journal article·2019-12

A Newly Generated Nearly Lamellar Microstructure in Cast Ti-48Al-2Nb-2Cr Alloy for High-Temperature Strengthening

Zitong Gao, Jieren Yang, Yulun Wu, Rui Hu, Sang-Lan Kim, Young-Won Kim

Publisher page

Abstract

Alloy 4822 (Ti-48Al-2Cr-2Nb at. pct) cast material was given a controlled heat treatment cycle to generate a casting nearly lamellar (CNL) microstructure that enhances the temperature capability over its current engineering casting duplex (CDP) microstructure form. The cycle consisted of three steps: a short α field annealing, an α + γ field annealing, and then aging at a low temperature, with each step being followed by controlled cooling. The resulted microstructure is shown to be a mixture of non-uniformly distributed ~ 250 μm size lamellar colonies containing ~ 0.15 µm spaced laths. Standard tensile testing at 700 °C shows a yield stress of 344 MPa that is ~ 55 MPa greater than that of the current engineering CDP form. The sequential microstructure evolution processes following the three-step thermal cycle are assessed and explained in terms of phase transformations taking place across and below the α transus upon isothermal treatment and subsequent cooling. The resulted increases in high-temperature strengthening are explained by the colony and γ grain size distributions. The strengthening mechanism along with the significance is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Y.W. Kim: JOM, 1994, vol. 46, pp. 30-49.10.1007/BF03220745 ↗
2. H. Clemens and H. Kestler: Adv. Eng. Mater., 2000, vol. 2, pp. 551-70.10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
3. Y-W. Kim and S.L. Kim: JOM, 2018, vol. 70, pp. 553-60.10.1007/s11837-018-2747-x ↗
4. C. Austin and T. Kelly: Structural Intermetallics, 1993, TMS, pp. 143–50.
5. B. London, D. Larsen, D.A. Wheeler, and P.R. Aimone: Structural Intermetallics, 1993, TMS, pp. 151–57.
6. F. Appel, J.D.H. Paul, M. Oehring, C. Buque, C. Klinkenberg, and T. Carneiro: Niobium for High Temperature Applications, 2004, TMS, pp. 139–52.
7. H. Clemens, H.F. Chladil, W. Wallgram, G.A. Zickler, R. Gerling, K.-D. Liss, S. Kremmer, V. Güther, and W. Smarsl: Intermetallics, 2008, vol. 16, pp. 827-33.10.1016/j.intermet.2008.03.008 ↗
8. G.L. Chen, W.J. Zhang, Z.C. Liu, S.J. Li, and Y-W. Kim: Gamma Titanium Aluminides 1999, 1999, TMS, pp. 371–80.
9. M.J. Weimer and T.J. Kelly: GE Aviation, Ohio, Unpublished Results Presented at 3rd int’l Workshop on Gamma TiAl Technologies, 2006.
10. B.P. Bewlay, M. Weimer, T. Kelly, A. Suzuki, and P.R. Subramanian: Intermetallic-Based Alloys-Science, Technology, and Applications, Mater. Res. Soc. Symp. Proc., Warrendale, PA, 2012, vol. 1516, pp. 49–58.10.1557/opl.2013.44 ↗
11. W. Smarsly, J. Esslinger, and H. Clemens: MTU, Germany, research and development results presented at GTA-2014, 2014.
12. Habel U, Heutling F, Helm D, Kunze C, Smarsly W, Das G, Clemens H: World Titanium. Wiley, Hoboken, pp. 1223-27 (2015)
13. Y-W. Kim and D.M. Dimiduk: JOM, 1991, vol. 41, pp. 40-47.10.1007/BF03221103 ↗
14. Y-W. Kim, Acta Metall. Mater. 1992, vol. 40, pp. 1121-34.10.1016/0956-7151(92)90411-7 ↗
15. X.J. Xu, Y.L. Wang, F.Z. Gao, and G.L. Chen: J. alloys compd., 2006, vol. 414, pp. 131-36.10.1016/j.jallcom.2005.02.110 ↗
16. X.J. Xu, J.P. Lin, Z.K. Teng, Y.L. Wang, and G.L. Chen: Mater. Lett., 2007, vol. 61, pp. 369-73.10.1016/j.matlet.2006.04.115 ↗
17. G. Yang, H.C. Kou, Y. Liu, J.R. Yang, J. Wang, S.Y. Zhang, J.S. Li, and H.Z. Fu: Intermetallics, 2015, vol. 63, pp. 1-6.10.1016/j.intermet.2015.03.015 ↗
18. Y.W. Kim: JOM, 1989, vol. 41, pp. 24-30.10.1007/BF03220267 ↗
19. B.D. Worth, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1995, vol. 264, pp. 2947-59.10.1007/BF02669651 ↗
20. Y.W. Kim, Mater. Sci. Eng. A, 1995, vol. A192/193, pp. 519-533.10.1016/0921-5093(94)03271-8 ↗
21. Y.W. Kim: Intermetallics, 1998, vol. 6, pp. 623-28.10.1016/S0966-9795(98)00037-5 ↗
22. J.C. Schuster and M.Palm: J. Phase Equilib. Diff., 2006, vol. 27, pp. 255–77.10.1361/154770306X109809 ↗
23. U.R. Kattner, J.C. Lin, and Y.A. Chang: Metall. Mater. Trans. A, 1992, vol. 23, pp. 2081-90.10.1007/BF02646001 ↗
24. Y.L. Jung and J.K. Park: Acta Mater., 1998, vol. 46, pp. 4123-30.10.1016/S1359-6454(98)00103-7 ↗
25. M.J. Blackburn: The Science Technology & Application of Titanium, Pergamon Press, Oxford, United Kindom, 1970, pp. 633-43.10.1016/B978-0-08-006564-9.50071-3 ↗
26. A. Denquin and S. Naka: Acta Mater., 1996, vol. 44, pp. 343-52.10.1016/1359-6454(95)00167-4 ↗
27. S.A. Jones and M.J. Kafuman: Acta Metall. Mater., 1993, vol. 41, pp. 387-98.10.1016/0956-7151(93)90069-5 ↗
28. M. Charpentier, A. Hazotte, and D. Daloz: Mater. Sci. Eng. A, 2008, vol. 491, pp. 321-30.10.1016/j.msea.2008.02.009 ↗
29. Z.W. Huang: Scr. Mater., 2005, vol. 52, pp. 1021-25.10.1016/j.scriptamat.2005.01.024 ↗
30. Y.W. Cui, G.L. Xu, R. Kato, X.G. Lu, R. Kainuma, and K. Ishida: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1621–25.10.1007/s11661-012-1586-6 ↗
31. M. Koppers, C. Herzig, M. Friesel, and Y. Mishin: Acta. Mater., 1997, vol. 45, pp. 4181-91.10.1016/S1359-6454(97)00078-5 ↗
32. C.M. Sellars and J. A. Whiteman: Metal Sci., 1978, vol. 13, pp. 187-94.10.1179/msc.1979.13.3-4.187 ↗
33. S.F. Franzén and J. Karlsson: Master’s Thesis, Chalmers University of Technology, Gothenburg, Sweden, 2010.
34. J.H. Moll: JOM, 2000, vol. 52, 32-34.10.1007/s11837-000-0030-3 ↗
35. H. Clemens and S. Mayer: Adv. Eng. Mater., 2013, vol. 15, pp. 191-215.10.1002/adem.201200231 ↗
36. Y. Xia, P. Yu, G.B. Schaffer, and M. Qian: Mater. Sci. Eng. A, 2013, vol. 574, pp. 176-85.10.1016/j.msea.2013.03.023 ↗
37. Q. Wang, R. Chen, X. Gong, J. Guo, Y. Su, H. Ding, and H. Fu: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4555–64.10.1007/s11661-018-4765-2 ↗
38. S. Biamino, A. Penna, U. Ackelid, S. Sabbadini, O. Tassa, P. Fino, M. Pavese, P. Gennaro, and C. Badini: Intermetallics, 2011, vol. 19, pp. 776-81.10.1016/j.intermet.2010.11.017 ↗
39. D. Hu: Intermetallics, 2001, vol. 9, pp. 1037-43.10.1016/S0966-9795(01)00079-6 ↗
40. X.H. Wu: Intermetallics, 2006, vol. 14, pp. 1114-22.10.1016/j.intermet.2005.10.019 ↗