journal article·2018-07Open access

In Situ Local Measurement of Austenite Mechanical Stability and Transformation Behavior in Third-Generation Advanced High-Strength Steels

Fadi Abu-Farha, Xiaohua Hu, Xin Sun, Yang Ren, Louis G. Hector, Grant Thomas, Tyson W. Brown

Abstract

Austenite mechanical stability, i.e., retained austenite volume fraction (RAVF) variation with strain, and transformation behavior were investigated for two third-generation advanced high-strength steels (3GAHSS) under quasi-static uniaxial tension: a 1200 grade, two-phase medium Mn (10 wt pct) TRIP steel, and a 980 grade, three-phase TRIP steel produced with a quenching and partitioning heat treatment. The medium Mn (10 wt pct) TRIP steel deforms inhomogeneously via propagative instabilities (Luders and Portevin Le Châtelier-like bands), while the 980 grade TRIP steel deforms homogenously up to necking. The dramatically different deformation behaviors of these steels required the development of a new in situ experimental technique that couples volumetric synchrotron X-ray diffraction measurement of RAVF with surface strain measurement using stereo digital image correlation over the beam impingement area. Measurement results with the new technique are compared to those from a more conventional approach wherein strains are measured over the entire gage region, while RAVF measurement is the same as that in the new technique. A determination is made as to the appropriateness of the different measurement techniques in measuring the transformation behaviors for steels with homogeneous and inhomogeneous deformation behaviors. Extension of the new in situ technique to the measurement of austenite transformation under different deformation modes and to higher strain rates is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. [1] E. DeMoor, P. J. Gibbs, J. G. Speer, D. K. Matlock, AIST Transactions, 2010, vol. 7, pp. 133-144.
2. [2] V. F. Zackay, E. R. Parker, D. Fahr, R. Busch, ASM Trans Quart, 1967, vol. 60, pp. 252-259.
3. [3] S. Martin, C. Ullrich, D. Rafaja, Materials Today: Proceedings, 2015, vol. 2, pp. S643-S646.10.1016/j.matpr.2015.07.366 ↗
4. [4] R. B. Figueiredo, F. L. Sicupira, L. R. Malheiros, M. Kawasaki, D. B. Santos, T. G. Langdon, Materials Science and Engineering: A, 2015, vol. 625, pp. 114-118.10.1016/j.msea.2014.11.091 ↗
5. [5] B. C. De Cooman, P. Gibbs, S. Lee, D. K. Matlock, Metall and Mat Trans A, 2013, vol. 44, pp. 2563-2572.10.1007/s11661-013-1638-6 ↗
6. [6] D. W. Suh, J. H. Ryu, M. S. Joo, H. S. Yang, K. Lee, H. K. D. H. Bhadeshia, Metall and Mat Trans A, 2013, vol. 44, pp. 286-293.10.1007/s11661-012-1402-3 ↗
7. 7.R. Kuziak, R. Kawalla, S. Waengler, Archives of Civil and Mechanical Engineering, 2008, vol. 8, pp. 103-117.10.1016/S1644-9665(12)60197-6 ↗
8. [8] W. J. Dan, W. G. Zhang, S. H. Li, Z. Q. Lin, Computational Materials Science, 2007, vol. 39, pp. 593-599.10.1016/j.commatsci.2006.08.013 ↗
9. J. Coryell, V. Savic, L. Hector, and S. Mishra: SAE Technical Paper, 2013, vol. 2013-01-0610,
10. [10] N. H. van Dijk, A. M. Butt, L. Zhao, J. Sietsma, S. E. Offerman, J. P. Wright, S. van der Zwaag, Acta Materialia, 2005, vol. 53, pp. 5439-5447.10.1016/j.actamat.2005.08.017 ↗
11. [11] T. K. Shan, S. H. Li, W. G. Zhang, Z. G. Xu, Materials & Design, 2008, vol. 29, pp. 1810-1816.10.1016/j.matdes.2008.03.023 ↗
12. [12] P. J. Gibbs, E. De Moor, M. J. Merwin, B. Clausen, J. G. Speer, D. K. Matlock, Metall and Mat Trans A, 2011, vol. 42, pp. 3691-3702.10.1007/s11661-011-0687-y ↗
13. [13] P. J. Jacques, S. Allain, O. Bouaziz, A. De, A. F. Gourgues, B. M. Hance, Y. Houbaert, J. Huang, A. Iza-Mendia, S. E. Kruger, M. Radu, L. Samek, J. Speer, L. Zhao, S. van der Zwaag, Mater. Sci. Technol., 2009, vol. 25, pp. 567-574.10.1179/174328408X353723 ↗
14. W. Poling, V. Savic, L. Hector, A. Sachdev, X.H. Hu, A. Devaraj, and F. Abu-Farha: SAE Technical Paper, 2016, vol. 2016-01-0419, pp. https://doi.org/10.4271/2016-01-041910.4271/2016-01-0419 ↗
15. [15] E. Jimenez-Melero, N. H. van Dijk, L. Zhao, J. Sietsma, J. P. Wright, S. van der Zwaag, Materials Science and Engineering: A, 2011, vol. 528, pp. 6407-6416.10.1016/j.msea.2011.04.087 ↗
16. [16] U. Klemradt, T. Rieger, K. Herrmann, D. Carmele, S. Meyer, T. Lippmann, A. Stark, W. Bleck, Acta Physica Polonica-Series A General Physics, 2012, vol. 121, pp. 39-43.10.12693/APhysPolA.121.39 ↗
17. [17] R. Blonde, E. Jimenez-Melero, L. Zhao, J. P. Wright, E. Bruck, S. van der Zwaag, N. H. van Dijk, Materials Science and Engineering: A, 2014, vol. 618, pp. 280-287.10.1016/j.msea.2014.09.008 ↗
18. [18] H. J. Stone, M. J. Peet, H. K. D. H. Bhadeshia, P. J. Withers, S. S. Babu, E. D. Specht, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 2008, vol. 464, pp. 1009-1027.10.1098/rspa.2007.0201 ↗
19. [19] E. Cakmak, H. Choo, K. An, Y. Ren, Acta Materialia, 2012, vol. 60, pp. 6703-6713.10.1016/j.actamat.2012.08.040 ↗
20. [20] W. Wu, Y. W. Wang, P. Makrygiannis, F. Zhu, G. A. Thomas, L. G. Hector, X. Hu, X. Sun, Y. Ren, Materials Science and Engineering: A, 2018, vol. 711, pp. 611-623.10.1016/j.msea.2017.11.008 ↗
21. [21] K. Yan, K. D. Liss, I. B. Timokhina, E. V. Pereloma, Materials Science and Engineering: A, 2016, vol. 662, pp. 185-197.10.1016/j.msea.2016.03.048 ↗
22. [22] J. Zrnik, O. Muransky, P. Lukas, Z. Novy, P. Sittner, P. Hornak, Materials Science and Engineering: A, 2006, vol. 437, pp. 114-119.10.1016/j.msea.2006.04.067 ↗
23. [23] O. Muransky, P. Lukas, J. Zrnik, P. Sittner, Physica B: Condensed Matter, 2006, vol. 385, pp. 587-589.10.1016/j.physb.2006.05.367 ↗
24. 24. A. A. Saleh, D. W. Brown, E. V. Pereloma, B. Clausen, C. H. Davies, C. N. Tome, A. A. Gazder (2015) Appl. Phys. Lett., vol. 106, 17191110.1063/1.4919455 ↗
25. [25] K. Tao, D. W. Brown, S. C. Vogel, H. Choo, Metallurgical and Materials Transactions A, 2006, vol. 37, pp. 3469-3475.10.1007/s11661-006-1042-6 ↗
26. [26] T. Gnaupel-Herold, A. Creuziger, Materials Science and Engineering: A, 2011, vol. 528, pp. 3594-3600.10.1016/j.msea.2011.01.030 ↗
27. [27] M. R. Berrahmoune, S. Berveiller, K. Inal, A. Moulin, E. Patoor, Materials Science and Engineering: A, 2004, vol. 378, pp. 304-307.10.1016/j.msea.2003.10.372 ↗
28. [28] S. Brauser, A. Kromm, T. Kannengiesser, M. Rethmeier, Scripta Materialia, 2010, vol. 63, pp. 1149-1152.10.1016/j.scriptamat.2010.08.007 ↗
29. [29] A. Kromm, S. Brauser, T. Kannengi. Rethmeier, The Journal of Strain Analysis for Engineering Design, 2011, vol. 46, pp. 581-591.10.1177/0309324711403969 ↗
30. [30] Z. H. Cong, N. Jia, X. Sun, Y. Ren, J. Almer, Y. D. Wang, Metall and Mat Trans A, 2009, vol. 40, pp. 1383-1387.10.1007/s11661-009-9824-2 ↗
31. [31] X. H. Hu, K. S. Choi, X. Sun, Y. Ren, Y. D. Wang, Metall and Mat Trans A, 2016, vol. 47, pp. 5733-5749.10.1007/s11661-016-3373-2 ↗
32. [32] X. H. Hu, X. Sun, J. Hector, Y. Ren, Acta Materialia, 2017, vol. 132, pp. 230-244.10.1016/j.actamat.2017.04.028 ↗
33. 33.E. Hall: Yield Point Phenomena in Metals and Alloys. Springer, New York, 2012.
34. [34] P. G. McCormigk, Acta Metallurgica, 1972, vol. 20, pp. 351-354.10.1016/0001-6160(72)90028-4 ↗
35. [35] J. Speer, D. K. Matlock, B. C. De Cooman, J. G. Schroth, Acta Materialia, 2003, vol. 51, pp. 2611-2622.10.1016/S1359-6454(03)00059-4 ↗
36. [36] F. E. Werner, B. L. Averbach, M. Cohen, Trans. ASM, 1957, vol. 49, pp. 823-841.
37. D.V. Edmonds, K. He, F. C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 25–34.10.1016/j.msea.2006.02.133 ↗
38. B.C. De Cooman and S.W. Lee: The Mechanical Properties of 10-12% Mn Steels, 2013.
39. 39.M. A. Sutton, J. J. Orteu, H. Schreier: Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications. Springer, New York (2009).
40. [40] J. A. Bearden, Reviews of Modern Physics, 1967, vol. 39, pp. 78-124.10.1103/RevModPhys.39.78 ↗
41. Origin86 Mannual. http://www.originlab.com/, 2015
42. A. S. T. M. Standard, ASTM, West Conshohocken, PA, 2008.
43. [43] X. C. Xiong, B. Chen, M. X. Huang, J. F. Wang, L. Wang, Scripta Materialia, 2013, vol. 68, pp. 321-324.10.1016/j.scriptamat.2012.11.003 ↗
44. [44] Y. F. Shen, Y. D. Wang, X. P. Liu, X. Sun, R. Lin Peng, S. Y. Zhang, L. Zuo, P. K. Liaw, Acta Materialia, 2013, vol. 61, pp. 6093-6106.10.1016/j.actamat.2013.06.051 ↗
45. [45] M. Cohen, Trans. TMS-AIME, 1962, vol. 224, pp. 638-657.
46. [46] G. B. Olson, M. Cohen, MTA, 1975, vol. 6, pp. 791-795.10.1007/BF02672301 ↗
47. [47] D. T. Pierce, J. A. Jimenez, J. Bentley, D. Raabe, J. E. Wittig, Acta Materialia, 2015, vol. 100, pp. 178-190.10.1016/j.actamat.2015.08.030 ↗
48. [48] J. F. Butler, Journal of the Mechanics and Physics of Solids, 1962, vol. 10, pp. 313-318.10.1016/0022-5096(62)90003-0 ↗
49. [49] B. Reedlunn, S. Daly, L. Hector, P. Zavattieri, J. Shaw, Experimental Techniques, 2013, vol. 37, pp. 62-78.10.1111/j.1747-1567.2011.00717.x ↗
50. [50] H. Kato, K. Sasaki, International Journal of Plasticity, 2013, vol. 50, pp. 37-48.10.1016/j.ijplas.2013.03.011 ↗
51. [51] P. D. Zavattieri, V. Savic, L. G. Hector, J. R. Fekete, W. Tong, Y. Xuan, International Journal of Plasticity, 2009, vol. 25, pp. 2298-2330.10.1016/j.ijplas.2009.02.008 ↗
52. [52] D. A. Korzekwa, D. K. Matlock, G. Krauss, Metallurgical Transactions A, 1984, vol. 15, pp. 1221-1228.10.1007/BF02644716 ↗