Influence of the Tool Shoulder Contact Conditions on the Material Flow During Friction Stir Welding
Source abstract
Abstract
Friction stir welding (FSWing) is a solid-state joining process of special interest in joining alloys that are traditionally difficult to fusion weld. In order to optimize the process, various numeric modeling approaches have been pursued. Of importance to furthering modeling efforts is a better understanding of the contact conditions between the workpiece and the weld tool. Both theoretical and experimental studies indicate the contact conditions between the workpiece and weld tool are unknown, possibly varying during the FSW process. To provide insight into the contact conditions, this study characterizes the material flow in the FSW nugget by embedding a lead (Pb) wire that melted at the FSWing temperature of aluminum alloy 2195. The Pb trace provided evidence of changes in material flow characteristics which were attributed to changes in the contact conditions between the weld tool and workpiece, as driven by temperature, as the tool travels the length of a weld seam.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. W.M. Thomas, E.D. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.9, 1991.
2. A.C. Nunes, Jr.: Proc. Aluminum, TMS International, Materials Park, OH, 2001, pp. 235–48.
3. J.A Schneider, A.C. Nunes, Jr.: Metall. Mater. Trans. B, 2004. vol. 35B, pp. 777-83.10.1007/s11663-004-0018-4 ↗
4. K. Colligan (1999) Weld. J. 78(7), pp. 229-37.
5. T.U. Seidel, A.P. Reynolds: Sci. Technol. Weld. Join., 2003, vol. 8, no. 3, pp. 175-83.10.1179/136217103225010952 ↗
6. M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, A.C. Nunes: Mater. Charact., 2003, vol. 49, pp. 95–101.10.1016/S1044-5803(02)00362-5 ↗
7. Z.W. Chen, T. Pasang, Y. Qi: Mater. Sci. Eng. A, 2008, vol. 474, pp. 312–16.10.1016/j.msea.2007.05.074 ↗
8. A.P. Reynolds: Scripta Mater., 2008, vol. 58, pp. 338–42.10.1016/j.scriptamat.2007.10.048 ↗
9. Y.H. Zhao, S.B. Lin, F.X. Qu, L. Wu: Mater. Sci. Technol., 2006, vol. 22, pp. 45–50.10.1179/174328406X78424 ↗
10. K. Kumar, S.V. Kailas: Mater. Sci. Eng. A, 2008, vol. 485, pp. 367–74.10.1016/j.msea.2007.08.013 ↗
11. B. London, M. Mahoney, W. Bingel, M. Calabrese, R.H. Bossi, and D. Waldron: Friction Stir Welding Processing II, TMS International, Materials Park, OH, 2003, pp. 3–12.
12. F. Gratecap, M. Girard, S. Marya, G. Racineux: Int. J. Mater. Form, 2011, vol. 5, pp. 99-107.10.1007/s12289-010-1008-5 ↗
13. K.N. Krishnan: Mater. Sci. Eng. A, 2002, vol. 327, pp. 246-51.10.1016/S0921-5093(01)01474-5 ↗
14. R.M. Leal, C. Leitãoa, A. Loureiroa, D.M. Rodriguesa, P. Vilac: Mater. Sci. Eng. A, 2008, vol. 498, pp. 384–91.10.1016/j.msea.2008.08.018 ↗
15. P.F. Mendez, K.E. Tello, T.J. Lienert: Acta Mater., 2010, vol. 58, pp. 6012-26.10.1016/j.actamat.2010.07.019 ↗
16. J.A. Schneider, R. Beshears, A.C. Nunes, Jr.: Mater. Sci. Eng. A, 2006, vol. 435-436, pp. 297-304.10.1016/j.msea.2006.07.082 ↗
17. S. Xu, X. Deng: Acta Mater., 2008, vol. 56, pp. 1326–41.10.1016/j.actamat.2007.11.016 ↗
18. H. Zhang, S.B. Lin, L. Wu, J.C. Feng, S.L. Ma: Mater. Des., 2006, vol. 27, pp. 805–09.10.1016/j.matdes.2005.01.016 ↗
19. B. Yang, J. Yan, M.A. Sutton, A.P. Reynolds: Mater. Sci. Eng. A, 2004, vol. 364, pp. 55–65.10.1016/S0921-5093(03)00532-X ↗
20. Z.W. Chen, S. Cui: Scripta Mater., 2008, vol. 58, pp. 417–20.10.1016/j.scriptamat.2007.10.026 ↗
21. A. Scialpi, L.A.C. De Filippis, P. Cavaliere: Mater. Des., 2007, vol. 28, pp. 1124-29.10.1016/j.matdes.2006.01.031 ↗
22. H.N.B. Schmidt, T.L. Dickerson, J.H. Hattel: Acta Mater., 2006, vol. 54, pp. 1199–1209.10.1016/j.actamat.2005.10.052 ↗
23. S. Muthukumaran, S.K. Mukherjee: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 337–40.10.1179/174329306X107665 ↗
24. S. Muthukumaran, S.K. Mukherjee: Int. J. Adv. Manuf. Technol., 2008, vol. 38, pp. 68–73.10.1007/s00170-007-1071-3 ↗
25. J.C. McClure, W. Tang, L.E. Murr, and X. Guo: Proc. 5th Int. Conf. Trends in Welding Res., Pine Mountain, GA, June 1998.
26. Y.J. Chao, X. Qi, W. Tang: Trans. ASME, 2003, vol. 125, pp. 138-45.
27. O. Frigaard, O. Grong, O.T. Midling: Metall. Mater. Trans. A, 2011, vol. 32A, pp. 1189-1200.
28. P.Colegrove, M. Painter, D. Graham, and T. Miller: 2nd Int. Symp. FSWing, TWI, June 2000.
29. P.A. Colegrove, H.R. Shercliff: Sci. Technol. Weld. Join., 2004, vol. 9, no. 6, pp. 483-92.10.1179/136217104225021832 ↗
30. P.A. Colegrove, H.R. Shercliff: J. Mater. Proc. Technol., 2005, vol. 169, pp. 320-27.10.1016/j.jmatprotec.2005.03.015 ↗
31. H. Schmidt, J. Hattel: Model. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 77-93.10.1088/0965-0393/13/1/006 ↗
32. B.C. Liechty, B.W. Webb, Int. J. Mach Tools Manuf., 2008, vol. 48, pp. 1474-85.10.1016/j.ijmachtools.2008.04.005 ↗
33. H. Schmidt, J. Hattel, J. Wert: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 143-57.10.1088/0965-0393/12/1/013 ↗
34. M.Z.H. Khandkar, J.A. Khan, A.P. Reynolds: Sci. Technol. Weld. Join., 2003, vol. 8, no. 3, pp. 165-74.10.1179/136217103225010943 ↗
35. C.M. Chen, R. Kovacevic: Int. J. Mach. Tools. Manuf., 2003, vol. 43, pp. 1319-26.10.1016/S0890-6955(03)00158-5 ↗
36. H. Schmidt, J. Hattel: Scripta Mater., 2008, vol. 58, pp. 332–37.10.1016/j.scriptamat.2007.10.008 ↗
37. J.A. Querin, J.A. Schneider: Weld. J. Supp., 2012, vol. 91, pp. 76s-82s.
38. J. Sanders: MSME Thesis, Mississippi State University, 2005.
39. T.U. Seidel, A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879-84.10.1007/s11661-001-1038-1 ↗
40. H.A. Rubisoff, J.A. Schneider, and A.C. Nunes, Jr.: Friction Stir Welding & Processing-V, TMS International, Materials Park, OH, 2009.
41. J.A. Schneider: Friction Stir Welding & Processing, chap. 3, ASM International, Materials Park, OH, 2007.
42. W.G. Moffet: The Handbook of Binary Phase Diagrams, Genium, New York, 1984.
43. L.E. Murr, Y. Li, R.D. Flores, E.A. Trillo, J.C. McClure (1998) Mater. Res. Innovat., 2, pp. 150–63.10.1007/s100190050078 ↗
44. W.J. Arbegast: Hot Deformation of Al Alloys, TMS Int., Materials Park, OH, 2003.
45. Y. Li, L.E. Murr, J.C. McClure: Scripta Mater., 1999, vol. 40, pp1041-46.10.1016/S1359-6462(99)00062-7 ↗
46. M. Brendel and J.A. Schneider: Proc. 9th Int. FSWing Symp., TWI, May 2012.
47. A.C. Nunes: Friction Stir Welding II, Proceedings MS&T, Columbus, OH, 2006, pp. 107–118.
48. W. Tang, X. Gui, J.C. McClure, L.E. Murr, A.C. Nunes, Jr.: J. Mater. Proc. Manuf. Sci., 1998, vol. 7, no. 2, pp. 163-72.10.1106/55TF-PF2G-JBH2-1Q2B ↗
49. Y. Sato, M. Urata, H. Kokawa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 625-35.10.1007/s11661-002-0124-3 ↗
50. L.E. Murr, G. Liu, J.C. McClure: J. Mater. Sci., 1998, vol. 33, pp. 1243-51.10.1023/A:1004385928163 ↗
51. T.W. Nelson, R.J. Steel, W.J. Arbegast: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 283-88.10.1179/136217103225011005 ↗