journal article·2015-11

Texture Evolution of a Non-oriented Electrical Steel Cold Rolled at Directions Different from the Hot Rolling Direction

Youliang He, Erik Hilinski, Jian Li

Publisher page

Abstract

With the objective of optimizing the crystallographic texture of non-oriented electrical steel, i.e., reducing the 〈111〉//ND and 〈110〉//RD fibers and promoting the 〈001〉//ND texture, a new rolling scheme was proposed and tested, in which the cold rolling direction (CRD) was intentionally inclined at an angle to the hot rolling direction (HRD) in order to change the orientation flow paths during cold rolling and alter the final texture of the annealed sheets. A non-oriented electrical steel containing 0.88 wt pct Si was hot rolled using conventional routes and annealed, and a number of rectangular plates were cut from the hot band with the longitudinal directions inclined at various angles, i.e., 0, 15, 30, 45, 60, 75, and 90 deg, to the HRD. These plates were then cold rolled along the longitudinal directions with a thickness reduction of 72 pct. The cold-rolled samples were annealed, temper rolled and annealed again (final annealing). The texture evolution during hot rolling, hot band annealing, cold rolling, and final annealing was characterized by electron backscatter diffraction and X-ray diffraction techniques. By changing the CRD with respect to the HRD, the initial texture and the orientation flow paths were altered, which resulted in apparent differences in the textures as compared to conventional cold rolling. After temper rolling and final annealing, the recrystallization textures consisted of mainly a 〈001〉//ND fiber and there was almost no 〈111〉//ND fiber. The sample cold rolled at an angle of 60 deg to the HRD had the strongest texture (intensity almost 2× of conventional rolling) with a maximum at the cube {001}〈100〉 orientation—a magnetically favorable orientation for non-oriented electrical steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. F.J.G. Landgraf: JOM, 2012, vol. 64, pp. 764-71.10.1007/s11837-012-0356-7 ↗
2. M. Getzlaff: Fundamentals of Magnetism, Springer, Berlin, 2008.
3. T. Tomida, S. Uenoya and N. Sano: Mater. Trans., 2003, vol. 44, pp. 1106-15.10.2320/matertrans.44.1106 ↗
4. Kestens L, Jonas JJ (2005) ASM Handbook, vol. 14, Part 1. ASM International, Materials Park, pp 685-700.
5. W.C. Jeong: Mater. Lett., 2008, vol. 62, pp. 91-94.10.1016/j.matlet.2007.04.081 ↗
6. B. Hutchinson, L. Ryde and K. Tagashira: Mater. Sci. Eng., A, 1998, vol. A257, pp. 9-17.10.1016/S0921-5093(98)00820-X ↗
7. J.J. Sidor, K. Verbeken, E. Gomes, J. Schneider, P.R. Calvillo and L.A.I. Kestens: Mater. Charact., 2012, vol. 71, pp. 49-57.10.1016/j.matchar.2012.06.006 ↗
8. H. Yashiki and T. Kaneko: J. Magn. Magn. Mater., 1992, vol. 112, pp. 200-202.10.1016/0304-8853(92)91152-J ↗
9. O. Fischer and J. Schneider: J. Magn. Magn. Mater., 2003, vol. 254-255, pp. 302-306.10.1016/S0304-8853(02)00965-4 ↗
10. S. Akta, G.J. Richardson and C.M. Sellars: ISIJ Int., 2005, vol. 45, pp. 1666-75.10.2355/isijinternational.45.1666 ↗
11. M. Takashima, M. Komatsubara, and N. Morito: ISIJ Int., 1997, vol. 37, pp. 1263-68.10.2355/isijinternational.37.1263 ↗
12. E.J. Gutierrez-Castaneda and A. Salinas-Rodriguez: J. Magn. Magn. Mater. 2011, vol. 323, pp. 2524-30.10.1016/j.jmmm.2011.05.039 ↗
13. J. Park, J.A. Szpunar and S.Y. Cha: ISIJ Int., 2003, vol. 43, pp. 1611-14.10.2355/isijinternational.43.1611 ↗
14. Y. Sidor, F. Kovac and T. Kvackaj: Acta Mater. 2007, vol. 55, pp. 1711-22.10.1016/j.actamat.2006.10.032 ↗
15. T. Tomida and T. Tanaka: ISIJ Int., 1995, vol. 35, pp. 548-56.10.2355/isijinternational.35.548 ↗
16. T. Nakayama, N. Honjou, T. Minaga and H. Yashiki: J. Magn. Magn. Mater., 2001, vol. 234, pp. 55-61.10.1016/S0304-8853(01)00208-6 ↗
17. M. de Campos, F.J.G. Landgraf, I.G.S. Falleiros and G.C. Fronzaglia: ISIJ Int., 2004, vol. 44, pp. 1733-37.10.2355/isijinternational.44.1733 ↗
18. M.A. da Cunha and S.C. Paolinelli: Mater. Res., 2002, vol. 5, pp. 373-78.10.1590/S1516-14392002000300024 ↗
19. L. Kestens and S. Jacobs: Texture Stress Microstruct., vol. 2008, Article ID: 173083, pp. 1-9.10.1155/2008/173083 ↗
20. Y. Hayakawa and M. Kurosawa: Acta Mater., 2002, vol. 50, pp. 4527-34.10.1016/S1359-6454(02)00271-9 ↗
21. Vander Voort GF (1999) Metallography Principles and Practice. ASM International, Materials Park, pp 447-53.
22. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024-37.10.1107/S0021889808030112 ↗
23. J. Hunady, M. Cernik, E.J. Hilinski, M. Predmersky and A. Magurova: J. Magn. Magn. Mater., 2006, vol. 304, pp. e620-23.10.1016/j.jmmm.2006.02.213 ↗
24. A.D. Rollett and S.I. Wright: Typical Textures in Metals, Cambridge University Press, Cambridge, 1998, pp. 179-237.
25. E. Aernoudt, P. Van Houtte and T. Leffers: Deformation and Textures of Metals at Large Strain, John Wiley & Sons Canada Ltd., Toronto, 1992, pp. 89-136.
26. L.S. Toth, J.J. Jonas, D. Daniel and R.K. Ray: Metall. Trans. A, 1990, vol. 21A, pp. 2985-3000.10.1007/BF02647219 ↗
27. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd, Oxford, 2004.
28. S.K. Chang and W.Y. Huang: ISIJ Int., 2005, vol. 45, pp. 918-22.10.2355/isijinternational.45.918 ↗
29. I.L. Dillamore and W.T. Roberts: Metall. Rev., 1965, vol. 10, pp. 271-380.10.1179/095066065790138348 ↗
30. C.G. Dunn and J.L. Walter: Trans. Metall. Soc. AIME, 1962, vol. 224, pp. 518-33.
31. N. Zhang, P. Yang, and W.M. Mao: Mater. Lett., 2013, vol. 93, pp. 363-65.10.1016/j.matlet.2012.11.132 ↗
32. F. Kovac, M. Dzubinsky, and Y. Sidor: J. Magn. Magn. Mater., 2004, vol. 269, pp. 333-40.10.1016/S0304-8853(03)00628-0 ↗
33. T. Tomida: J. Appl. Phys., 1996, vol. 79, pp. 5443-45.10.1063/1.362332 ↗
34. Y.H. Sha, C. Sun, F. Zhang, D. Patel, X. Chen, S.R. Kalidindi and L. Zuo: Acta Mater., 2014, vol. 76, pp. 106-17.10.1016/j.actamat.2014.05.020 ↗
35. P.K. Koh and G.C. Dunn: Trans. Met. Soc. AIME, 1955, vol. 203, pp. 401-405.
36. T. Taoka, E. Furubayashi and S. Takeuchi: Trans. Iron Steel Inst. Jpn., 1966, vol. 6, pp. 201-32.10.2355/isijinternational1966.6.290 ↗
37. H. Inagaki and T. Suda: Texture, 1972, vol. 1, pp. 129-40.10.1155/TSM.1.129 ↗
38. R. G. Aspden: Trans. Met. Soc. AIME, 1959, vol. 215, pp. 986-91.