Effects of Specimen Thickness and Notch Shape on Fracture Modes in the Drop Weight Tear Test of API X70 and X80 Linepipe Steels
Source abstract
Abstract
This study is concerned with effects of specimen thickness and notch shape on drop weight tear test (DWTT) properties and fracture modes of API X70 and API X80 low-carbon microalloyed linepipe steels. Detailed fractographic analysis of broken DWTT specimens showed that the fracture initiated in an initial cleavage mode near the specimen notch and that some delaminations occurred at the center of the fracture surface. The chevron notch (CN) DWTT specimens had broader initial cleavage areas than the pressed notch (PN) DWTT specimens. The larger inverse fracture areas (i.e., cleavage areas close the hammer impact side) appeared in the PN DWTT specimens, because their higher fracture initiation energy at the notch allowed a higher strain hardening in the hammer-impacted region. The number and length of delaminations were larger in the CN DWTT specimens than in the PN DWTT specimens, and increased with increasing specimen thickness due to the plane strain condition effect. As the test temperature decreased, the tendency of delaminations increased, but delaminations were not found when the cleavage fracture prevailed at very low temperatures. The DWTT test results such as upper shelf energy (USE) and energy transition temperature (ETT) were discussed with relation to microstructures and fracture modes including initial cleavage fracture, ductile fracture, inverse fracture, and delaminations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. J.Y. Koo, M.J. Luton, N.V. Bangaru, R.A. Petkovic, D.P. Fairchild, C.W. Petersen, H. Asahi, T. Hara, Y. Terada, M. Sugiyama, H. Tamehiro, Y. Komizo, S. Okaguchi, M. Hamada, A. Yamamoto, and I. Takeuchi: Proc. 13th Int. Offshore and Polar Engineering Conf., Honolulu, HI, 2003, pp. 10–18.
2. R. Deny: Pipeline Technology, Elsevier, Amsterdam, Netherlands, 2000, vol. I, pp. 1–116.
3. D.P. Fairchild, M.L. Macia, S.D. Papka, C.W. Petersen, J.H. Stevens, S.T. Barbas, N.V. Bangaru, J.Y. Koo, and M.J. Luton: Proc. Int. Pipe Dreamer’s Conf., Scientific Surveys, Ltd., Yokohama, Japan, 2002, pp. 307–21.
4. K.T. Corbett, R.R. Bowen, and C.W. Petersen: Int. J. Offshore Polar Eng., 2004, vol. 14, pp. 75–80.
5. G. Mannucci and D. Harris: Fracture Properties of API X100 Gas Pipeline Steels, Final Report, European Commission, 2002, pp. 1–128.
6. P.E. O’Donoghue, M.F. Kanninen, C.P. Leung, G. Demofonti, and S. Venzi: Int. J. Pres. Ves. Pip., 1997, vol. 70, pp. 11–25.10.1016/S0308-0161(96)00012-9 ↗
7. B.-W. Choi, D.-H. Seo, and J.-I. Jang: Met. Mater. Int., 2009, vol. 15, pp. 373–78.10.1007/s12540-009-0373-4 ↗
8. API Recommended Practice 5L3, American Petroleum Institute, Washington, DC, 1996.
9. Standard Test Methods for Drop-Weight Tear Tests of Ferritic Steels, ASTM Standard E436-03, ASTM, Philadelphia, PA, 2008.
10. D.J. Horsley: Eng. Fract. Mech., 2003, vol. 70, pp. 547–52.10.1016/S0013-7944(02)00136-4 ↗
11. G.M. Wilkowski, W.A. Maxey, and R.J. Eiber: Can. Metall. Q., 1980, vol. 19, pp. 59–77.10.1179/cmq.1980.19.1.59 ↗
12. N. Nozaki, K. Bessyo, Y. Sumitomo, I. Takeuchi, and A. Yamashita: Sumitomo Search, 1981, vol. 26, pp. 76–90.
13. S.Y. Shin, B. Hwang, S. Lee, and K.B. Kang: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 537–51.10.1007/s11661-006-9073-6 ↗
14. W. Oldfield: ASTM Standardization News, 1975, Nov., pp. 24–29.10.1088/0031-9112/26/1/044 ↗
15. M. Diaz-Fuentes, A. Iza-Mendia, and I. Gutierrez: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2505–16.10.1007/s11661-003-0010-7 ↗
16. T. Araki: Atlas for Bainitic Microstructures, ISIJ, Tokyo, 1992, pp. 1–100.
17. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
18. J.-Y. Son, J.-H. Kim, W.-B. Kim, and B.-J. Ye: Met. Mater. Int., 2010, vol. 16, pp. 357–61.10.1007/s12540-010-0603-9 ↗
19. J.F. Knott: Fundamentals of Fracture Mechanics, John Wiley & Sons, New York, NY, 1973, pp. 114–49.
20. B. Hwang, S. Lee, Y.M. Kim, S. Lee, N.J. Kim, J.Y. Yoo, and C.S. Woo: Mater. Sci. Eng., 2004, vol. A368, pp. 18–27.10.1016/j.msea.2003.09.075 ↗
21. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth and Co., Ltd., London, 1988, pp. 80–100.10.1016/B978-0-408-11034-1.50007-6 ↗
22. D.B. Park, J.W. Lee, Y.S. Lee, K.T. Park, and W.J. Nam: Met. Mater. Int., 2009, vol. 15, pp. 197–202.10.1007/s12540-009-0197-2 ↗
23. S.Y. Shin, S. Hong, J. Bae, K. Kim, and S. Lee: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2333–49.10.1007/s11661-009-9943-9 ↗
24. G. Baldi and G. Buzzichell: Met. Sci., 1978, vol. 12, pp. 459–72.10.1179/030634578790433332 ↗