Method of Evaluating Delayed Fracture Susceptibility of Tempered Martensitic Steel Showing Quasi-Cleavage Fracture
Source abstract
Abstract
Abstract The difference in the hydrogen charging methods, immersion in a NH4SCN aqueous solution, and cathodic electrolysis in a NaOH aqueous solution, did not affect the hydrogen state present in the steel, but it did affect the surface state of the specimens through corrosion, causing fracture strength to fluctuate in tensile testes. As for stress application method, the fracture strength at lower crosshead speeds in tensile tests was consistent with that found for hydrogen precharging prior to stress application in CLTs as long as hydrogen charging was conducted by cathodic electrolysis. However, the fracture strength obtained with concurrent hydrogen charging without precharging prior to stress application in CLTs was higher than that with hydrogen precharging prior to stress application in CLTs regardless of the same hydrogen content. In other words, delayed fracture susceptibility was affected by the order of hydrogen charging and stress application for quasi-cleavage fracture associated with local plastic deformation, i.e., dislocation motion. Therefore, by taking into account the cathodic electrolysis in the NaOH solution, the low crosshead speed and the order of hydrogen charging and stress application, the fracture strength in CLTs, and tensile tests coincided with respect to quasi-cleavage fracture even though the stress application methods were different.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Y. Hagihara: ISIJ Int., 2012, vol. 52, pp. 292–97.10.2355/isijinternational.52.292 ↗
2. E. Akiyama: ISIJ Int., 2012, vol. 52, pp. 307–15.10.2355/isijinternational.52.307 ↗
3. S. Takagi, Y. Toji, M. Yoshino, and K. Hasegawa: ISIJ Int., 2012, vol. 52, pp. 316–22.10.2355/isijinternational.52.316 ↗
4. M. Wang, E. Akiyama, and K. Tsuzaki: Scripta Mater., 2005, vol. 53, pp. 713–18.10.1016/j.scriptamat.2005.05.014 ↗
5. Fédération Internationale de la Précontrainte: Report on Prestressing Steel: 5. Stress corrosion cracking resistance test for prestressing tendors, Wexham Springs, Slough, 1980, pp. 1–56.
6. S. Li, E. Akiyama, N. Uno, K. Hirai, K. Tsuzaki, and B. Zhang: Corros. Sci., 2010, vol. 52, pp. 3198–204.10.1016/j.corsci.2010.05.038 ↗
7. S. Takagi and Y. Toji: ISIJ Int., 2012, vol. 52, pp. 329–31.10.2355/isijinternational.52.329 ↗
8. T. Doshida, K. Takai, and M. Ichiba: Corros. Eng., 2012, vol. 61, pp. 179–89.10.3323/jcorr.61.249 ↗
9. H.H. Johnson, J G. Morlet, and A.R. Troiano: Trans. Metall. Soc. AIME, 1958, vol. 212, pp. 528–36.
10. M. Wang, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2006, vol. 48, pp. 2189–2202.10.1016/j.corsci.2005.07.010 ↗
11. T. Doshida and K. Takai: Acta Mater., 2014, vol. 79, pp. 93–107.10.1016/j.actamat.2014.07.008 ↗
12. Y. Hagihara, T. Shobu, N Hisamori, H Suzuki, K Takai, and K Hirai: ISIJ Int., 2012, vol. 52, pp. 298–306.10.2355/isijinternational.52.298 ↗
13. S.Terasaki and K. Tsuzaki: CAMP-ISIJ, 2002, vol. 15, p. 1260.
14. Y. Matsumoto, K. Takai, M. Ichiba, T. Suzuki, T. Okamura, and S. Mizoguch: ISIJ Int., 2013, vol. 53, pp. 714–22.10.2355/isijinternational.53.714 ↗
15. Y.H. Kim and J.W. Morris: Metall. Trans. A, 1983, vol. 14A, pp. 1883–88.10.1007/BF02645559 ↗
16. M. Gao and R.P. Wei: Acta Metall., 1984, vol. 32, pp. 2115–24.10.1016/0001-6160(84)90190-1 ↗
17. A. Shibata, H. Takahashi, and N. Tsuji: ISIJ Int., 2012, vol. 52, pp. 208–12.10.2355/isijinternational.52.208 ↗
18. C.J. McMahon: Eng. Fract. Mech., 2001, vol. 68, pp. 773–88.10.1016/S0013-7944(00)00124-7 ↗
19. P. Novak, R. Yuan, B.P. Somerday, P. Sofronis, and R.O. Ritchie: J. Mech. Phys. Solids, 2010, vol. 58, pp. 206–26.10.1016/j.jmps.2009.10.005 ↗
20. M. Ichiba, K. Takai, J. Sakai: ISIJ Int., 2016, vol. 56, pp. 397–404.10.2355/isijinternational.ISIJINT-2015-288 ↗
21. C. San Marhi, T. Michler, K.A. Nibur, and B.P. Somerday: Int. J. Hydrogen Energy, 2010, vol. 35, pp. 9736–45.10.1016/j.ijhydene.2010.06.018 ↗
22. J.A. Donovan: Metall. Trans. A, 1976, vol. 7A, pp. 1677–83.10.1007/BF02817885 ↗
23. H. Shoda, H. Suzuki, K. Takai, and Y. Hagihara: ISIJ Int., 2010, vol. 50, pp. 115–23.10.2355/isijinternational.50.115 ↗
24. K. Takai, H. Shoda, H. Suzuki, and M. Nagumo: Acta Mater., 2008, vol. 56, pp. 5158–67.10.1016/j.actamat.2008.06.031 ↗
25. K. Sakaki, T. Kawase, M. Hirato, M. Mizumo, H. Araki, Y. Shirai, and M. Nagumo: Scripta Mater., 2006, vol. 55, pp. 1031–34.10.1016/j.scriptamat.2006.08.030 ↗
26. R. Gopaliengar, J.P. Wallace, and R.A. Oriani: Mater. Sci. Eng., 1985, vol. 68, pp. 191–96.10.1016/0025-5416(85)90408-2 ↗
27. A. Vehanen, P. Hautojärvi, J. Johansson, J. Yli-Kauppila, and P. Moser: Phys. Rev. B, 1982, vol. 25, pp. 762–80.10.1103/PhysRevB.25.762 ↗
28. T. Doshida, H. Suzuki, K. Takai, N. Oshima, and T. Hirade: ISIJ Int., 2012, vol. 52, pp. 198–207.10.2355/isijinternational.52.198 ↗
29. M. Hatano, M. Fujinami, K. Arai, H. Fujii, and M. Nagumo: Acta Mater., 2014, vol. 67, pp. 342–53.10.1016/j.actamat.2013.12.039 ↗
30. O. Madelen, I. Todoshchenko, Y. Yagodzinskyy, T. Saukkonen, H. Hänninen: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4742–47.
31. T. Doshida, M. Nakamura, H. Saito, T. Sawada, and K. Takai: Acta Mater., 2013, vol. 61, pp. 7755–66.10.1016/j.actamat.2013.09.015 ↗
32. H.K. Birnbaum and P. Sofronis: Mater. Sic. Eng. A, 1994, vol. A176, pp. 191–20210.1016/0921-5093(94)90975-X ↗
33. P. Sofronis and H.K. Birunbaum: J. Mech. Phys. Solids, 1995, vol. 43, pp. 49–90.10.1016/0022-5096(94)00056-B ↗
34. I.M. Robertson: Eng. Fract. Mech., 2001, vol. 68, 671–92.10.1016/S0013-7944(01)00011-X ↗
35. T. Tabata and H.K. Birumbaum, Scripta Metall., 1984. vol. 18, pp. 231–36.10.1016/0036-9748(84)90513-1 ↗
36. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Acta Mater., 2012, vol. 60, pp. 5182–89.10.1016/j.actamat.2012.06.040 ↗
37. M.L. Martin, J.A. Fenske, G.S. Liu, P. Sofronis, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–06.10.1016/j.actamat.2010.11.024 ↗