journal article·2020-10Open access

Microstructure Evolution and Recrystallization Resistance of a 7055 Alloy Fabricated by Spray Forming Technology and by Conventional Ingot Metallurgy

Zhiqiang Xie, Zhihong Jia, Kaiyun Xiang, Yaping Kong, Zhenguo Li, Xi Fan, Wantai Ma, Hao Zhang, Lin Lin, Knut Marthinsen, Qing Liu

Abstract

The effect of different fabricating processes (spray forming and conventional casting) and homogenization treatment on the microstructure of an 7055 alloy was investigated by optical microscopy (OM), scanning electron microscopy (SEM), electron probe X-ray micro-analyzer (EPMA), and transmission electron microscopy (TEM). It was found that the grain size of the as-deposited (spray formed) 7055 alloy had half the size as that of the as-cast 7055 alloy and there was no Al2CuMg phase that embedded in the coarse Mg(Zn, Cu, Al)2 phase distributed along the grain boundaries in the as-deposited 7055 alloy. No segregation of zirconium was observed in the as-deposited 7055 alloy. After homogenization heating at 350 °C/5 hours + 470 °C/24 hours, Al3Zr dispersoids were inhomogeneously distributed within grains in the traditionally cast 7055 alloy, while more homogeneously distributed within grains in the spray-formed 7055 alloy. Compared with the traditional cast 7055 alloy, the uniform distribution of Al3Zr dispersoids in the spray-formed 7055 alloy retards recrystallization more effectively. This investigation highlights the advantage of spray forming technology on improving microstructure of a 7055 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. J.C. Williams and E.A. Starke: Acta Mater., 2003, vol. 51, pp. 5775-99.10.1016/j.actamat.2003.08.023 ↗
2. M. Dumont, W. Lefebvre, B. Doisneau-Cottignies and A. Deschamps: Acta Mater., 2005, vol. 53, pp. 2881-92.10.1016/j.actamat.2005.03.004 ↗
3. J. Ren, R.C. Wang, Y. Feng, C.Q. Peng and Z.Y. Cai: Vacuum, 2019, vol. 161, pp. 434-42.10.1016/j.vacuum.2019.01.013 ↗
4. H. She, D. Shu, J. Wang and B.D. Sun: Mater. Charact., 2016, vol. 113, pp. 189-97.10.1016/j.matchar.2016.01.020 ↗
5. S.D. Liu, C.B. Li, S.Q. Han, Y.L. Deng and X.M. Zhang: J. Alloys Compd., 2015, vol. 625, pp. 34-43.10.1016/j.jallcom.2014.10.195 ↗
6. M. M. Sharma, M. F. Amateau and T. J. Eden: Acta Mater., 2005, vol. 53, pp. 2919-24.10.1016/j.actamat.2005.03.007 ↗
7. J. M. Schreiber, Z. R. Omcikus, T. J. Eden, M. M. Sharma, V. Champagne and S. N. Patankar: J. Alloys Compd., 2014, vol. 617, pp. 135-39.10.1016/j.jallcom.2014.07.184 ↗
8. H.C. Yu, M.P. Wang, Y.L. Jia, Z. Xiao, C. Chen, Q. Lei, Z. Li, W. Chen, H. Zhang, Y.G. Wang and C.Y. Cai: J. Alloys Compd., 2014, vol. 601, pp. 120-25.10.1016/j.jallcom.2014.02.126 ↗
9. B. Liu, Q. Lei, L.Q. Xie, M.P. Wang and Z. Li: Mater. Des., 2016, vol. 96, pp. 217-23.10.1016/j.matdes.2016.02.011 ↗
10. X.D. Wang, Q.L. Pan, L.L. Liu, S.W. Xiong, W.Y. Wang, J.P. Lai, Y.W. Sun and Z.Q. Huang: Mater. Charact., 2018, vol. 144, pp. 131-40.10.1016/j.matchar.2018.07.012 ↗
11. Y.G. Yang, Y.T. Zhao, X.Z. Kai, Z. Zhang, H. Zhang, R. Tao, G. Chen, H.S. Yin and M. Wang: Mater. Res. Express., 2018, vol. 5, pp. 1-21.
12. Y. Liu, D.M. Jiang, W.L. Xie, J. Hu and B.R. Ma: Mater. Charact., 2014, vol. 93, pp. 173-83.10.1016/j.matchar.2014.04.004 ↗
13. P.F. Jia, Y.H. Cao, Y.D. Geng, L.Z. He, N. Xiao and J.Z. Cui: Mater. Sci. Eng. A, 2014, vol. 612, pp. 335-42.10.1016/j.msea.2014.06.027 ↗
14. Z.Y. Guo, G. Zhao and X.-G. Chen: Mater. Charact., 2015, vol. 102, pp. 122-30.10.1016/j.matchar.2015.02.016 ↗
15. K.E. Knipling, D.C. Dunand and D.N. Seidman: Metall. Mater. Trans. A., 2007, vol. 38, pp. 2552-63.10.1007/s11661-007-9283-6 ↗
16. M.S. VladivojOcenasek: Mater. Charact., 2001, vol. 47, pp. 157-62.10.1016/S1044-5803(01)00165-6 ↗
17. Z.-H. Jia, J.-P. Couzinie, N. Cherdoudi, I. Guillot, L. Arnberg, P. Åsholt, S. Brusethaug, B. Barlas and D. Massinon: Trans. Nonferr. Met. Soc. China., 2012, vol. 22, pp. 1860-65.10.1016/S1003-6326(11)61398-8 ↗
18. D. Tsivoulas and J.D. Robson: Acta Mater., 2015, vol. 93, pp. 73-86.10.1016/j.actamat.2015.03.057 ↗
19. J.D. Robson and P.B. Prangnell: Acta Mater., 2001, vol. 49, pp. 599-613.10.1016/S1359-6454(00)00351-7 ↗
20. J.D. Robson: Mater. Sci. Eng. A, 2002, vol. 338, pp. 219-29.10.1016/S0921-5093(02)00061-8 ↗
21. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323-44.10.1016/0001-6160(77)90109-2 ↗
22. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, 2nd ed., Elsevier Science Publishers, New York, 2004, pp. 285-318.10.1016/B978-008044164-1/50013-X ↗
23. W.T. Huo, J.T. Shi, L.G. Hou and J.S. Zhang: J. Mater. Process. Technol., 2017, vol. 239, pp. 303-14.10.1016/j.jmatprotec.2016.08.027 ↗
24. Q.H. Zang, H.S. Yu, Y.S. Lee, M.S. Kim and H.W. Kim: Mater. Charact., 2019, vol. 151, pp. 404-13.10.1016/j.matchar.2019.03.019 ↗
25. C. Schwarze, R. DarvishiKamachali and I. Steinbach: Acta Mater., 2016, vol. 106, pp. 59-65.10.1016/j.actamat.2015.10.045 ↗
26. L. Vanherpe, N. Moelans, B. Blanpain and S. Vandewalle: Comput. Mater. Sci., 2010, vol. 49, pp. 340-50.10.1016/j.commatsci.2010.05.020 ↗
27. K. Chang, J. Kwon and C.K. Rhee: Comput. Mater. Sci., 2018, vol. 142, pp. 297-302.10.1016/j.commatsci.2017.10.030 ↗
28. E. Nes, N. Ryum and O. Hunderi: Acta Metall., 1985, vol. 33, pp. 11-22.10.1016/0001-6160(85)90214-7 ↗