journal article·2014-08

The Role of Precipitates in the Behavior of Young’s Modulus in Aluminum Alloys

Aranzazu Villuendas, Jordi Jorba, Antoni Roca

Publisher page

Abstract

The behavior of Young’s modulus, E, was determined in aluminum alloys such as AA7075 and AA2024 at room temperature under various thermomechanical treatments. E was almost 2 pct (AA7075) and 3 pct (AA2024) lower for these materials after solution heat treatment and quenching than after annealing. When the aging time was increased, values of E tended to approach the annealing values. The variation observed was attributed to structural changes during the thermal treatments. However, when the alloys were cold deformed before or after aging, no appreciable changes in E were observed. This behavior is quite different to that observed in cold-worked pure aluminum (and also in pure iron), in which E decreased to a minimum (7 to 10 pct reduction in values) and then partially recovered with additional cold working. The variation in behavior with cold working observed in a pure material and other materials that contain a second phase with nanometric precipitates was correlated with the density of dislocations and the length of the dislocation segments generated during the cold working process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. D. J. Mack: Trans. AIME, 1946, Vol. 166, pp. 68-85.
2. F. Morestin and M. Boivin: Nuclear Eng. & Design, 1996, Vol. 162, pp. 107-116.10.1016/0029-5493(95)01123-4 ↗
3. H. M. Ledbetter and S.A. Kim: Mat. Sci. Eng. A, 1988, Vol. 101, pp. 87-92.
4. M. Lucena, J.A. Benito, J. Jorba and A. Roca: Rev. Metal. Madrid, 1998, Vol. 34, pp. 310-313.10.3989/revmetalm.1998.v34.iExtra.760 ↗
5. J.A. Benito, J. Calle, A. Roca, and J. Jorba: Proceedings Propiedades Mecánicas de Sólidos, ETSEIB UPC, Barcelona, Spain, 1996, pp. 320–25.
6. J. A. Benito, J. M. Manero, J. Jorba and A. Roca: Metall. Mat. Trans. A, 2005, Vol. 36A, pp. 3317-3324.10.1007/s11661-005-0006-6 ↗
7. K. Yamaguchi, H. Adachi and N. Takakura: Metals and Mat., 1998, Vol. 4 (3), pp. 420-425.10.1007/BF03187802 ↗
8. H.Y. Yu: Mat. Design, 2009, Vol. 30, (3), pp. 846-850.10.1016/j.matdes.2008.05.064 ↗
9. H. Yu, L. Bao, Y. Gao: J. Mech. Eng., 2010, Vol. 46 (18), pp. 46-51.10.3901/JME.2010.18.046 ↗
10. R. Pérez, J.A. Benito, J.M. Prado; ISIJ International, 2005, Vol. 45 (12), pp. 1925-1933.10.2355/isijinternational.45.1925 ↗
11. A. Ghaei and D.E. Green: Computational Materials Science, 2010, Vol. 48, (1), pp. 195-205.10.1016/j.commatsci.2009.12.028 ↗
12. A. Ghaei: Int. J. Mech. Sc., 2012, Vol. 65, (1), pp. 38-47.10.1016/j.ijmecsci.2012.09.002 ↗
13. T. Otomo, H. Matsumoto, N. Nombra and A. Chiba: J. Japan Inst. Met., 2009, Vol. 73, (2), pp. 74-80.10.2320/jinstmet.73.74 ↗
14. M. Tane, T. Nakano, S. Kuramoto, M. Hara, M. Niimoni, N. Takesue, T. Yano and H. Nakajima: Acta Mater., 2011, Vol. 59 (18), pp. 6975-6988.10.1016/j.actamat.2011.07.050 ↗
15. I. Fonseca, J.A. Benito, J. Jorba and A. Roca: Rev. Metal. Madrid, 2002, 38, pp. 249-256.10.3989/revmetalm.2002.v38.i4.407 ↗
16. A. Villuendas, J. Jorba, and A. Roca: Rev. Metal. Madr., 2005, vol. EXTR, pp. 46–52.10.3989/revmetalm.2005.v41.iExtra.997 ↗
17. E.P. Papadakis, C.A. Stickels and R.C. Innes: Journal of Mats. and Manufac., 1995, Vol. 104, pp. 830-837.
18. E. P. Papadakis: J. Applied Phys., 1964, Vol. 35, pp. 1474-1482.10.1063/1.1713652 ↗
19. H.G. Masing, W. Veroff: Siemens-Konzern, 1929, Vol. 8, (1), pp. 142-148.
20. L. Guillet: J. Rev. de Met., 1939, Vol. 36, pp. 497-521.10.1051/metal/193936120497 ↗
21. W. Heyroth and E. Becker: Mat. Sci. Forum, 1987, Vol. 13-14, pp. 383-388.10.4028/www.scientific.net/MSF.13-14.383 ↗
22. A. Villuendas, J. Jorba, and A. Roca: Symp. Propiedades Mecánicas de Sólidos, Universidad Santiago de Compostela, Santiago de Compostela, Spain, 2006, pp. 107–111.
23. A. Villuendas, A. Roca and J. Jorba: Mat. Sci. Forum, 2007, Vols. 539-543, pp. 293-298.10.4028/www.scientific.net/MSF.539-543.293 ↗
24. A. Villuendas: Ph.D. Thesis, Universitat de Barcelona, Barcelona, 2007.
25. J. Krautkrämer and H. Krautkramer: Ultrasonic Testing of Materials, Springer-Verlag, Berlin, 1969.10.1007/978-3-662-13257-9 ↗
26. B. Carlin: Ultrasonics, 2nd ed., Mc. Graw-Hill Publishing Company, Inc, 1960.
27. F. Dupont, C.A. Brown and E.El Batawi: Pract. Met., 1986, Vol. 23, pp. 493-501.10.1515/pm-1986-231004 ↗
28. R. K. Ham: Phil. Mag., 1961, Vol. 6, p. 1183-1184.10.1080/14786436108239679 ↗
29. P. Howard, R. Pilkington, G.W. Lorimer and F.R. Sale: High Temp High Press., 1985, Vol. 17, pp. 123–29.
30. A. Ning, Z. Liu and S. Zeng: Trans. Nonferrous Met. Soc. China, 2006,Vol. 16, pp. 1341-1347.10.1016/S1003-6326(07)60017-X ↗
31. N.F. Mott and F.R.N. Nabarro: Proc. Phys., 1940, vol. 52, p. 86.10.1088/0959-5309/52/1/312 ↗
32. F.R.N. Nabarro: Rept. Conf. on Strength of Solids, University of Bristol, Bristol, 1948, pp. 38–45.
33. F.Yoshida, T. Uemori, and K. Fujiwara: Int. J. Plast., 2002, vol. 18(5–6), pp. 633–59.10.1016/S0749-6419(01)00049-3 ↗
34. D. Kulawinsky, K. Nagel, S. Henkel, P. Hübner, H. Fisher, M. Kuna, and H. Biermann: Eng. Fract. Mech., 2011, vol. 78(8), pp. 1684–95.10.1016/j.engfracmech.2011.02.021 ↗
35. I. Isarn: Master Thesis, Universitat de Barcelona, Barcelona, 2012.
36. J. Jorba, R. Pons, J.A. Benito, and A. Roca: Thermec’2000-Proc. Int. Conf. on Processing and Manufacturing Advanced Materials, CDROM, Las Vegas, NV, Special Issue: J. Mater. Process. Technol., 2001, vol. 117 (3).