journal article·2021-06Open access

Development of a Novel Ni-Based Multi-principal Element Alloy Filler Metal, Using an Alternative Melting Point Depressant

Liam Hardwick, Pat Rodgers, Ed Pickering, Russell Goodall

Abstract

Abstract Brazing is a crucial joining technology in industries where nickel-superalloy components must be joined. Nickel-based brazing filler metals are extensively employed, possessing excellent mechanical properties, corrosion resistance, and retained strength at elevated temperatures. To function as a filler metal, the alloy melting point must be reduced to below that of the materials being joined, but the addition of melting point depressants (MPDs) such as boron, silicon, and phosphorus can, however, lead to the formation of brittle intermetallics, potentially compromising the joint performance. In the present work, a novel multi-principal element brazing alloy (in the style of a high entropy alloy), utilizing Ge as an alternative MPD along with a reduced B addition, is investigated. The design process considered binary phase diagrams and predictions based on Thermo-Calc software and empirical thermodynamic parameters. The alloy was used to vacuum braze nickel-superalloy Inconel-718, and microstructural and mechanical investigations are reported. The maximum shear strength achieved was 297 MPa with a brazing temperature of 1100 °C and 60-minute hold time, with isothermal solidification completed. Shear strength was only slightly reduced with increased joint width. Assessments are made of the ability to accurately predict properties of multi-principle element alloys using Thermo-Calc software and empirical thermodynamic parameters.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. C. Briant & E. Hall: Welding Research Supplement, 1990, pp. 60–67.
2. D. Bose, A. Datta, A. Rabinkin & N. J. De Cristofaro: Welding Research Supplement, 1986, pp. 23–30.
3. [3] M. Salmaliyan & M. Shamanian: Heat and Mass Transfer, 2019, vol. 55(8), pp. 2083–2093.10.1007/s00231-018-2528-7 ↗
4. [4] X. J. Yuan, M. B. Kim & C. Y. Kang: Materials Science and Technology, 2011, vol. 27(7), pp. 1191–1197.10.1179/026708310X12668415533847 ↗
5. [5] M. Abdelfatah & O. A. Ojo: Materials Science and Technology, 2009, vol. 25(1), pp. 61–67.10.1179/174328407X185929 ↗
6. [6] W. F. Gale & D. A. Butts: Science and Technology of Welding and Joining, 2004, vol. 9(4), pp. 283–300.10.1179/136217104225021724 ↗
7. A. Ghasemi & M. Pouranvari: Science and Technology of Welding and Joining, vol. 23(5), pp. 441–448 (2019)10.1080/13621718.2017.1410341 ↗
8. [8] A. Amirkhani, B. Beidokhti, K. Shirvani, & M. R. Rahimipour: Journal of Materials Processing Technology, 2019, vol. 266, pp. 1–9.10.1016/j.jmatprotec.2018.10.008 ↗
9. [9] S. Ghaderi, F. Karimzadeh, & A. Ashrafi: Journal of Manufacturing Processes, 2020, vol. 49, pp. 162–174.10.1016/j.jmapro.2019.11.005 ↗
10. A. YarmouShamsabadi, R. Bakhtiari & B. G. Eisaabadi: Journal of Alloys and Compounds, 2016, vol. 685, pp. 896–904.10.1016/j.jallcom.2016.06.185 ↗
11. [11] J. Chen, V. Demers, E. L. Cadotte, D. Turner & P. Bocher: Journal of Materials Engineering and Performance, 2017, vol. 26(2), pp. 547–553.10.1007/s11665-016-2491-8 ↗
12. K. A. Rozman, M. A. Carl, M. Kapoor, N. Doğan, J. A. Hawk: Materials Science and Engineering A, 2019, vol. 768: 13847710.1016/j.msea.2019.138477 ↗
13. [13] S. Y. Wang, Y. Sun, X. Y. Hou, C. Y. Cui, X. F. Sun & Y. Z. Zhou: Materials Letters, 2020, vol. 258, pp. 12673010.1016/j.matlet.2019.126730 ↗
14. M. K. Dinkel, P. Heinz, F. Pyczak, A. Volek, M. Ott, E. Affeldt, A. Vossberg, M. Göken, R. F. Singer: TMS Proceedings of the International Symposium on Superalloys, 2008, pp. 211–20.10.7449/2008/Superalloys_2008_211_220 ↗
15. [15] B. Laux, S. Piegert & J. Rösler: Metallurgical and Materials Transactions A, 2009, vol. 40A, pp. 138–149.10.1007/s11661-008-9702-3 ↗
16. [16] J. W. Yeh, S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, S. Y. Chang: Advanced Engineering Materials, 2004, vol. 6(5), pp. 299-30310.1002/adem.200300567 ↗
17. [17] D. B. Miracle: Nature Communications, 2019, vol. 10(1), pp. 1–3.10.1038/s41467-019-09700-1 ↗
18. [18] P. –K. Huang, J. –W. Yeh, T. –T. Shun, S. –K. Chen: Advanced Engineering Materials, 2004, vol. 6(1), pp. 74-78.10.1002/adem.200300507 ↗
19. [19] D. B. Miracle & O. N. Senkov: Acta Materialia, 2017, vol. 122, pp. 448–511.10.1016/j.actamat.2016.08.081 ↗
20. [20] X. Gao, Y. Lu, B. Zhang, N. Liang, G. Wu, G. Sha, J. Liu & Y. Zhao: Acta Materialia, 2017, vol. 141, pp. 59–66.10.1016/j.actamat.2017.07.041 ↗
21. [21] Y. Zou, J. M. Wheeler, H. Ma, P. Okle & R. Spolenak: Nano Letters, 2017, vol. 17(3), pp. 1569–1574.10.1021/acs.nanolett.6b04716 ↗
22. [22] O. N. Senkov, J. M. Scott, S. V. Senkova, D. B. Miracle & C. F. Woodward: Journal of Alloys and Compounds, 2011, vol. 509(20), pp. 6043–6048.10.1016/j.jallcom.2011.02.171 ↗
23. [23] X. W. Qiu, Y. P. Zhang, L. He & C. G. Liu: Journal of Alloys and Compounds, 2013, vol. 549, pp. 195–199.10.1016/j.jallcom.2012.09.091 ↗
24. [24] C. Shang, E. Axinte, W. Ge, Z. Zhang & Y. Wang: Surfaces and Interfaces, 2017, vol. 9, pp. 36–43.10.1016/j.surfin.2017.06.012 ↗
25. [25] B. Gorr, M. Azim, H. J. Christ, T. Mueller, D. Schliephake & M. Heilmaier: Journal of Alloys and Compounds, 2015, vol. 624, pp. 270–278.10.1016/j.jallcom.2014.11.012 ↗
26. [26] D. Bridges, S. Zhang, S. Lang, M. Gao, Z. Yu, Z. Feng & A. Hu: Materials Letters, 2018, vol. 215, pp. 11-1410.1016/j.matlet.2017.12.003 ↗
27. W. Tillmann, L. Wojarski, M. Manka & C. Timmer: Proceedings from the International Brazing & Soldering Conference, 2018, pp. 142–48.
28. M. Gao, B. Schneiderman, S. M. Gilbert & Z. Yu: Metallurgical and Materials Transactions A, 2019, vol. 50(11), pp. 5117–5127.10.1007/s11661-019-05386-8 ↗
29. S. Jin, C. Leinenbach, J. Wang, L. I. Duarte, S. Delsante, G. Borzone, A. Scott & A. Watson: Calphad, 2012, vol. 38, pp. 23-34.10.1016/j.calphad.2012.03.003 ↗
30. [30] Y. Q. Liu & Y. Du: Computer Coupling of Phase Diagrams and Thermochemistry, 2010, vol. 34, pp. 25-36.
31. [31] H. Okamoto: Journal of Phase Equilibria and Diffusion, 2008, vol. 29, pp. 292.10.1007/s11669-008-9309-9 ↗
32. [32] G.V. Raynor & V.G. Rivlin: Phase Equilibria in Iron Ternary Alloys, The Institute of Metals, London, 1988, pp. 316-332.
33. [33] R. Rettig, S. Steuer & R. F. Singer: Journal of Phase Equilibria and Diffusion, 2011, vol. 32(3), pp. 198–205.10.1007/s11669-011-9853-6 ↗
34. [34] Y. Zhang, Y. J. Zhou, J. P. Lin, G. L. Chen & P. K. Liaw: Advanced Engineering Materials, 2008, vol. 10(6), pp. 534–538.10.1002/adem.200700240 ↗
35. [35] M. C. Troparevsky, J. R. Morris, Y. Wang, A. R. Lupini & G. Malcolm: Journal of the Minerals, Metals and Materials Society, 2015, vol. 67(10), pp. 2350–2363.10.1007/s11837-015-1594-2 ↗
36. [36] S. Guo, C. Ng, J. Lu & C. T. Liu: Journal of Applied Physics, 2011, vol. 109, pp. 103505.10.1063/1.3587228 ↗
37. [37] S. Guo & C. T. Liu: Progress in Natural Science: Materials International, 2011, vol. 21(6), pp. 433–446.10.1016/S1002-0071(12)60080-X ↗
38. K. Matsu, Y. Miyazawa, Y. Nishi & T. Ariga: Materials Transactions, vol. 48(5), pp. 1055–1059 (2007)10.2320/matertrans.48.1055 ↗
39. [39] W. C. Liu, M. Yao, Z. L. Chen & S. G. Wang: Journal of Materials Science, 1999, vol. 34, pp. 2583–2586.10.1023/A:1004648615561 ↗
40. [40] M. Pouranvari, A. Ekrami & A. H. Kokabi: Journal of Alloys and Compounds, 2013, vol. 563, pp. 143–149.10.1016/j.jallcom.2013.02.100 ↗
41. W. F. Gale & E. R. Wallach: Materials Science and Technology, 1991, vol. 7(12), pp. 1143–48.10.1179/mst.1991.7.12.1143 ↗
42. [42] O. A. Ojo, N. L. Richards & M. C. Chaturvedi: Science and Technology of Welding and Joining, 2004, vol. 9(6), pp. 532–540.10.1179/174329304X8702 ↗
43. T. B. Massalski, J. L. Murray & L. H. Bennet: Binary alloy phase diagrams: Volume 1 In ASM International, ASM, Metals Park, Ohio, 1986, pp. 366–71
44. [44] W. F. Gale & E. R. Wallach: Metallurgical Transactions A, 1991, vol. 22, pp. 2451–2457.10.1007/BF02665011 ↗
45. [45] I. Tuah-Poku, M. Dollar & T. B. Massalski: Metallurgical Transactions A, 1988, vol. 19, pp. 675–686.10.1007/BF02649282 ↗
46. M. Pouranvari, A. Ekrami & A.H. Kokabi: Mater. Sci. Technol. 2014, vol. 30(1), pp. 109–115.10.1179/1743284713Y.0000000320 ↗