journal article·2022-01

A High-Throughput Method to Define Additive Manufacturing Process Parameters: Application to Haynes 282

Zahabul Islam, Ankur Kumar Agrawal, Behzad Rankouhi, Collin Magnin, Mark H. Anderson, Frank E. Pfefferkorn, Dan J. Thoma

Publisher page

Abstract

This paper demonstrates how an analytical and experimental method can be used to rapidly define the additive manufacturing settings for a new alloy where the process parameters were previously unknown. A nickel-based superalloy, Haynes 282, was chosen for the analysis. An experimental matrix of focused processing parameters was predicted with a dimensionless number and 100 samples were printed using the Laser Powder Bed Fusion technique. High-throughput measurements validated the predicted process conditions needed to achieve desired density and hardness. The whole process was completed in 16 hours. The new technique was confirmed with analytical processing maps adopted by the metal additive manufacturing community. With the predicted set of process parameters, a low-throughput analyses of conventional microstructural characterizations and tensile testing were used to test the predictions. The resultant as-fabricated microstructures have refined length scales of both microsegregation and secondary phase distributions. The mechanical properties were comparable within the predicted processing window and exhibited high strength and high ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. D. Zhang, S. Sun, D. Qiu, M.A. Gibson, M.S. Dargusch, M. Brandt, M. Qian, and M. Easton: Adv. Eng. Mater., 2018, vol. 20(5), p. 1700952.10.1002/adem.201700952 ↗
2. W.E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23(6), pp. 1917–28.10.1007/s11665-014-0958-z ↗
3. T.M. Pollock, A.J. Clarke, and S.S. Babu: Metall. Mater. Trans. A., 2020, vol. 51A(12), pp. 6000–19.10.1007/s11661-020-06009-3 ↗
4. S.S. Babu, N. Raghavan, J. Raplee, S.J. Foster, C. Frederick, M. Haines, R. Dinwiddie, M.K. Kirka, A. Plotkowski, Y. Lee, and R.R. Dehoff: Metall. Mater. Trans. A., 2018, vol. 49A(9), pp. 3764–80.10.1007/s11661-018-4702-4 ↗
5. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
6. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann: Acta Mater., 2016, vol. 117, pp. 371–92.10.1016/j.actamat.2016.07.019 ↗
7. D. Bourell, J.P. Kruth, M. Leu, G. Levy, D. Rosen, A.M. Beese, and A. Clare: CIRP Ann., 2017, vol. 66(2), pp. 659–81.10.1016/j.cirp.2017.05.009 ↗
8. L. Thijs, M.L. Montero Sistiaga, R. Wauthle, Q. Xie, J.-P. Kruth, and J. Van Humbeeck: Acta Mater., 2013, vol. 61(12), pp. 4657–68.10.1016/j.actamat.2013.04.036 ↗
9. P. Mercelis and J.P. Kruth: Rapid Prototyp. J., 2006, vol. 12(5), pp. 254–65.10.1108/13552540610707013 ↗
10. K.M. Bertsch, G. Meric de Bellefon, B. Kuehl, and D.J. Thoma: Acta Mater., 2020, vol. 199, pp. 19–33.10.1016/j.actamat.2020.07.063 ↗
11. K. Tomasz, C. Edward, K. Bogumiła, and R. Jacek: in Proc.SPIE, 2012.
12. J.L. Tan, C. Tang, and C.H. Wong: Metall. Mater. Trans. A., 2018, vol. 49A(8), pp. 3663–73.10.1007/s11661-018-4697-x ↗
13. S.-K. Rittinghaus and J. Zielinski: Metall. Mater. Trans. A., 2021, vol. 52A(3), pp. 1106–16.10.1007/s11661-021-06139-2 ↗
14. A. Caggiano, J. Zhang, V. Alfieri, F. Caiazzo, R. Gao, and R. Teti: CIRP Ann., 2019, vol. 68(1), pp. 451–4.10.1016/j.cirp.2019.03.021 ↗
15. A.K. Agrawal, G. Meric de Bellefon, and D. Thoma: Mater. Sci. Eng. A., 2020, vol. 793, p. 139841.10.1016/j.msea.2020.139841 ↗
16. Yadroitsev, I.: LAP LAMBERT Academic Publishing.
17. A.I. Saville, S.C. Vogel, A. Creuziger, J.T. Benzing, A.L. Pilchak, P. Nandwana, J. Klemm-Toole, K.D. Clarke, S.L. Semiatin, and A.J. Clarke: Addit. Manuf., 2021, vol. 46, p. 102118.
18. S.-H. Sun, K. Hagihara, and T. Nakano: Mater. Des., 2018, vol. 140, pp. 307–16.10.1016/j.matdes.2017.11.060 ↗
19. F. Geiger, K. Kunze, and T. Etter: Mater. Sci. Eng. A., 2016, vol. 661, pp. 240–6.10.1016/j.msea.2016.03.036 ↗
20. C.Y. Liu, J.D. Tong, M.G. Jiang, Z.W. Chen, G. Xu, H.B. Liao, P. Wang, X.Y. Wang, M. Xu, and C.S. Lao: Mater. Sci. Eng. A., 2019, vol. 766, p. 138364.10.1016/j.msea.2019.138364 ↗
21. A. Kudzal, B. McWilliams, C. Hofmeister, F. Kellogg, J. Yu, J. Taggart-Scarff, and J. Liang: Mater. Des., 2017, vol. 133, pp. 205–15.10.1016/j.matdes.2017.07.047 ↗
22. X. Zhao, S. Dong, S. Yan, X. Liu, Y. Liu, D. Xia, Y. Lv, P. He, B. Xu, and H. Han: Mater. Sci. Eng. A., 2020, vol. 771, p. 138557.10.1016/j.msea.2019.138557 ↗
23. B. Rankouhi, D.J. Thoma, and K. Suresh, Manufacturing in the Era of 4th Industrial Revolution, World Scientific, 2020, pp. 9–40.10.1142/9789811222825_0002 ↗
24. L. Cheng, X. Liang, J. Bai, Q. Chen, J. Lemon, and A. To: Addit. Manuf., 2019, vol. 27, pp. 290–304.
25. A. Bandyopadhyay and K.D. Traxel: Addit. Manuf., 2018, vol. 22, pp. 758–74.
26. K.H. Leitz, P. Singer, A. Plankensteiner, B. Tabernig, H. Kestler, and L.S. Sigl: Met. Powder Rep., 2017, vol. 72(5), pp. 331–8.10.1016/j.mprp.2016.04.004 ↗
27. B. Rankouhi, A.K. Agrawal, F.E. Pfefferkorn, and D.J. Thoma: Manuf. Lett., 2021, vol. 27, pp. 13–7.10.1016/j.mfglet.2020.12.002 ↗
28. N.K. Terrett, M. Gardner, D.W. Gordon, R.J. Kobylecki, and J. Steele: Tetrahedron., 1995, vol. 51(30), pp. 8135–73.10.1016/0040-4020(95)00467-M ↗
29. P.P. Pescarmona, J.C. van der Waal, I.E. Maxwell, and T. Maschmeyer: Catal. Lett., 1999, vol. 63(1), pp. 1–11.10.1023/A:1019000601210 ↗
30. L.A. Thompson and J.A. Ellman: Chem. Rev., 1996, vol. 96(1), pp. 555–600.10.1021/cr9402081 ↗
31. Y. Zhao, N. Sargent, K. Li, and W. Xiong: Materialia., 2020, vol. 13, p. 100835.10.1016/j.mtla.2020.100835 ↗
32. J.W. Pegues, M.A. Melia, R. Puckett, S.R. Whetten, N. Argibay, and A.B. Kustas: Addit. Manuf., 2021, vol. 37, p. 101598.
33. K. Huang, C. Kain, N. Diaz-Vallejo, Y. Sohn, and L. Zhou: J. Manuf. Process., 2021, vol. 66, pp. 494–505.10.1016/j.jmapro.2021.04.027 ↗
34. D. Kong, C. Dong, X. Ni, L. Zhang, C. Man, J. Yao, Y. Ji, Y. Ying, K. Xiao, X. Cheng, and X. Li: J. Alloys Compd., 2019, vol. 785, pp. 826–37.10.1016/j.jallcom.2019.01.263 ↗
35. M.A. Melia, S.R. Whetten, R. Puckett, M. Jones, M.J. Heiden, N. Argibay, and A.B. Kustas: Appl. Mater. Today., 2020, vol. 19, p. 100560.10.1016/j.apmt.2020.100560 ↗
36. M.L. Green, I. Takeuchi, and J.R. Hattrick-Simpers: J. Appl. Phys., 2013, vol. 113(23), p. 231101.10.1063/1.4803530 ↗
37. S. Liu, A.P. Stebner, B.B. Kappes, and X. Zhang: Addit. Manuf., 2021, vol. 39, p. 101877.
38. D.B. Miracle, M. Li, Z. Zhang, R. Mishra, and K.M. Flores: Annu. Rev. Mater. Res., 2021, vol. 51(1), pp. 131–64.10.1146/annurev-matsci-080619-022100 ↗
39. K.L. Kruger: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, A. Di Gianfrancesco, ed., Woodhead Publishing, 2017, pp. 511–545.10.1016/B978-0-08-100552-1.00015-4 ↗
40. L.M. Pike: ASME Turbo Expo 2006: Power for Land, Sea, and Air, 2006.
41. M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, J.A. Hawk, R.C. Buckingham, H.S. Kitaguchi, and S. Tin: Metall. Mater. Trans. A., 2020, vol. 51A(6), pp. 2626–50.10.1007/s11661-020-05773-6 ↗
42. K. Moussaoui, W. Rubio, M. Mousseigne, T. Sultan, and F. Rezai: Mater. Sci. Eng. A., 2018, vol. 735, pp. 182–90.10.1016/j.msea.2018.08.037 ↗
43. A. Deshpande, S. Deb Nath, S. Atre, and K. Hsu: Metals., 2020, vol. 10(5), p. 629.10.3390/met10050629 ↗
44. M. Balbaa, S. Mekhiel, M. Elbestawi, and J. McIsaac: Mater. Des., 2020, vol. 193, p. 108818.10.1016/j.matdes.2020.108818 ↗
45. R. Otto, V. Brøtan, A.S. Azar, and O. Åsebø: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Springer International Publishing, Cham, 2019.
46. J. Boswell, J. Jones, N. Barnard, D. Clark, M. Whittaker, and R. Lancaster: Mater. Des., 2021, vol. 205, p. 109725.10.1016/j.matdes.2021.109725 ↗
47. E. Liverani, S. Toschi, L. Ceschini, and A. Fortunato: J. Mater. Process. Technol., 2017, vol. 249, pp. 255–63.10.1016/j.jmatprotec.2017.05.042 ↗
48. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods., 2012, vol. 9(7), pp. 671–5.10.1038/nmeth.2089 ↗
49. B. Kappes, S. Moorthy, D. Drake, H. Geerlings, and A. Stebner, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, Springer International Publishing, Cham, 2018.
50. S.W. Hughes: Phys. Educ., 2005, vol. 40(5), pp. 468–74.10.1088/0031-9120/40/5/008 ↗
51. International, A., ASTM, 2013.
52. M. Tang, P.C. Pistorius, and J.L. Beuth: Addit. Manuf., 2017, vol. 14, pp. 39–48.
53. W.E. King, H.D. Barth, V.M. Castillo, G.F. Gallegos, J.W. Gibbs, D.E. Hahn, C. Kamath, and A.M. Rubenchik: J. Mater. Process. Technol., 2014, vol. 214(12), pp. 2915–25.10.1016/j.jmatprotec.2014.06.005 ↗
54. J. Risse and C. Broeckmann: Lehrstuhl für Lasertechnik, 2019.
55. J. Zhang, D. Gu, Y. Yang, H. Zhang, H. Chen, D. Dai, and K. Lin: Engineering., 2019, vol. 5(4), pp. 736–45.10.1016/j.eng.2019.07.003 ↗
56. C.D. Boley, S.A. Khairallah, and A.M. Rubenchik: Appl. Opt., 2015, vol. 54(9), pp. 2477–82.10.1364/AO.54.002477 ↗
57. U. Scipioni Bertoli, A.J. Wolfer, M.J. Matthews, J.-P.R. Delplanque, and J.M. Schoenung: Mater. Des., 2017, vol. 113, pp. 331–40.10.1016/j.matdes.2016.10.037 ↗
58. X. Wang, L.N. Carter, B. Pang, M.M. Attallah, and M.H. Loretto: Acta Mater., 2017, vol. 128, pp. 87–95.10.1016/j.actamat.2017.02.007 ↗
59. P. Promoppatum, S.-C. Yao, P.C. Pistorius, and A.D. Rollett: Engineering., 2017, vol. 3(5), pp. 685–94.10.1016/J.ENG.2017.05.023 ↗
60. J. Xu, H. Gruber, R. Boyd, S. Jiang, R.L. Peng, and J.J. Moverare: Materialia., 2020, vol. 10, p. 100657.10.1016/j.mtla.2020.100657 ↗
61. K. Amato, J. Hernandez, L. Murr, E. Martinez, S. Gaytan, P. Shindo, and S. Collins: J. Mater. Sci. Res., 2012, vol. 1(2), p. 3.
62. L.O. Osoba, R.G. Ding, and O.A. Ojo: Mater. Charact., 2012, vol. 65, pp. 93–9.10.1016/j.matchar.2011.12.009 ↗
63. G.E. Bean, T.D. McLouth, D.B. Witkin, S.D. Sitzman, P.M. Adams, and R.J. Zaldivar: J. Mater. Eng. Perform., 2019, vol. 28(4), pp. 1942–9.10.1007/s11665-019-03980-w ↗
64. Y.T. Tang, C. Panwisawas, J.N. Ghoussoub, Y. Gong, J.W.G. Clark, A.A.N. Németh, D.G. McCartney, and R.C. Reed: Acta Mater., 2021, vol. 202, pp. 417–36.10.1016/j.actamat.2020.09.023 ↗
65. B. Zhang, P. Wang, Y. Chew, Y. Wen, M. Zhang, P. Wang, G. Bi, and J. Wei: Mater. Sci. Eng. A., 2020, vol. 794, p. 139941.10.1016/j.msea.2020.139941 ↗