Flux Entrapment and Titanium Nitride Defects in Electroslag Remelting of INCOLOY Alloys 800 and 825
Source abstract
Abstract
Electroslag remelted (ESR) ingots of INCOLOY alloys 800 and 825 are particularly prone to macroscale slag inclusions and microscale cleanliness issues. Formation of these structures near the ingot surface can cause significant production yield losses (~10 pct) due to the necessity of extensive surface grinding. Slag inclusions from near the outer radius of the toe end of alloy 800 and 825 ingots were found to be approximately 1 to 3 mm in size and have a multiphase microstructure consisting of CaF2, CaTiO3, MgAl2O4, MgO, and some combination of Ca12Al14O32F2 and/or Ca12Al14O33. These inclusions were often surrounded by fields of 1- to 10-μm cuboidal TiN particles. A large number of TiN cuboids were observed in the ESR electrode with similar size and morphology to those observed surrounding slag inclusions in the ESR ingots, suggesting that the TiN particles are relics from the ESR electrode production process. Samples taken sequentially throughout the AOD processes showed that the TiN cuboidals that are found in ESR ingots form between tapping the AOD vessel into the AOD ladle and the casting of ESR electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. M. Fraser and A. Mitchell: Ironmaking and Steelmaking, 1976, Vol 3 (5), pp. 281-301.
2. G. Hoyle: Electroslag Processes: Principles and Practice, Applied Science Publishers, New York, 1983.
3. H. Holzgruber and W. Holzgruber: Proceedings of the 2003 International Symposium on Liquid Metal Processing and Casting, 2003, pp. 121–29.
4. H. Klein, B. Rosof, C. Jeanfils, and J. Chen: Metallurgical Treatises: USA-China Bilateral Conference, 1981, pp. 239–59.
5. K. C. Mills and B. J. Keene: Int. Met. Rev., 1981, vol. 1, pp. 21-69.10.1179/095066081790149212 ↗
6. S. Cockcroft, T. Degawa, A. Mitchell, D. Tripp, and A. Schmalz: Superalloys, 1992, pp. 577–86.10.7449/1992/Superalloys_1992_577_586 ↗
7. S. Michelic, R. Tanzer, W. Schutzenhofer, and C. Bernhard: Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting, 2011, pp. 81–88.
8. A. Kharicha, A. Ludwig, and M. Wu: Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting, 2011, pp. 41–48.
9. L. Lutterotti: Nuclear Inst. Methods Phys. Res. B, 2010, vol. 268, pp. 334-40.10.1016/j.nimb.2009.09.053 ↗
10. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65-71.10.1107/S0021889869006558 ↗
11. W. Rasband: ImageJ, U. S. National Institutes of Health, www.imagej.nih.gov/ij, Accessed 31 May 2012.
12. U. Costa, and P. Ballirano: Powder Diffr., 2000, vol. 15, pp. 56-61.10.1017/S0885715600010848 ↗
13. R. Nafziger, High Temp. Sci., 1973, vol. 5(6), pp. 414-22.
14. R. Abdulrahman and A. Hendry: Metall. Mater. Trans. B, 2001, vol. 32B, pp.1103-12.10.1007/s11663-001-0098-3 ↗
15. C. Kowanda and M. Speidel: Scripta Materialia, 2003, vol. 48, pp. 1073-78.10.1016/S1359-6462(02)00628-0 ↗