Austenite Grain Growth and Precipitate Evolution in a Carburizing Steel with Combined Niobium and Molybdenum Additions
Source abstract
Abstract
Austenite grain growth and microalloy precipitate size and composition evolution during thermal processing were investigated in a carburizing steel containing various additions of niobium and molybdenum. Molybdenum delayed the onset of abnormal austenite grain growth and reduced the coarsening of niobium-rich precipitates during isothermal soaking at 1323 K, 1373 K, and 1423 K (1050 °C, 1100 °C, and 1150 °C). Possible mechanisms for the retardation of niobium-rich precipitate coarsening in austenite due to molybdenum are considered. The amount of Nb in solution and in precipitates at 1373 K (1100 °C) did not vary over the holding times evaluated. In contrast, the amount of molybdenum in (Nb,Mo)C precipitates decreased with time, due to rejection of Mo into austenite and/or dissolution of fine Mo-rich precipitates. In hot-rolled alloys, soaking in the austenite regime resulted in coarsening of the niobium-rich precipitates at a rate that exceeded that predicted by the Lifshitz-Slyozov-Wagner relation for volume-diffusion-controlled coarsening. This behavior is attributed to an initial bimodal precipitate size distribution in hot-rolled alloys that results in accelerated coarsening rates during soaking. Modification of the initial precipitate size distribution by thermal processing significantly lowered precipitate coarsening rates during soaking and delayed the associated onset of abnormal austenite grain growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. J.P. Wise, D.K. Matlock, and G. Krauss: in Heat Treating: Proceedings of the 20th Conference, K. Funatani and G. E. Totten, eds., ASM International, Metals Park, OH, 2001, pp. 1152–61.
2. L. J. Cuddy and J. C. Raley: Metallurgical Transactions A, 1983, vol. 14A, pp. 1989–95.10.1007/BF02662366 ↗
3. T. Gladman: Grain Size Control, Maney Publishing, London, 2004.
4. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Institute of Materials, London, 1997.
5. A. J. DeArdo: International Materials Review, 2003, vol. 48, pp. 371–402.10.1179/095066003225008833 ↗
6. K.A. AlOgab, D.A. Matlock, and J.G. Speer: in New Developments on Metallurgy and Applications of High Strength Steels, T. Perez, ed., Tenaris, Ternium, and Argentina, Association of Materials, Buenos Aires, Argentina, 2008, p. 14.
7. K. A. AlOgab, D. K. Matlock, J. G. Speer, and H. J. Kleebe: ISIJ International, 2007, vol. 47, pp. 307–16.10.2355/isijinternational.47.307 ↗
8. T. Murakami, H. Hatano, Y. Shindo, M. Nagahama, and H. Yaguchi: Materials Science Forum, 2007, vol. 539-543, pp. 4167–72.10.4028/www.scientific.net/MSF.539-543.4167 ↗
9. T. Murakami, H. Hitoshi, and H. Yaguchi: in Proceedings of the International Conference on New Developments in Long and Forged Products: Metallurgy and Applications, J.G. Speer, E.B. Damm, and C.V. Darragh, eds., AIST, Warrendale, PA, 2006, pp. 99–106.
10. L. Ratke and P. W. Voorhees: Growth and Coarsening: Ostwald Ripening in Material Processing, 1st ed., Springer, New York, 2002.10.1007/978-3-662-04884-9 ↗
11. D. Sanmartín, F. G. Caballero, C. Capdevila, and C. García de Andrés: Materials Science Forum, 2005, vol. 500–501, pp. 703–10.10.4028/www.scientific.net/MSF.500-501.703 ↗
12. H. Zou and J. S. Kirkaldy: Metallurgical Transactions A, 1991, vol. 22A, pp. 1511–24.10.1007/BF02667365 ↗
13. M. G. Akben, B. Bacroix, and J. J. Jonas: Acta Metallurgica, 1983, vol. 31, pp. 161–74.10.1016/0001-6160(83)90076-7 ↗
14. W. B. Lee, S. G. Hong, C. G. Park, and S. H. Park: Metallurgical and Materials Transactions A, 2002, vol. 33A, pp. 1689–98.10.1007/s11661-002-0178-2 ↗
15. S. Kurokawa, E. Ruzzante, A. M. Hey, and F. Dyment: Metal Science, 1983, vol. 17, pp. 433–38.10.1179/030634583790420628 ↗
16. Nerea Isasti, Denis Jorge-Badiola, Mitra L. Taheri, and Pello Uranga: Metallurgical and Materials Transactions A, 2014, vol. 45, pp. 4960–71.10.1007/s11661-014-2450-7 ↗
17. F. G. Wilson and T. Gladman: International Materials Review, 1988, vol. 33, pp. 221–86.10.1179/imr.1988.33.1.221 ↗
18. S S Hansen, J B Vandersande, and M Cohen: Metallurgical Transactions A, 1980, vol. 11A, pp. 387–402.10.1007/BF02654563 ↗
19. J. G. Speer and S. S. Hansen: Metallurgical Transactions A, 1989, vol. 20A, pp. 25–38.10.1007/BF02647491 ↗
20. E. J. Palmiere, C. I. Garcia, and A. J. DeArdo: Metallurgical and Materials Transactions A, 1994, vol. 25A, pp. 277–86.10.1007/BF02647973 ↗
21. D. Sanmartin, F. G. Caballero, C. Capdevila, and C. G. de Andres: Materials Transactions, 2004, vol. 45, pp. 2797–2804.10.2320/matertrans.45.2797 ↗
22. K. A. AlOgab, D. K. Matlock, J. G. Speer, and H. J. Kleebe: ISIJ International, 2007, vol. 47, pp. 1034–41.10.2355/isijinternational.47.1034 ↗
23. R.E. Thompson, D.K. Matlock, and J.G. Speer: Journal of Materials and Manufacturing, 2007, vol. 116, pp. 392–407.
24. T. Murakami, H. Hitoshi, and H. Yaguchi: Tetsu-to-Hagane, 2006, vol. 92, pp. 38–46.10.2355/tetsutohagane1955.92.7_448 ↗
25. M. J. Cancio, G. Echaniz, and T. E. Perez: Steel Research, 2002, vol. 73, pp. 340–46.10.1002/srin.200200219 ↗
26. M Charleux, W J Poole, M Militzer, and A Deschamps: Metallurgical and Materials Transactions A, 2001, vol. 32A, pp. 1635–47.10.1007/s11661-001-0142-6 ↗
27. A. J. Craven, K. He, L. A. J. Garvie, and T. N. Baker: Acta Materialia, 2000, vol. 48, pp. 3857–68.10.1016/S1359-6454(00)00194-4 ↗
28. H. Zou and J. S. Kirkaldy: Metallurgical Transactions A, 1992, vol. 23A, pp. 651–57.10.1007/BF02801182 ↗
29. R.D.K. Misra, K.K. Tenneti, G.C. Weatherly, and G. Tither: Metallurgical and Materials Transactions, 2003, vol. 34A, pp. 2341–51.10.1007/s11661-003-0297-4 ↗
30. W. Wang and H. R. Wang: Materials Letters, 2007, vol. 61, pp. 2227–30.10.1016/j.matlet.2006.08.052 ↗
31. S. G. Hong, K. B. Kang, and C. G. Park: Scripta Materialia, 2002, vol. 46, pp. 163–68.10.1016/S1359-6462(01)01214-3 ↗
32. Erik J Pavlina: Colorado School of Mines, 2011.
33. S. Okaguchi and T. Hashimoto: Transactions ISIJ, 1987, vol. 27, pp. 467–73.10.2355/isijinternational1966.27.467 ↗
34. R. M. Poths, R. L. Higginson, and E. J. Palmiere: Scripta Materialia, 2001, vol. 44, pp. 147–51.10.1016/S1359-6462(00)00617-5 ↗
35. K. Junhua, Z. Lin, G. Bin, L. Pinghe, W. Aihua, and X. Changsheng: Materials & Design, 2004, vol. 25, pp. 723–28.10.1016/j.matdes.2004.03.009 ↗
36. Z. Tang and W. Stumpf: Materials Characterization, 2008, vol. 59, pp. 717–28.10.1016/j.matchar.2007.06.001 ↗
37. G. Krauss: Steels: Processing, Structure, And Performance, 3rd ed., ASM International, Metals Park, Ohio, 2005.
38. M G Akben, I Weiss, and J J Jonas: Acta Metallurgica, 1981, vol. 29, pp. 111–21.10.1016/0001-6160(81)90092-4 ↗
39. J. D. L’Ecuyer, D. L’Esperance, M. G. Akben, and B. Bacroix: Acta Metallurgica, 1987, vol. 35, pp. 1149–58.10.1016/0001-6160(87)90062-9 ↗
40. R. Uemori, R. Chijiiwa, H. Tamehiro, and H. Morikawa: Applied Surface Science, 1994, vol. 76/77, pp. 255–60.10.1016/0169-4332(94)90351-4 ↗
41. D.C. Houghton, G.C. Weatherly, and J.D. Embury: in Thermomechanical Processing of Microalloyed Austenite, A.J. DeArdo, G.A. Ratz, and P.J. Wray, eds., AIME, Pittsburg, 1982, pp. 267–92.
42. J.G. Speer, R.W. Regier, D.K. Matlock, and S.G. Jansto: in Proceedings, New Developments on Metallurgy and Applications of High Strength Steels, T. Perez, ed., Tenaris, Ternium, and Argentina Association of Materials, Buenos Aires, Argentina, 2008, p. 13.
43. C.M. Enloe, K.O. Findley, C.M. Parish, M.K. Miller, B.C. De Cooman, and J.G. Speer: Scripta Materialia, 2013, vol. 68, pp. 55–58.10.1016/j.scriptamat.2012.09.027 ↗
44. W. B. Lee, S. G. Hong, C. G. Park, K. H. Kim, and S. H. Park: Scripta Materialia, 2000, vol. 43, pp. 319–24.10.1016/S1359-6462(00)00411-5 ↗
45. S. Kanazawa, A. Nakashima, K. Okamoto, K. Tanabe, and S. Nakazawa: Transactions of the Japan Institute of Metals, 1967, vol. 8, pp. 105–12.10.2320/matertrans1960.8.105 ↗
46. S. Kanazawa, A. Nakashima, K. Okamoto, K. Tanabe, and S. Nakazawa: Transactions of the Japan Institute of Metals, 1967, vol. 8, pp. 113–20.10.2320/matertrans1960.8.113 ↗
47. A. Ghosh, S. Das, and S. Chatterjee: Materials Science and Technology, 2005, vol. 21, pp. 325–33.10.1179/174328405X27043 ↗
48. S. Q. Yuan, G. L. Liang, and X. J. Zhang: Journal of Iron and Steel Research, International, 2010, vol. 17, pp. 60–63.10.1016/S1006-706X(10)60143-4 ↗
49. K. Tomita, Y. Funakawa, T. Shiozaki, E. Maeda, and T. Yamamoto: Materia Japan, 2003, vol. 42, pp. 70–72.10.2320/materia.42.70 ↗
50. K. Seto, Y. Funukawa, and S. Kaneko: JFE Technical Report, 2007, pp. 19–25.10.1300/J124v25n02_02 ↗
51. Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto, and E. Maeda: ISIJ International, 2004, vol. 44, pp. 1945–51.10.2355/isijinternational.44.1945 ↗
52. I. B. Timokhina, P. D. Hodgson, S. P. Ringer, R. K. Zheng, and E. V. Pereloma: Materials Science Forum, 2007, vol. 561-565, pp. 2083–86.10.4028/www.scientific.net/MSF.561-565.2083 ↗
53. C. Y. Chen, H. W. Yen, F. H. Kao, W. C. Li, C. Y. Huang, J. R. Yang, and S. H. Wang: Materials Science and Engineering A, 2009, vol. 499, pp. 162–66.10.1016/j.msea.2007.11.110 ↗
54. J. H. Jang, C. H. Lee, Y. U. Heo, and D. W. Suh: Acta Materialia, 2012, vol. 60, pp. 208–17.10.1016/j.actamat.2011.09.051 ↗
55. K. Nakagawa, T. Yokota, and K. Seto: in Proceedings of the International Conference on New Developments in Advanced High-Strength Sheet Steels, AIST, Orlando, 2008, pp. 209–18.
56. S.G. Davidson, J.P. Wise, and J.G. Speer: in Proceedings of the 20th ASM Heat Treating Conference, ASM International, St. Louis, 2000, pp. 1144–1151.
57. K. Narita: Transactions ISIJ, 1975, vol. 15, pp. 145–51.10.2355/isijinternational1966.15.145 ↗
58. L. M. Rothleutner, R. Cryderman, and C. J. Van Tyne: Metallurgical and Materials Transactions A, 2014, vol. 45, pp. 4594–4609.10.1007/s11661-014-2375-1 ↗
59. F. Kurosawa, I. Taguchi, and R. Matsumoto: Journal of the Japan Institute of Metals and Materials, 1979, vol. 43, pp. 1068-1077.10.2320/jinstmet1952.43.11_1068 ↗
60. R.A. Grange, C.R. Hribal, and L.F. Porter, Metallurgical Transactions A, 1977, vol. 8A, pp. 1775-85.10.1007/BF02646882 ↗
61. G.R. Speich and W.C. Leslie, Metallurgical Transactions A, 1972, vol. 3, pp. 1043-54.10.1007/BF02642436 ↗
62. K.J. Irvine and F. B. Pickering: Journal of the Iron and Steel Institute, 1960, vol. 194, pp. 137-53.
63. N.C. Law and D. V. Edmonds: Metallurgical Transactions A, 1980, vol. 11A, p. 33-46.10.1007/BF02700436 ↗
64. G. M. Michal and I. E. Locci: Scripta Metallurgica, 1988, vol. 22, p. 1801-6.10.1016/S0036-9748(88)80288-6 ↗