On the Mechanical Stability of Austenite Matrix After Martensite Formation in a Medium Mn Steel
Source abstract
Abstract
The present work employs the nanoindentation technique to investigate the effect of prior martensite formation on the mechanical stability of a retained austenite matrix. It is found that the small austenite grains that were surrounded by martensite laths have higher mechanical stability than the large austenite grains that were free of martensite laths. The higher mechanical stability of small austenite grains is due to its higher amount of defects resulting from the prior martensite formation. These defects act as barriers for the later martensite formation and therefore contribute to the higher mechanical stability of small austenite grains. As a result, the present work suggests that the formation of martensite tends to stabilize the surrounding austenite matrix. Therefore, it may explain the lower transformed amount of martensite after quenching as compared to the theoretical calculation using the Koistinen and Marburger (K–M) equation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
2. G. Krauss: Mater. Sci. Eng. A 1999, vol. 273, pp. 40–57.10.1016/S0921-5093(99)00288-9 ↗
3. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scripta Mater., 2010, vol. 63, pp. 815–8.10.1016/j.scriptamat.2010.06.023 ↗
4. P. Jacques, Q. Furnémont, A. Mertens, and F. Delannay: Philos. Mag. A, 2001, vol. 81, pp. 1789–812.10.1080/01418610108216637 ↗
5. B.B. He, H.W. Luo, and M.X. Huang: Int. J. Plast., 2016, vol. 78, pp. 173–86.10.1016/j.ijplas.2015.11.004 ↗
6. E. De Moor, S. Lacroix, A.J. Clarke, J. Penning, and J.G. Speer: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2586–95.10.1007/s11661-008-9609-z ↗
7. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
8. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor: Acta Mater., 2008, vol. 56, pp. 16–22.10.1016/j.actamat.2007.08.051 ↗
9. E.P. Bagliani, M.J. Santofimia, L. Zhao, J. Sietsma, and E. Anelli: Mater. Sci. Eng. A, 2013, vol. 559, pp. 486–95.10.1016/j.msea.2012.08.130 ↗
10. J. Mola and B.C. De Cooman: Scripta Mater., 2011, vol. 65, pp. 834–7.10.1016/j.scriptamat.2011.07.041 ↗
11. E.J. Seo, L. Cho, and B.C. De Cooman: Metall. Mater. Trans. A, 2015, vol. 46, pp. 27–31.10.1007/s11661-014-2657-7 ↗
12. H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1999, vol. 15, pp. 22–9.10.1179/026708399773002773 ↗
13. S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki: ISIJ Int., 2005, vol. 45, pp. 91–4.10.2355/isijinternational.45.91 ↗
14. B.B. He and M.X. Huang: Metall. Mater. Trans. A, 2015, vol. 46, pp. 688–94.10.1007/s11661-014-2681-7 ↗
15. B.B. He, M.X. Huang, Z.Y. Liang, A.H.W. Ngan, H.W. Luo, J. Shi, W.Q. Cao, and H. Dong: Scripta Mater., 2013, vol. 69, pp. 215–8.10.1016/j.scriptamat.2013.03.030 ↗
16. T.H. Ahn, C.S. Oh, D.H. Kim, K.H. Oh, H. Bei, E.P. Georg, and H.N. Han: Scripta Mater., 2010, vol. 63, pp. 540–3.10.1016/j.scriptamat.2010.05.024 ↗
17. Y. Kim, T.-H. Ahn, D.-W. Suh, and H.N. Han: Scripta Mater., 2015, vol. 104, pp. 13–6.10.1016/j.scriptamat.2015.03.014 ↗
18. S.Z. Wu, Z.Y. Liang, B.B. He, and M.X. Huang: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4731–6.10.1007/s11661-014-2467-y ↗
19. K. Sugimoto, B. Yu, Y. Mukai, and S. Ikeda: ISIJ Int., 2005, vol. 45, pp. 1194–200.10.2355/isijinternational.45.1194 ↗
20. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
21. J.B. Yang, M. Enomoto, and C. Zhang: Mater. Sci. Eng. A, 2006, vol. 422, pp. 232–40.10.1016/j.msea.2006.02.003 ↗
22. Z. Wang, X. Sun, Z. Yang, Q. Yong, C. Zhang, Z. Li, and Y. Weng: Mater. Sci. Eng. A, 2013, vol. 573, pp. 84–91.10.1016/j.msea.2013.02.056 ↗
23. P. Tao, C. Zhang, Z. Yang, and T. Hiroyuki: J. Iron Steel Res. Int., 2010, vol. 17, pp. 74–8.10.1016/S1006-706X(10)60103-3 ↗
24. K.L. Johnson: Contact Mechanics, Cambridge University Press, Cambridge, 1985.10.1017/CBO9781139171731 ↗
25. S. Shim, H. Bei, E.P. George, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–8.10.1016/j.scriptamat.2008.07.026 ↗
26. F. Lani, Q. Furnémont, T. Van Rompaey, F. Delannay, P.J. Jacques, and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 3695–705.10.1016/j.actamat.2007.02.015 ↗
27. A. Barnoush: Acta Mater., 2012, vol. 60, pp. 1268–77.10.1016/j.actamat.2011.11.034 ↗
28. W.A. Soer, K.E. Aifantis, and J.T.M. De Hosson: Acta Mater., 2005, vol. 53, pp. 4665–76.10.1016/j.actamat.2005.07.001 ↗
29. S. Zaefferer, J. Ohlert, and W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765–78.10.1016/j.actamat.2004.02.044 ↗
30. T. Ohmura, A.M. Minor, E.A. Stach, and J.W. Morris: J. Mater. Res., 2004, vol. 19, pp. 3626–32.10.1557/JMR.2004.0474 ↗
31. H. Sato and S. Zaefferer: Acta Mater., 2009, vol. 57, pp. 1931–7.10.1016/j.actamat.2008.12.035 ↗
32. S. Lee, S.J. Lee, and B.C. De Cooman: Scripta Mater., 2011, vol. 65, pp. 225–8.10.1016/j.scriptamat.2011.04.010 ↗
33. X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, and L. Wang: Scripta Mater., 2013, vol. 68, pp. 321–4.10.1016/j.scriptamat.2012.11.003 ↗
34. K.W. Andrews: J. Iron Steel Inst. Jpn., 1965, vol. 203, pp. 721–7.
35. J.H. Ryu, D. Kim, H.S. Kim, H.K.D.H. Bhadeshia, and D.W. Suh: Scripta Mater., 2010, vol. 63, pp. 297–9.10.1016/j.scriptamat.2010.04.020 ↗
36. S. Chatterjee, H.S. Wang, J.R. Yang, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 641–4.10.1179/174328406X86128 ↗
37. W. Jäniche, W. Dahl, H.-F. Klärner, W. Pitsch, D. Schauwinhold, W. Schlüter, H. Schmitz, and V.D. Eisenhüttenleute: Werkstoffkunde Stahl: Band 1: Grundlagen, Springer, Berlin, 2013.
38. H.K.D.H. Bhadeshia and R. Honeycombe: Steels: Microstructure and Properties. 3rd ed., Butterworth-Heinemann, Oxford, 2006.
39. G.W. Greenwood and R.H. Johnson: Proc. Roy. Soc. London A, 1965, vol. 283, pp. 403–22.10.1098/rspa.1965.0029 ↗
40. L. Taleb and F. Sidoroff: Int. J. Plast., 2003, vol. 19, pp. 1821–42.10.1016/S0749-6419(03)00020-2 ↗
41. M. Villa, K. Pantleon, and M.A.J. Somers: Acta Mater., 2014, vol. 65, pp. 383–92.10.1016/j.actamat.2013.11.007 ↗
42. M. Maalekian, E. Kozeschnik, S. Chatterjee, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2007, vol. 23, pp. 610–2.10.1179/174328407X158686 ↗
43. D.P Koistinen and R.E Marburger: Acta Mater., 1959, pp. 55–69.10.1111/j.1360-0443.1959.tb05462.x ↗
44. B. Mintz: Proc. International Conference on TRIP-Aided High Strength Ferrous Alloys, Ghent, 2002, pp. 379–82.
45. R.W. Neu and H. Sehitoglu: ASTM Special Technical Publication 1994, pp. 581–97.10.1520/STP13972S ↗