97.10.1016/0001-6160(89)90105-3 ↗
24. J. Polak, J. Man, T. Vystavel, and M. Petrenec: Mater. Sci. Eng., A, 2009, vol. A517, pp. 204–11.10.1016/j.msea.2009.03.070 ↗
25. L.F. Coffin, Jr.: Trans. ASME, 1954, vol. 76, pp. 931–50.
26. S.S. Manson and M.H. Hirschberg: Fatigue: An Inter-Disciplinary Approach, Syracuse University Press, Syracuse, NY, 1964, pp. 133–78.