Analysis of the Deformation Behavior of Magnesium-Rare Earth Alloys Mg-2 pct Mn-1 pct Rare Earth and Mg-5 pct Y-4 pct Rare Earth by In Situ Energy-Dispersive X-ray Synchrotron Diffraction and Elasto-Plastic Self-Consistent Modeling
Source abstract
Abstract
The deformation behavior of the Mg-RE alloys ME21 and WE54 was investigated. Although both alloys contain rare earth elements, which alter and weaken the texture, the flow curves of the alloys deviate significantly, especially in uniaxial compression test. Apart from the higher strength of the WE54 alloy, the compression flow curve does not exhibit the typical sigmoidal shape, which is associated with tension twinning. However, optical microscopy, X-ray texture measurements, and EBSD analysis reveal the activity of tension twinning. The combination of in situ energy-dispersive X-ray synchrotron diffraction and EPSC modeling was used to analyze these differences. The investigation reveals that twin propagation is decelerated in the WE54 alloy, which requires a change of the twinning scheme from the ‘finite initial fraction’ to the ‘continuity’ assumption. Furthermore, an enhanced activity of the 〈c+a〉 pyramidal slip system was observed in case of the WE54 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. N. Stanford and M.R. Barnett: Scripta Mater., 2008, vol. 58, pp. 179-182.10.1016/j.scriptamat.2007.09.054 ↗
2. N. Stanford and M.R. Barnett: Mater. Sci. Eng. A, 2008, vol. A496, pp. 399-408.10.1016/j.msea.2008.05.045 ↗
3. N. Stanford: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2669-2677.10.1016/j.msea.2009.12.036 ↗
4. K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi and D. Letzig: Scripta Mater., 2010, vol. 63, pp. 725-730.10.1016/j.scriptamat.2009.12.033 ↗
5. E.A. Ball and P.B. Prangnell: Scripta Metall. Mater., 1994, vol. 31, pp. 111-116.10.1016/0956-716X(94)90159-7 ↗
6. P.A. Turner and C.N. Tomé: Acta Metall. Mater., 1994, vol. 42, pp. 4143- 4153.10.1016/0956-7151(94)90191-0 ↗
7. C.N. Tomé, E.C. Oliver and J.A. Wollmershauser: Code Elasto-Plastic Self-Consistent (EPSC), Version 4, MST-8 MS G755, Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM, USA, 2010.
8. O. Muransky, D.G. Carr, M.R. Barnett, E.C. Oliver and P. Sittner: Mater. Sci. Eng. A, 2008, vol. 496, pp. 14-24.10.1016/j.msea.2008.07.031 ↗
9. B. Clausen, C.N. Tomé, D.W. Brown and S.R. Agnew: Acta Mater., 2008, vol. 56, pp. 2456-2468.10.1016/j.actamat.2008.01.057 ↗
10. C.J. Neil, J.A. Wollmershauser, B. Clausen, C.N. Tomé, S.R. Agnew: Int. J. Plast. 2010, vol 26, pp. 1772-1791.10.1016/j.ijplas.2010.03.005 ↗
11. M.D. Abramoff, P.J. Magalhaes and S.J. Ram: Biopho. Inter., 2004, vol. 11, pp. 36-42.
12. H.J. Bunge: Program System ODF-Analysis, Cuvillier, Göttingen, 1993.
13. C. Genzel, I. Denks, J. Gibmeier, M. Klaus and G. Wagener: Nucl. Instrum. Meth. A, 2007, vol. 578, pp. 23-33.10.1016/j.nima.2007.05.209 ↗
14. F. Bachmann, R. Hielscher and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
15. M. Huppmann, S. Gall, S. Müller S and W. Reimers: Mater. Sci. Eng. A, 2010, vol. 528, pp. 342-354.10.1016/j.msea.2010.09.025 ↗
16. X. Li, T. Al-Samman, S. Mu and G. Gottstein: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7915-7925.10.1016/j.msea.2011.07.010 ↗
17. G. Gottstein: Physikalische Grundlagen der Materialkunde, 3rd ed., Springer, Berlin, 2007, p. 242.
18. R. Abbaschian, L. Abbaschian, and R.E. Reed-Hill: Physical Metallurgy Principles, 4th ed., Cengage Learning, Stamford, 2009, p. 144.
19. S.R. Agnew, R.P. Mulay, F.J. Polesak, C.A. Calhoun, J.J. Bhattacharyya and B. Clausen: Acta Mater. 2013, vol. 61, pp. 3769-3780.10.1016/j.actamat.2013.03.010 ↗
20. S.R. Agnew, M.H. Yoo and C.N. Tomé: Acta Mater., 2001, vol. 49, pp. 4277-4289.10.1016/S1359-6454(01)00297-X ↗
21. S. Sandlöbes, M. Friák, S. Zaefferer, A. Dick, S. Yi, D. Letzig, Z. Pei, L.F. Zhu, J. Neugebauer, D. Raabe: Acta Mater., 2012, vol. 60, pp. 3011-3012.10.1016/j.actamat.2012.02.006 ↗
22. S. Sandlöbes M. Friák, J. Neugebauer, D. Raabe: Mater. Sci. Eng. A: 2013, vol. 576, pp. 61-68.10.1016/j.msea.2013.03.006 ↗
23. P. Hidalgo-Manrique, S.B. Yi, J. Bohlen, D. Letzig, and M.T. Pérez-Prado: Metall. Mater. Trans. A. DOI:10.1007/s11661-013-2169-x.10.1007/s11661-013-2169-x ↗
24. N.V. Dudamell, P. Hidalgo-Manrique, A. Chakkedath, Z. Chen, C.J. Boehlert, F. Gálvez, S. Yi, J. Bohlen, D. Letzig, M.T. Pérez-Prado: Mater. Sci. Eng. A, 2013, vol. 583, pp. 220-231.10.1016/j.msea.2013.07.003 ↗
25. Q. Zhang, T.W. Fan, L. Fu, B.Y. Tang, L.M. Peng, W.J. Ding: Intermetallics, 2012, vol. 29, pp. 21-26.10.1016/j.intermet.2012.04.015 ↗
26. N. Stanford, D. Atwell, A. Beer, C. Davies, M.R. Barnett: Scripta Mater., 2008, vol. 59, pp. 772-775.10.1016/j.scriptamat.2008.06.008 ↗
27. M. Lentz, M. Klaus, W. Reimers, B. Clausen: Mater. Sci. Eng. A, 2013, vol. 586, pp. 178-189.10.1016/j.msea.2013.08.020 ↗
28. Y. Chino, M. Kado, and M. Mabuchi: Mater. Sci. Eng. A, 2008, vol. 494, pp. 343–49.10.1016/j.msea.2008.04.059 ↗