journal article·2012-12Open access

Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification

Niels Skat Tiedje, John A. Taylor, Mark A. Easton

Abstract

Unmodified, Na-modified, and Sr-modified castings of Al-7 pct Si and Al-12.5 pct Si alloys were cast in molds in which it was possible to create different cooling conditions. It is shown how solidification influences the distribution of porosity at the surface and the center of the castings as a function of modification and Si content in sand- and chill-cast samples. Eutectic modification, Si content, and cooling conditions have a great impact on the distribution of porosity. Unmodified and Na-modified castings are more easily fed with porosity tending to congregate near the centerline of the casting, while Sr-modified castings solidify in a mushy manner that creates a more homogeneous distribution of porosity in the casting. The amount of porosity was highest in the Sr-modified alloys, lower in the Na-modified alloys, and lowest in the unmodified alloys. The size of the porosity-free layer and the effectiveness of the feeders were greater in the castings made with the steel chills due to the increased thermal gradients and consequent increase in the directionality of solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. J. Campbell: Castings, 2nd ed., Butterworth Heinemann, Oxford, U.K., 2003.
2. H. Fredriksson and U. Åkerlind: Materials Processing During Casting, Wiley, Chichester, U.K., 2006.10.1002/9780470017920 ↗
3. A.K. Dahle, P.A. Tøndel, C.J. Paradies, and L. Arnberg: Metall. Mater. Trans. A, 1996, vol. 27A, no. 8, pp. 2305–13.10.1007/BF02651885 ↗
4. Q.T. Fang and D.A. Granger: AFS Trans., 1989, vol. 97, pp. 989–1000.
5. M.A. Easton and D.H. St. John: Int. J. Cast Met. Res., 2000, vol. 12, no. 6, p. 393.10.1080/13640461.2000.11819377 ↗
6. S.D. McDonald, A.K. Dahle, J.A. Taylor, and D.H. St. John: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1829–37.10.1007/s11661-004-0091-y ↗
7. M.O. Otte, W. Schneider, D.H. St. John, and J.A. Taylor: Giess. Forschung, 2001, vol. 53, no. 1, pp. 1–14.
8. A.K. Dahle, K. Nogita, S.D. McDonald, C. Dinnis, and L. Lu: Mater. Sci. Eng. A, 2005, vols. 413-4, pp. 243–48.10.1016/j.msea.2005.09.055 ↗
9. D. Argo and J. Gruzleski: AFS Trans., 1988, vol. 94, pp. 65–74.
10. H. Fredriksson and U. Åkerlind: Materials Processing During Casting, Wiley, Chichester, U.K., 2006.10.1002/9780470017920 ↗
11. A.K.P. Rao, K. Das, B.S. Murty, and M. Chakraborty: Mater. Lett., 2008, vol. 62, nos. 12-13, pp. 2013–16.10.1016/j.matlet.2007.11.005 ↗
12. M.O. Otte, W. Schneider, D.H. St. John, and J.A. Taylor: Giess. Forschung, 2004, vol. 53, no. 1, pp. 1–14.
13. Y.H. Cho, H.C. Lee, K.H. Oh, and A.K. Dahle: Metall. Mater. Trans. A, 2008, vol. 39A, no. 10, pp. 2435–48.10.1007/s11661-008-9580-8 ↗
14. M. Zarif, B. Mckay, and P. Schumacher: Metall. Mater. Trans. A, 2011, vol. 42, no. 6, pp. 1684–91.10.1007/s11661-010-0553-3 ↗
15. R.H. Mathiesen, L. Arnberg, Y. Li, V. Meier, P.L. Schaffer, I. Snigireva, A. Snigirev, and A.K. Dahle: Metall. Mater. Trans. A, 2011, vol. 42, no. 1, pp. 170–80.10.1007/s11661-010-0443-8 ↗
16. S.D. McDonald, K. Nogita, and A.K. Dahle: J. Alloys Compd., 2006, vol. 422, nos. 1-2, pp. 184–91.10.1016/j.jallcom.2005.11.070 ↗
17. C.M. Dinnis, M.O. Otte, A.K. Dahle, and J.A. Taylor: Metall. Trans. A, 2004, vol. 35A, pp. 3531–41.10.1007/s11661-004-0190-9 ↗
18. J. Campbell: Castings Practice, Elsevier Butterworth-Heinemann, Burlington, MA, 2004.
19. W.S. Pellini: American Foundryman, 1953, vol. 24, no. 6, pp. 62–71.
20. J.R. Davis (Ed.) Machining of Aluminium and Aluminium Alloys, ASM International, Materials Park, OH, 1989, pp. 761–804.10.31399/asm.hb.v16.a0002184 ↗
21. A.K. Dahle, J.A. Taylor, and D.A. Graham: Alum. Trans., 2000, vol. 3, no. 1, pp. 17–30.
22. C.M. Dinnis, A.K. Dahle, and J.A. Taylor: Mater. Sci. Eng. A, 2005, vol. 392, nos. 1-2, pp. 440–48.10.1016/j.msea.2004.10.037 ↗
23. D. Emadi and J. Gruzleski: AFS Trans., 1994, vol. 102, pp. 307–12.
24. J. Kim, H. Kwon, D. Kim, and C.R. Loper Jr.: AFS Trans., 1997, vol. 105, pp. 825–31.
25. M.D. Hanna, S.Z. Lu, and A. Hellawell: Metall. Trans. A, 1984, vol. 15, no. 3, pp. 459–69.10.1007/BF02644969 ↗
26. G.K. Sigworth and C. Wang: Metall. Trans. B, 1993, vol. 24, no. 2, pp. 349–64.10.1007/BF02659138 ↗