Evolution of Microstructure and Texture During Warm Rolling of a Duplex Steel
Source abstract
Abstract
The effect of warm rolling on the evolution of microstructure and texture in a duplex stainless steel (DSS) was investigated. For this purpose, a DSS steel was warm rolled up to 90 pct reduction in thickness at 498 K, 698 K, and 898 K (225 °C, 425 °C, and 625 °C). The microstructure with an alternate arrangement of deformed ferrite and austenite bands was observed after warm rolling; however, the microstructure after 90 pct warm rolling at 498 K and 898 K (225 °C and 625 °C) was more lamellar and uniform as compared to the rather fragmented and inhomogeneous structure observed after 90 pct warm rolling at 698 K (425 °C). The texture of ferrite in warm-rolled DSS was characterized by the presence of the RD (〈011〉//RD) and ND (〈111〉//ND) fibers. However, the texture of ferrite in DSS warm rolled at 698 K (425 °C) was distinctly different having much higher fraction of the RD-fiber components than that of the ND-fiber components. The texture and microstructural differences in ferrite in DSS warm rolled at different temperatures could be explained by the interaction of carbon atoms with dislocations. In contrast, the austenite in DSS warm rolled at different temperatures consistently showed pure metal- or copper-type deformation texture which was attributed to the increase in stacking fault energy at the warm-rolling temperatures. It was concluded that the evolution of microstructure and texture of the two constituent phases in DSS was greatly affected by the temperature of warm rolling, but not significantly by the presence of the other phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. J. Keichel, J. Foct, G. Gottstein, ISIJ Int., 2003, vol. 43, pp. 1788-94.10.2355/isijinternational.43.1788 ↗
2. J. Keichel, J. Foct, G. Gottstein, ISIJ Int., 2003, vol. 43, pp. 1781-87.10.2355/isijinternational.43.1781 ↗
3. J. Keichel, G. Gottstein, and J. Foct: High Nitrogen Steels '98, 1999, vol. 318–23, pp. 785–91.10.4028/www.scientific.net/MSF.318-320.785 ↗
4. A. Belyakov, Y. Kimura, K. Tsuzaki, Acta Mater., 2006, vol. 54, pp. 2521-32.10.1016/j.actamat.2006.01.035 ↗
5. M. Blicharski, J. Jura, T. Baudin, R. Penelle, J. Bonarski, M. Kowalski, Arch. Metall. Mater., 2005, vol. 50, pp. 495-502.
6. K.E. Cooke, S. Yang, C. Selcuk, A. Kennedy, D.G. Teer, D. Beale, Surf. Coat. Technol., 2004, vol. 188, pp. 697-702.10.1016/j.surfcoat.2004.07.003 ↗
7. J. Rys, W. Ratuszek, Appl. Cryst. XXI, 2010, vol. 163, pp. 145-50.
8. J. Ryś, A. Zielińska-Lipiec, Arch. Metall. Mater., 2012, vol. 57, pp. 1041-53.10.2478/v10172-012-0116-2 ↗
9. J. Rys, M. Witkowska, Appl. Cryst. XXI, 2010, vol. 163, pp. 151-56.
10. J. Hamada, N. Ono, Mater. Trans., 2010, vol. 51, pp. 635-43.10.2320/matertrans.MG200907 ↗
11. J. Rys, W. Ratuszek, M. Witkowska, Arch. Metall. Mater., 2005, vol. 50, pp. 857-70.
12. J. Rys, W. Ratuszek, M. Witkowska, Appl. Cryst. XX, 2007, vol. 130, pp. 57-62.
13. M.R. Toroghinejad, A.O. Humphreys, F. Ashrafizadeh, A. Najafizadeh, J.J. Jonas, Mater. Sci. Forum, 2003, vol. 426-4, pp. 3691-96.10.4028/www.scientific.net/MSF.426-432.3691 ↗
14. R.K. Ray, A. Haldar, Mater. Manuf. Process., 2002, vol. 17, pp. 715-29.10.1081/AMP-120016093 ↗
15. M.R. Barnett, J.J. Jonas, ISIJ Int., 1999, vol. 39, pp. 856-73.10.2355/isijinternational.39.856 ↗
16. A. Belyakov, R. Kaibyshev, Y. Kimura, K. Tsuzaki, Mater. Sci. Forum, 2010, vol. 638-42 pp. 1905-10.10.4028/www.scientific.net/MSF.638-642.1905 ↗
17. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004.
18. H.J. Bunge: Mathernatische Methoden der Texturanalyse, Academic Press, Berlin, 1969.
19. X.L. Li, W. Liu, A. Godfrey, D.J. Jensen, Q. Liu, Acta Mater., 2007, vol. 55, pp. 3531-40.10.1016/j.actamat.2007.02.005 ↗
20. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., New York, NY, 1976.
21. S. Hereñú, I. Alvarez-Armas, A.F. Armas, Scripta Mater., 2001, vol. 45, pp. 739-45.10.1016/S1359-6462(01)01088-0 ↗
22. D.A. Hughes, N. Hansen, Acta Mater., 1997, vol. 45, pp. 3871-86.10.1016/S1359-6454(97)00027-X ↗
23. D.A. Hughes, N. Hansen, Philos. Mag., 2003, vol. 83, pp. 3871-93.10.1080/14786430310001605560 ↗
24. R. Kolmorgen, H. Biermann, Int. J. Fatigue, 2012, vol. 37, pp. 86-91.10.1016/j.ijfatigue.2011.10.005 ↗
25. T. Leffers, R.K. Ray, Prog. Mater. Sci., 2009, vol. 54, pp. 351-96.10.1016/j.pmatsci.2008.09.002 ↗
26. R.K. Ray, Acta Metall. Mater., 1995, vol. 43, 3861-72.10.1016/0956-7151(95)90169-8 ↗
27. G. Wassermann, J. Grewen, Texturen Metallisclzer Werkstoffe, Springer, Berlin, 1962.10.1007/978-3-662-13128-2 ↗
28. P.C.J. Gallagher, Metall. Trans., 1970, vol. 1, pp. 2429-61.10.1007/BF03038370 ↗
29. R.M. Latanision, A.W. Ruff, Metall Trans., 1971, vol. 2, pp. 505-09.10.1007/BF02663341 ↗
30. R.E. Smallman, D. Green, Acta Metall., 1964, vol. 12, pp. 145-54.10.1016/0001-6160(64)90182-8 ↗
31. R. Saha, R.K. Ray, J. Mater. Sci., 2007, vol. 42, pp. 9548-52.10.1007/s10853-007-1753-0 ↗
32. M.R. Barnett, J.J. Jonas, ISIJ Int., 1997, vol. 37, pp. 697-705.10.2355/isijinternational.37.697 ↗
33. T. Senuma, H. Yada, R. Shimizu, J. Harase, Acta Metall. Mater., 1980, vol. 38, pp. 2673-81.10.1016/0956-7151(90)90281-K ↗
34. J.L. Raphanel, P. Van Houtte, Acta Metall., 1985, vol. 33, pp. 1481-88.10.1016/0001-6160(85)90049-5 ↗