Numerical Analysis of Heat Transfer Characteristics in Microwave Heating of Magnetic Dielectrics
Source abstract
Abstract
A numerical simulation of heat transfer during the microwave heating process of magnetite, which is a two-dimensional (2-D) magnetic dielectric, subjected to heat conduction, convection, and radiation was performed. The heat transfer process was modeled using an explicit finite-difference approach, and the temperature profiles for different heating parameters were generated through developing a code in Mathematica 7.0 (Wolfram Research, Inc., Champaign, IL). The temperature in the sample increases rapidly in 1 minute and nonuniform temperature distribution inside the object is observed. An obvious temperature hot spot is formed in the corner of the predicted temperature profile initially, which shifts to the center of the object as heating power increases. Microwave heating at 915 MHz exhibits better heating uniformity than 2450 MHz mainly because of the larger microwave penetration depth. It is also observed that the heating homogeneity in the object can be improved by reducing the dimension of object. The effects of heating time, microwave power, microwave frequency, and object dimension need to be considered to obtain high heating performance and avoid/minimize thermal runaway resulting from temperature nonuniformity in large-scale microwave heating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Induction Heating and Inverter Technology · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. D.E. Clark, D.C. Folz, and J.K. West: Mater. Sci. Eng. A, 2000, vol. 287, pp. 153–58.10.1016/S0921-5093(00)00768-1 ↗
2. X. Liao, J. Zhu, and H. Chen: Mater. Sci. Eng. B, 2001, vol. 85, pp. 85–89.10.1016/S0921-5107(01)00647-X ↗
3. D. Adam: Nature, 2003, vol. 421, pp. 571–72.10.1038/421571a ↗
4. R. Subasri: Mater. Sci. Eng. B, 2004, vol. 112, pp. 73–78.10.1016/j.mseb.2004.06.005 ↗
5. S.S. Panda, A. Upadhyaya, and D. Agrawal: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2253–64.10.1007/BF02586144 ↗
6. G. Xie, S. Li, D.V. Louzguine-Luzgin, Z. Cao, N. Yoshikawa, M. Sato, and A. Inoue: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1714–19.10.1007/s11661-009-0028-6 ↗
7. M. Saitoh, T. Yamamoto, H. Okino, and M. Kobayashi: Mater. Res. Innovat., 2002, vol. 5, pp. 208–13.10.1007/s10019-002-0176-4 ↗
8. L.A. Ramajo, A.A. Cristóbal, P.M. Botta, J.M. Porto López, M.M. Reboredo, and M.S. Castro: Compos. Part A-Appl. S, 2009, vol. 40, pp. 388–93.10.1016/j.compositesa.2008.12.017 ↗
9. Y. Wang: Ph.D. Dissertation, Michigan Technological University, Houghton, MI, 2005.
10. J.Y. Hwang, X. Huang, S. Qu, Y. Wang, S. Shi, and G. Caneba: EPD Cong. Proc., TMS Publications, San Antonio, TX, 2006, pp. 219–27.
11. S.L. McGill, J.W. Walkiewicz, and G.A. Smyres: Mater. Res. Symp. Proc., Reno, NV, 1988, pp. 247–52.
12. K.G. Ayappa, H.T. Davis, E.A. Davis, and J. Gordon: AIChE J., 1991, vol. 37, pp. 313–22.10.1002/aic.690370302 ↗
13. L. Zhou, V.M. Puri, R.C. Anantheswaran, and G. Yeh: J. Food Eng., 1995, vol. 25, pp. 509–29.10.1016/0260-8774(94)00032-5 ↗
14. Y.E. Lin, R.C. Anantheswaran, and V.M. Puri: J. Food Eng., 1995, vol. 25, pp. 85–112.10.1016/0260-8774(94)00008-W ↗
15. S.A. Barringer, E.A. Davis, J. Gordon, K.G. Ayappa, and H.T. Davis: J. Food Sci., 1995, vol. 60, pp. 1137–42.10.1111/j.1365-2621.1995.tb06309.x ↗
16. D. Acierno, A.A. Barba, and M. d’Amore: Heat Mass Trans., 2004, vol. 40, pp. 413–20.10.1007/s00231-003-0482-4 ↗
17. L.A. Campanone and N.E. Zaritzky: J. Food Eng., 2005, vol. 69, pp. 359–68.10.1016/j.jfoodeng.2004.08.027 ↗
18. R. Vadivambal and D.S. Jayas: Food Bioprocess Tech., 2010, vol. 3, pp. 161–71.10.1007/s11947-008-0136-0 ↗
19. H. Chen, J. Tang, and F. Liu: J. Food Eng., 2008, vol. 88, pp. 294–305.10.1016/j.jfoodeng.2008.02.020 ↗
20. H.W. So and A. Taube: Polym. Eng. Sci., 2004, vol. 44, pp. 728–35.10.1002/pen.20065 ↗
21. P. Mishra, A. Upadhyaya, and G. Sethi: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 839–45.10.1007/s11663-006-0066-z ↗
22. P. Rattanadecho: Chem. Eng. Sci. 2006, vol. 61, pp. 4798–4811.10.1016/j.ces.2006.03.001 ↗
23. P.V. Kozlov, I.R. Rafatov, E.B. Kulumbaev, and V.M. Lelevkin: J. Phys. D-Appl. Phys., 2007, vol. 40, pp. 2927–35.10.1088/0022-3727/40/9/039 ↗
24. N. Standish and W. Huang: ISIJ Int., 1991, vol. 31, pp. 241–45.10.2355/isijinternational.31.241 ↗
25. J.Y. Hwang and X. Huang: Advanced Processing of Metals And Materials (TMS Sohn International Symposium), vol. 5, San Diego, CA, 2006, pp. 251–61.
26. C. Bai, W. Ren, G. Qiu, M. Hu, D. Chen, and L. Wen: ISIJ Int., 2007, vol. 47, pp. 528–32.10.2355/isijinternational.47.528 ↗
27. K. Ishizaki and K. Nagata: ISIJ Int., 2007, vol. 47, pp. 811–16.10.2355/isijinternational.47.811 ↗
28. K. Ishizaki, K. Nagata, and T. Hayashi: ISIJ Int., 2007, vol. 47, pp. 817–22.10.2355/isijinternational.47.817 ↗
29. K. Ishizaki and K. Nagata: ISIJ Int., 2008, vol. 48, pp. 1159–64.10.2355/isijinternational.48.1159 ↗
30. K.G. Ayappa, H.T. Davis, G. Crapiste, E.A. Davis, and J. Gordon: Chem. Eng. Sci., 1991, vol. 46, pp. 1005–16.10.1016/0009-2509(91)85093-D ↗
31. S. Chatterjee, T. Basak, and S.K. Das: J. Food Eng., 2007, vol. 79, pp. 1269–79.10.1016/j.jfoodeng.2006.04.039 ↗
32. T. Korhonen and P. Tavi: Simulat. Model Pract. Theor., 2008, vol. 16, pp. 639–44.10.1016/j.simpat.2008.03.007 ↗
33. M.M. Hussain and I. Dincer: Numer Heat Tr. A-Appl., 2003, vol. 43, pp. 867–78.10.1080/713838150 ↗
34. J. Molgaard and W.W. Smeltzer: J. Appl. Phys., 1971, vol. 42, pp. 3644–47.10.1063/1.1660785 ↗
35. E. Westrum Jr. and F. Grønvold: J. Chem. Thermodyn., 1969, vol. 1, pp. 543–57.10.1016/0021-9614(69)90015-9 ↗
36. Z. Peng, J.Y. Hwang, J. Mouris, R. Hutcheon, and X. Huang, ISIJ Int., 2010, vol. 50, pp. 1590–96.10.2355/isijinternational.50.1590 ↗
37. A.L. Sprague, T.L. Roush, R.T. Downs, and K. Righter: Icarus, 2000, vol. 143, pp. 409–11.10.1006/icar.1999.6280 ↗
38. W.H. Sutton: Ceram. Bull., 1989, vol. 68, pp. 376–84.
39. D. Agrawal: Trans. Indian Ceram. Soc., 2006, vol. 65, pp. 129–44.10.1080/0371750X.2006.11012292 ↗
40. S. Das, A.K. Mukhopadhyay, S. Datta, and D. Basu: Bull. Mater. Sci., 2009, vol. 32, pp. 1–13.10.1007/s12034-009-0001-4 ↗