journal article·2008-11

Corrosion of 2205 Duplex Stainless Steel Weldment in Chloride Medium Containing Sulfate-Reducing Bacteria

P.J. Antony, R.K. Singh Raman, Pradeep Kumar, R. Raman

Publisher page

Abstract

Influence of changes in microstructure caused due to welding on microbiologically influenced corrosion of a duplex stainless steel was studied by exposing the weldment and parent metal to chloride medium containing sulfate-reducing bacteria (SRB). Identically prepared coupons (same area and surface finish) exposed to sterile medium were used as the control. Etching-type attack was observed in the presence of SRB, which was predominant in the heat-affected zone (HAZ) of the weldment. The anodic polarization studies indicated an increase in current density for coupon exposed to SRB-containing medium as compared to that obtained for coupon exposed to sterile medium. The scanning electron microscopy (SEM) observations after anodic polarization revealed that the attack was preferentially in the ferrite phase of HAZ of the weldment, whereas it was restricted to the austenite phase of the parent metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. H.-Y. Liou, R.-I. Hsieh, W.-T. Tsai: Mater. Chem. Phys., 2002, vol. 74, pp. 33–4210.1016/S0254-0584(01)00409-6 ↗
2. J. Charles: Duplex Stainless Steels ‘91, vol. 1, Proc. Conf., Les Editions de Physique, Paris, 1991, pp. 3–48
3. S.S.M. Tavares, J.M. Pardal, L.D. Lima, I.N. Bastos, A.M. Nascimento, J.A. de Souza: Mater. Charact., 2007, vol. 58, pp. 610–1610.1016/j.matchar.2006.07.006 ↗
4. Y.S. Sato, H. Kokawa: Scripta Mater., 1999, vol. 40, pp. 659–6310.1016/S1359-6462(98)00483-7 ↗
5. T.G. Gooch: in Duplex Stainless Steels 91, J. Charles, S. Bernhardsson, eds., Les Editions de Physique, Les Ulis, France, 1991, pp. 211–15
6. I. Varol, W.A. Baeslack, J.C. Lippold: Metallography, 1989, vol. 23, pp. 1–1910.1016/0026-0800(89)90037-2 ↗
7. C.H. Shek, G.J. Shen, J.K.L. Lai, B.J. Duggan: Mater. Sci. Technol., 1994, vol. 10, pp. 306–1110.1179/mst.1994.10.4.306 ↗
8. M.B. Cortie, E.M.L.E.M. Jackson: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2477–8410.1007/s11661-997-0005-x ↗
9. J.-O. Nilsson, L. Karlsson, J.-O. Andersson: Mater. Sci. Technol., 1995, vol. 11, pp. 276–8310.1179/mst.1995.11.3.276 ↗
10. K.M. Ismail, A. Jayaraman, T.K. Wood, J.C. Earthman: Electrochim. Acta, 1999, vol. 44, pp. 4685–9210.1016/S0013-4686(99)00218-2 ↗
11. C. Xu, Y. Zhang, G. Cheng, W. Zhu: Mater. Sci. Eng. A, 2007, vol. 443, pp. 235–4110.1016/j.msea.2006.08.110 ↗
12. S.E. Werner, C.A. Johnson, N.J. Laycock, P.T. Wilson, and B.J. Webster: Corros. Sci., 1998, vol. 40, pp. 465–8010.1016/S0010-938X(97)00160-1 ↗
13. P.J. Antony, S. Chongdar, P. Kumar, R. Raman: Electrochim. Acta, 2007, vol. 52, pp. 3985–9410.1016/j.electacta.2006.11.016 ↗
14. A. Neville, T. Hodgkiess: Br. Corros. J., 2000, vol. 35, pp. 60–6910.1179/000705900101501092 ↗
15. S.H. Flint, J.D. Brooks, P.J. Bremer: J. Food Eng., 2000, vol. 43, pp. 235–4210.1016/S0260-8774(99)00157-0 ↗
16. K.R. Sreekumari, K. Takao, T. Ujiro, Y. Kikuchi: ISIJ Int., 2004, vol. 44 pp. 858–6410.2355/isijinternational.44.858 ↗
17. F.A. Lopes, P. Morin, R. Oliveira, L.F. Melo: Coll. Surf. B, 2005, vol. 46 pp. 127–3310.1016/j.colsurfb.2005.07.020 ↗
18. R.P. George, P. Muraleedharan, K.R. Sreekumari, H.S. Khatak: Biofouling, 2003, vol. 19, pp. 1–810.1080/08927010290031017 ↗
19. E. Beraha, S. Shpigler: Color Metallography, ASM, Metals Park, OH, 1977
20. V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, S. Sundaresan: Mater. Sci. Eng. A, 2003, vol. 358, pp. 9–1610.1016/S0921-5093(03)00077-7 ↗
21. T.S. Rao, A.J. Kora, B. Anupkumar, S.V. Narasimhan, R. Feser: Corros. Sci. 2005, vol. 47, pp. 1071–8410.1016/j.corsci.2004.07.025 ↗
22. H.A. Videla: Manual of Biocorrosion, CRC Lewis Publishers, Boca Raton, FL, 1996, pp. 214–54
23. Standard Methods for the Examination of Water and Wastewater, 17th ed., APHA, Washington, DC, 1985, pp. 475–76
24. R.C. Newman, B.J. Webster, R.G. Kelly: ISIJ Int., 1991, vol. 31, pp. 201–0910.2355/isijinternational.31.201 ↗
25. V.K. Gouda, H.M. Shalaby, I.M. Banat: Corros. Sci., 1993, vol. 35, pp. 683–9110.1016/0010-938X(93)90204-T ↗
26. S.S.M. Tavares, V.F. Terra, J.M. Pardal, M.P.C. Fonseca: J. Mater. Sci., 2005, vol. 40, pp. 145–5410.1007/s10853-005-5700-7 ↗
27. T.H. Chen, J.R. Yang: Mater. Sci. Eng. A, 2002, vol. 338. pp. 166–8110.1016/S0921-5093(02)00065-5 ↗
28. M. Miura, M. Koso, T. Kudo, H. Tsuge: Q. J. Jpn. Weld. Soc., 1989, vol. 7, pp. 94–10010.2207/qjjws.7.94 ↗
29. C.M. Garzon, C.A. Serna, S.D. Brandi, A.J. Ramirez: J. Mater. Sci., 2007, vol. 42, pp. 9021–2910.1007/s10853-007-1881-6 ↗
30. S. Hertzman, P.J. Ferreira, B. Brolund: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 277–8510.1007/s11661-997-0130-6 ↗