journal article·2020-05

The Role of Internal Oxides on the Liquid Metal Embrittlement Cracking During Resistance Spot Welding of the Dual Phase Steel

A. Ghatei Kalashami, C. DiGiovanni, M. H. Razmpoosh, F. Goodwin, N. Y. Zhou

Publisher page

Abstract

One of the most effective ways to improve reactive wetting of dual phase (DP) steels during galvanizing process is annealing under relatively high oxygen partial pressure. This annealing process can lead to internal oxide formation rather than external ones. Since these oxides are mostly observed in grain boundaries (GBs), their presence could influence GB-related phenomena such as liquid metal embrittlement (LME) cracking during further manufacturing processes such as resistance spot welding (RSW). The present work has shown that internal oxides located at GBs assisted LME crack formation during RSW of DP steel. Two types of LME cracks were observed in the shoulder and center of the weld. It has been shown that at the initial stages of welding time, LME cracks initiate in the shoulder of the nugget by the Zn diffusion into oxide-bearing GBs. As welding time continues, higher temperatures and tensile stresses are applied to the steel sheets which allow center cracks to be formed more easily due to the presence of oxides which degrade the GBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. K.F. Chen, I. Aslam, B. Li, R.L. Martens, J.R. Goodwin, F.E. Goodwin, and M.F. Horstemeyer: Metall. Mater. Trans. A, 2019, vol. 50, pp. 3748–57.10.1007/s11661-019-05276-z ↗
2. F. Farias, M. Balbi, M.N. Batista, and I. Alvarez-Armas: Metall. Mater. Trans. A, 2018, vol. 49, pp. 6010–21.10.1007/s11661-018-4954-z ↗
3. C.C. Tasan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, and D. Raabe: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 391–431.10.1146/annurev-matsci-070214-021103 ↗
4. J. Zhao and Z. Jiang: Prog. Mater. Sci., 2018, vol. 94, pp. 174–242.10.1016/j.pmatsci.2018.01.006 ↗
5. G. Rosenberg, I. Sinaiová, and Ľ. Juhar: Mater. Sci. Eng. A, 2013, vol. 582, pp. 347–58.10.1016/j.msea.2013.06.035 ↗
6. S.M.A. Shibli, B.N. Meena, and R. Remya: Surf. Coatings Technol., 2015, vol. 262, pp. 210–5.10.1016/j.surfcoat.2014.12.054 ↗
7. M. Pourmajidian and J.R. McDermid: Surf. Coatings Technol., 2019, vol. 357, pp. 418–26.10.1016/j.surfcoat.2018.10.028 ↗
8. G. SeyedMousavi and J.R. McDermid: Surf. Coat. Technol., 2018, vol. 351, pp. 11–20.10.1016/j.surfcoat.2018.06.060 ↗
9. Y.F. Gong, K.I.M. HanSoo, and B.C. De Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
10. R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
11. M. Pourmajidian and J.R. Mcdermid: ISIJ Int., 2018, vol. 58, pp. 1635–43.10.2355/isijinternational.ISIJINT-2017-688 ↗
12. H.S. Nam and D.J. Srolovitz: Acta Mater., 2009, vol. 57, pp. 1546–53.10.1016/j.actamat.2008.11.041 ↗
13. C.W. Lee, D.W. Fan, I.R. Sohn, S.J. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2012, vol. 43, pp. 5122–7.10.1007/s11661-012-1316-0 ↗
14. L. Cho, H. Kang, C. Lee, and B.C. De Cooman: Scr. Mater., 2014, vol. 90, pp. 25–8.10.1016/j.scriptamat.2014.07.008 ↗
15. M.H. Razmpoosh, A. Macwan, E. Biro, D.L. Chen, Y. Peng, F. Goodwin, and Y. Zhou: Mater. Des., 2018, vol. 155, pp. 375–83.10.1016/j.matdes.2018.05.065 ↗
16. M.H. Razmpoosh, E. Biro, D.L. Chen, F. Goodwin, and Y. Zhou: Mater. Charact., 2018, vol. 145, pp. 627–33.10.1016/j.matchar.2018.09.018 ↗
17. D.C. Saha, I. Chang, and Y. DoPark: Mater. Charact., 2014, vol. 93, pp. 40–5110.1016/j.matchar.2014.03.016 ↗
18. R. Ashiri, M.A. Haque, C.W. Ji, M. Shamanian, H.R. Salimijazi, and Y. DoPark: Scr. Mater., 2015, vol. 109, pp. 6–10.10.1016/j.scriptamat.2015.07.006 ↗
19. R. Ashiri, M. Shamanian, H.R. Salimijazi, M.A. Haque, J.H. Bae, C.W. Ji, K.G. Chin, and Y. DoPark: Scr. Mater., 2016, vol. 114, pp. 41–710.1016/j.scriptamat.2015.11.027 ↗
20. J. Barthelmie, A. Schram, and V. Wesling: Liquid Metal Embrittlement in Resistance Spot Welding and Hot Tensile Tests of Surface-Refined TWIP Steels, IOP Publishing, Bristol, 2016.10.1088/1757-899X/118/1/012002 ↗
21. H. Lee, M.C. Jo, S.S. Sohn, S.H. Kim, T. Song, S.K. Kim, H.S. Kim, N.J. Kim, and S. Lee: Mater. Charact., 2019, vol. 147, pp. 233–41.10.1016/j.matchar.2018.11.008 ↗
22. Y.G. Kim, I.J. Kim, J.S. Kim, Y. IlChung, and D.Y. Choi: Mater. Trans., 2014, vol. 55, pp. 171–5.10.2320/matertrans.M2013244 ↗
23. D.Y. Choi, S.H. Uhm, C.M. Enloe, H. Lee, G. Kim, and C. Horvath: Mater. Sci. Technol., 2017, https://doi.org/10.7449/2017mst/2017/mst_2017_454_46210.7449/2017mst/2017/mst_2017_454_462 ↗
24. D.Y. Choi, A. Sharma, S.H. Uhm, and J.P. Jung: Met. Mater. Int., 2018, vol. 25, pp. 219–2810.1007/s12540-018-0180-x ↗
25. R. Ashiri, H. Mostaan, and Y. DoPark: Metall. Mater. Trans. A, 2018, vol. 49, pp. 6161–72.10.1007/s11661-018-4900-0 ↗
26. C. DiGiovanni, E. Biro, and N.Y. Zhou: Sci. Technol. Weld. Join., 2019, vol. 24, pp. 218–24.10.1080/13621718.2018.1518363 ↗
27. Z. Ling, T. Chen, L. Kong, M. Wang, H. Pan, and M. Lei: Metall. Mater. Trans. A, 2019, vol. 50, pp. 5128–42.10.1007/s11661-019-05388-6 ↗
28. E. Tolf, J. Hedegård, and A. Melander: Sci. Technol. Weld. Join., 2012, vol. 18, pp. 25–31.10.1179/1362171812Y.0000000068 ↗
29. J. Frei and M. Rethmeier: Weld. World, 2018, vol. 62, pp. 1031–7.10.1007/s40194-018-0619-1 ↗
30. American welding society: test method for evaluating the resistance spot welding behavior of automotive sheet steel materials (AWS D8.9M), 2012, pp. 1–107.
31. Group ESI, SYSWORLD 2010. Technical description of capabilities, 2010.
32. M. Pourmajidian and J.R. McDermid: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1795–808.10.1007/s11661-018-4513-7 ↗
33. J.M. Mataigne, M. Lamberigts, and V. Leroy: Minerals, Metals & Materials Society, Warrendale, PA, 1992, pp. 512–28.
34. A. GhateiKalashami, X. Han, F. Goodwin and N.Y. Zhou: Surf. Coat. Technol., 2019, vol. 381, 125181.10.1016/j.surfcoat.2019.125181 ↗
35. H. Kang, L. Cho, C. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2885–905.10.1007/s11661-016-3475-x ↗
36. C. Digiovanni, L. He, U. Pistek, F. Goodwin, E. Biro, and N.Y. Zhou: J. Manuf. Process., 2020, vol. 49, pp. 1–9.10.1016/j.jmapro.2019.11.015 ↗
37. D. Bhattacharya: Mater. Sci. Technol. (United Kingdom), 2018, vol. 34, pp. 1809–29.10.1080/02670836.2018.1461595 ↗
38. E. Wachowicz and A. Kiejna: Comput. Mater. Sci., 2008, vol. 43, pp. 736–43.10.1016/j.commatsci.2008.01.063 ↗
39. C. Chen, S. Lv, Z. Wang, M. Saito, N. Shibata, T. Taniguchi, and Y. Ikuhara: Appl. Phys. Lett., 2013, vol. 102, pp. 1–6.
40. A. De VasconcelosVarela, H.D. De Deus, M.C. De Siqueira, M.C. Rezende, and L.H. De Almeida: J. Mater. Res. Technol., 2018, vol. 7, pp. 319–25.10.1016/j.jmrt.2018.02.008 ↗
41. U. Krupp, K. Wackermann, H.J. Christ, M.H. Colliander, and K. Stiller: Oxid. Met., 2017, vol. 88, pp. 3–14.10.1007/s11085-016-9707-z ↗
42. K. Fujii, T. Miura, H. Nishioka, and K. Fukuya: In: J.T. Busby, G. Ilevbare, and P.L. Andresen, eds., Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors. Springer, Cham.
43. M. Tumuluru: Weld. J., 2019, vol. 98, pp. 351S-64S.10.29391/2019.98.029 ↗