journal article·2007-04

A Microstructure Evolution Model for Hot Rolling of a Mo-TRIP Steel

Dongsheng Liu, F. Fazeli, M. Militzer, W.J. Poole

Publisher page

Abstract

A comprehensive study of microstructure evolution for a Mo-TRIP (transformation-induced-plasticity) steel under hot strip rolling conditions has been conducted. This investigation includes austenite grain growth during reheating, deformation behavior, and static recrystallization kinetics of austenite as well as the effect of cooling rate and austenite conditioning on the continuous cooling transformation (CCT) behavior. The physically based Kocks–Mecking model has been employed to describe the deformation behavior of austenite, while the Johnson–Mehl–Avrami–Kolmogorov (JMAK) approach has been used to predict static recrystallization, and an empirical equation has been formulated for the recrystallized austenite grain size. Ferrite transformation start is described by a model considering early growth of corner nucleated ferrite. The fraction of ferrite transformed from austenite during continuous cooling is predicted by the semiempirical JMAK approach in combination with Scheil’s equation of additivity. The effect of carbon enrichment on ferrite transformation kinetics is explicitly included in the model. In addition, a phenomenological model for the bainite formation has been proposed. Martensite transformation start is described by an empirical equation taking into account carbon enrichment of remaining austenite. Finally, the entire hot strip rolling and controlled cooling process have been simulated by hot torsion tests, and the optimum coiling temperatures for the formation of TRIP microstructures have been determined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. R.A. Heimbuch: 40th Mechanical Working and Steel Processing Conf. Proc., ISS, Warrendale, PA, 1998, vol. XXXVI, pp. 3–10
2. J. Shaw, B. Engl, C. Espina, E.C. Oren, and Y. Kawamoto: New Steel Sheets and Steel Bar Products and Processing, SAE-SP 1685, D.W. Anderson et al., eds., SAE, Warrendale, PA, 2002, pp. 63–71
3. K. Eberle, P. Cantinieaux, P. Harlet: Ironmaking Steelmaking, 1999, vol. 26, pp. 176–8110.1179/030192399677031 ↗
4. I.B. Timokhina, P.D. Hodgson, E.V. Pereloma: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1599–160910.1007/s11661-003-0305-8 ↗
5. H.-B. Ryu, J.G. Speer, J.P. Wise: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2811–1610.1007/s11661-002-0266-3 ↗
6. Z. Li, D. Wu: ISIJ Int., 2006, vol. 46, pp. 121–2810.2355/isijinternational.46.121 ↗
7. D. Wu, Z. Li: ISIJ Int., 2006, vol. 46, pp. 1059–6610.2355/isijinternational.46.1059 ↗
8. P. Jacques, X. Cornet, Ph. Harlet, J. Ladriére, F. Delannay: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–9310.1007/s11661-998-0114-1 ↗
9. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–30310.1016/j.cossms.2004.10.002 ↗
10. J. Huang, W.J. Poole, M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3363–7510.1007/s11661-004-0173-x ↗
11. I.B. Timokhina, P.D. Hodgson, E.V. Pereloma: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2331–4110.1007/s11661-006-0213-9 ↗
12. S. van der Zwaag, L. Zhao, S.O. Kruijver, J. Sietsma: ISIJ Int., 2002, vol. 42, pp. 1565–7010.2355/isijinternational.42.1565 ↗
13. M.R. Berrahmoune, S. Berveiller, K. Inal, A. Moulin, E. Patoor: Mater. Sci. Eng. A, 2004, vol. 378, pp. 304–0710.1016/j.msea.2003.10.372 ↗
14. M. De Meyer, D. Vanderschueren, B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–2210.2355/isijinternational.39.813 ↗
15. J. Maki, J. Mahieu, B.C. De Cooman, S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80
16. P.J. Jacques, E. Girault, P. Harlet, F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061–6710.2355/isijinternational.41.1061 ↗
17. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. van Humbeeck, F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–7410.2355/isijinternational.41.1068 ↗
18. C.M. Sellars, J.A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187–9410.1016/0036-9748(79)90290-4 ↗
19. C.M. Sellars: Sheffield Int. Conf. on Working and Forming Processes, C.M. Sellars and G.J. Davies, eds., The Metals Society, London, 1980, pp. 3–15
20. M. Suehiro, K. Sato, Y. Tsukano, H. Yada, T. Senuma, Y. Matsumura: Trans. ISIJ, vol. 27, 1987, pp. 439–4510.2355/isijinternational1966.27.439 ↗
21. J.H. Beynon, C.M. Sellars: ISIJ Int., 1992, vol. 32, pp. 359–6710.2355/isijinternational.32.359 ↗
22. O. Kwon, K.J. Lee, J.K. Lee, K.B. Kang, J.K. Kim, J.D. Lee, and J. Kim: HSLA Steels’95, G. Liu, H. Stuart, H. Zhang, and C. Li, eds., China Science & Technology Press, Beijing, 1995, pp. 82–89
23. J. Andorfer, D. Auzinger, B. Buchmayr, W. Giselbrecht, G. Hribernig, G. Hubmer, A. Luger, and A. Samoilov: Thermec '97, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 2069–75
24. I.V. Samarasekera, D.Q. Jin, and J.K. Brimacombe: 38th Mechanical Working Steel Processing Conf. Proc., ISS, Warrendale, PA, 1997, vol. XXXIV, pp. 313–27
25. A.J. Trowsdale, K. Randerson, P.F. Morris, Z. Husain, D.N. Crowther: Ironmaking Steelmaking, 2001, vol. 28, pp.170–7410.1179/030192301677911 ↗
26. Y. Saito: Mater. Sci. Eng A., 1997, vol. 223, pp. 134–4510.1016/S0921-5093(96)10490-1 ↗
27. A. Perlade, D. Grandemange, T. Iung: Ironmaking Steelmaking, 2005, vol. 32, pp. 299–30210.1179/174328105X45893 ↗
28. Y.J. Lan, D.Z. Li, X.C. Sha, Y.Y. Li: Steel Res. Int., 2004, vol. 75, pp. 462–6710.1002/srin.200405797 ↗
29. P.D. Hodgson, R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 1329–3810.2355/isijinternational.32.1329 ↗
30. B. Buchmayr, A. Samoilov, L. Lachmann, G. Aigmuller: Proc. 1st Int. Conf. on Modelling of Metal Rolling Process, The Institute of Materials, London, 1993, pp. 134–48
31. M. Pietrzyk: Mater. Proc. Technol., 2002, vols. 125–126, pp. 53–6210.1016/S0924-0136(02)00285-6 ↗
32. M. Militzer, E.B. Hawbolt, T.R. Meadowcroft: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1247–5910.1007/s11661-000-0120-4 ↗
33. D. Liu, M. Militzer, and W.J. Poole, Materi. Sci. Forum, 2007, THERMEC, 2006, vol. 539–543, pp. 4391–9610.4028/www.scientific.net/MSF.539-543.4391 ↗
34. A. Samoilov, Y. Titovets, N. Zolotorevskii, G. Hribernig, and P. Stiaszny: Proc. 2nd Int. Conf. Processing Materials for Properties, B. Mishra and C. Yamauchi, eds., TMS, Warrendale, PA, 2000, pp. 639–43
35. F. Fazeli, M. Militzer: Steel Res., 2002, vol. 73, pp. 242–4810.1002/srin.200200203 ↗
36. F. Fazeli and M. Militzer: in Solid-Solid Phase Transformations in Inorganic Materials 2005, J.M. Howe, E.D. Laughlin, J.K. Lee, D.J. Srolovitz, and U. Dahmen, eds., TMS, Warrendale, PA, 2005, pp. 835–41
37. H.N. Han, S.-H. Park: Mater. Sci. Technol., 2001, vol. 17, pp. 721–2610.1179/026708301101510447 ↗
38. ASTM Standard Designation E112–88, 1994 Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1994, vol. 3.01, pp. 227–51
39. A. Giumelli, M. Militzer, E.B. Hawbolt: ISIJ Int., 1999, vol. 39, pp. 271–8010.2355/isijinternational.39.271 ↗
40. H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2. pp. 65–7110.1107/S0021889869006558 ↗
41. M. De Meyer, D. Vanderschueren, K. De Blauwe, B.C. De Cooman: 41st Mechanical Working and Steel Processing Conf. Proc., 1999, vol. XXXVII, ISS, Warrendale, PA, pp. 483–91
42. J. Huang: Ph.D. Thesis, the University of British Columbia, Vancouver, BC, 2004
43. E. Emadoddin, A. Akbarzadeh, D. Daneshi: Mater. Charact., 2006, vol. 57, pp. 408–1310.1016/j.matchar.2006.04.006 ↗
44. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
45. M. Militzer, A. Giumelli, E.B. Hawbolt, T.R. Meadowcroft: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3399–3409.10.1007/BF02595433 ↗
46. S. Jiao, J. Penning, F. Leysen, Y. Houbaert, E. Aernoudt: Steel Res., 2000, vol. 71, pp. 345–5010.1002/srin.200001327 ↗
47. U.F. Kocks, H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–27310.1016/S0079-6425(02)00003-8 ↗
48. H.J. Frost, M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982
49. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag: Scripta Metall., 1993, vol. 29, pp. 1011–1610.1016/0956-716X(93)90169-S ↗
50. S.R. Chen and U.K, Kocks: in High Temperature Constitutive Modeling—Theory and Application, A.D. Freed and K.P. Walker, eds., ASME, New York, 1991, pp. 1–12
51. O. Kwon, A.J. DeArdo: Acta Metall. Mater, 1990, vol. 38, pp. 41–5410.1016/0956-7151(90)90133-2 ↗
52. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–2410.1063/1.1750631 ↗
53. M. Umemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanba, N. Nakajima, G. Anan, Y. Higo: ISIJ Int., 1992, vol. 32, pp. 306–1510.2355/isijinternational.32.306 ↗
54. J. Ågren: Scripta Metall. 1986, vol. 20, pp. 1507–1010.1016/0036-9748(86)90384-4 ↗
55. S. Lacroix, Y. Brechet, M. Veron, D. Quidort, M. Kandel, and T. Iung: in Austenite Formation and Decomposition, E.B. Damm and M.J. Merwin, eds., TMS, Warrendale, PA, 2003, pp. 367–79
56. M. Lusk, H.J. Jou: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 287–91.10.1007/s11661-997-0131-5 ↗
57. M. Suehiro, K. Sato, Y. Tsukano, H. Yada, T. Senuma, Y. Matsumura: Trans. ISIJ, 1987, vol. 27, pp. 439–4510.2355/isijinternational1966.27.439 ↗
58. G. Krauss: Steels: Heat Treatment and Processing of Steels Principles, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 43–87
59. D. Hall and J. Worobec: in Phase Transformations during the Thermal/Mechnaical Processing of Steel, E.B. Hawbolt and S. Yue, eds., TMS-CIM, Montreal, 1995, pp. 305–16
60. P. Choquet, A. LeBon, and Ch. Pedrix: 17th Int. Conf. on Strength of Metals and Alloys (ICSMA 7), H.J. McQueen et al., eds., 1985, vol. 2, Pergamon Press, Oxford, UK, pp. 1025–30