Influence of Process Parameters on Microstructure Evolution During Hot Deformation of a Eutectic High-Entropy Alloy (EHEA)
Source abstract
Abstract
High-entropy alloys (HEAs) have shown unique combinations of strength and ductility along with other properties after optimized thermomechanical processing (TMP). In this study, the hot deformation of an AlCoCrFeNi2.1 eutectic high-entropy alloy (EHEA) was studied by using a Gleeble 3800® thermomechanical simulator at 800 °C, 1000 °C and 1200 °C deformation temperature under different strain rates of 10−4, 10−2, and 1 s−1. The influence of strain rate and temperature on the evolution of the microstructure was discussed. The apparent activation energy (Q), stress exponent (n) and Zener–Holloman parameter (Z) were determined from the true stress–strain curves to develop the constitutive equation. The activation energy was determined to be 336 kJ/mol, and the stress exponent (n) was 2.5. Microstructures, characterized using electron-backscattered diffraction (EBSD), were analyzed as a function of (Z) values and interpreted in terms of solute diffusion and the interactions between dynamic softening (dynamic recovery and dynamic recrystallization) and hardening (dynamic precipitation) phenomena. It was found that the hot deformation behavior of EHEAs was controlled by pipe diffusion for the selected process parameters. The pipe diffusion coefficient of Ni increased with increasing strain rate at constant deformation temperature, whereas the lattice diffusion coefficient remained constant for all the examined strain rates. Dynamic recovery (DRV) was the dominant softening mechanism at lower temperatures irrespective of strain rates, while dynamic precipitation played a critical role in the inhibition of dynamic recrystallization (DRX) under these conditions. At higher temperatures and for all the strain rates, microstructure evolution was controlled by the DRX mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299-303.10.1002/adem.200300567 ↗
2. J.W. Yeh, S.J. Lin, T.S. Chin, J.Y. Gan, S.K. Chen, T.T. Shun, C.H. Tsau and S.Y. Chou: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2533-36.10.1007/s11661-006-0234-4 ↗
3. J.W. Yeh: Ann. Chim-Sci. Mat., 2006, vol. 31, pp. 633-48.10.3166/acsm.31.633-648 ↗
4. J.W. Yeh, Y.L. Chen, S.J. Lin and S.K. Chen: Mater. Sci. Forum, 2007, vol. 560, pp. 1-9.10.4028/www.scientific.net/MSF.560.1 ↗
5. B. Cantor, I.T.H. Chang, P. Knight and A.J.B. Vincent, Mater. Sci. Eng. A, 2004, vol. 375, pp. 213-18.10.1016/j.msea.2003.10.257 ↗
6. Y. Zou, S. Maiti, W. Steurer and R. Spolenak: Acta Mater., 2014, vol. 65, pp. 85-97.10.1016/j.actamat.2013.11.049 ↗
7. M.J. Yao, K.G. Pradeep, C.C. Tasan and D. Raabe: Scripta Mater., 2014, vol. 72-73, pp. 5-8.10.1016/j.scriptamat.2013.09.030 ↗
8. Y.Y. Chen, U.T. Hong, J.W. Yeh and H.C. Shih: Scripta Mater., 2006, vol. 54, pp. 1997-2001.10.1016/j.scriptamat.2006.03.021 ↗
9. Y. Wang, Y. Yang, H. Yang, M. Zhang, S. Ma and J. Qiao: Mater. Chem. Phys., 2018, vol. 210, pp. 233-39.10.1016/j.matchemphys.2017.05.029 ↗
10. B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George and R.O. Ritchie: Science, 2014, vol. 345, pp. 1153-58.10.1126/science.1254581 ↗
11. L. Zhang, Y. Zhou, X. Jin, X. Du and B. Li: Scripta Mater., 2018, vol. 146, pp. 226-30.10.1016/j.scriptamat.2017.12.001 ↗
12. M.H. Tsai, J.W. Yeh and J.Y. Gan: Thin Solid Films, 2008, vol. 516, pp. 5527-30.10.1016/j.tsf.2007.07.109 ↗
13. K.Y. Tsai, M.H. Tsai and J.W. Yeh: Acta Mater., 2013, vol. 61, pp. 4887-97.10.1016/j.actamat.2013.04.058 ↗
14. A.C. Yeh, Y.J. Chang, C.W. Tsai, Y.C. Wang, J.W. Yeh and C.M. Kuo: Metall. Mater. Trans. A, 2014, vol. 45, pp. 184-90.10.1007/s11661-013-2097-9 ↗
15. K.Y. Tsai, M.H. Tsai and J.W. Yeh: Scripta Mater., 2017, vol. 135, pp. 158-59.10.1016/j.scriptamat.2017.03.028 ↗
16. W.R. Wang, W.L. Wang, S.C. Wang, Y.C. Tsai, C.H. Lai and J.W. Yeh: Intermetallics, 2012, vol. 26, pp. 44-51.10.1016/j.intermet.2012.03.005 ↗
17. J. Dąbrowa, W. Kucza, G. Cieślak, T. Kulik, M. Danielewski and J.W. Yeh: J. Alloys Compd., 2016, vol. 674, pp. 455-62.10.1016/j.jallcom.2016.03.046 ↗
18. M.H. Chuang, M.H. Tsai, W.R. Wang, S.J. Lin and J.W. Yeh: Acta Mater., 2011, vol. 59, pp. 6308-6317.10.1016/j.actamat.2011.06.041 ↗
19. Y.J. Chang and A.C. Yeh: J. Alloys Compd., 2015, vol. 653, pp. 379-85.10.1016/j.jallcom.2015.09.042 ↗
20. Y. Lu, Y. Dong, S. Guo, L. Jiang, H. Kang, T. Wang, B. Wen, Z. Wang, J. Jie, Z. Cao, H. Ruan and T. Li: Sci. Rep., 2014, vol. 4, pp. 1–5.
21. X. Gao, Y. Lu, B. Zhang, N. Liang, G. Wu, G. Sha, J. Liu and Y. Zhao: Acta Mater., 2017, vol. 141, pp. 59-66.10.1016/j.actamat.2017.07.041 ↗
22. P.P. Bhattacharjee, G.D. Sathiaraj, M. Zaid, J.R. Gatti, C. Lee, C.W. Tsai and J.W. Yeh: J. Alloys Compd., 2014, vol. 587, pp. 544-52.10.1016/j.jallcom.2013.10.237 ↗
23. G.D. Sathiaraj, P.P. Bhattacharjee, C.W. Tsai and J.W. Yeh: Intermetallics, 2016, vol. 69, pp. 1-9.10.1016/j.intermet.2015.10.005 ↗
24. G.D. Sathiaraj, C. Lee, C.W. Tsai, J.W. Yeh and P.P. Bhattacharjee: IOP Conf. Ser: Mater. Sci. Eng., 2015, vol. 82, pp. 1–4.10.1088/1757-899X/82/1/012068 ↗
25. I.S. Wani, T. Bhattacharjee, S. Sheikh, Y.P. Lu, S. Chatterjee, P.P. Bhattacharjee, S. Guo and N. Tsuji: Mater. Res. Lett., 2016, vol. 4, pp. 174-79.10.1080/21663831.2016.1160451 ↗
26. I.S. Wani, T. Bhattacharjee, S. Sheikh, I.T. Clark, M.H. Park, T. Okawa, S. Guo, P.P. Bhattacharjee and N. Tsuji: Intermetallics, 2017, vol. 84, pp. 42-51.10.1016/j.intermet.2016.12.018 ↗
27. Y. Zhang, X. Wang, J. Li, Y. Huang, Y. Lu and X. Sun: Mater. Sci. Eng. A, 2018, vol. 724, pp. 148-55.10.1016/j.msea.2018.03.078 ↗
28. S.R. Reddy, S. Yoshida, U. Sunkari, A. Lozinko, J. Joseph, R. Saha, D. Fabijanic, S. Guo, P.P. Bhattacharjee and N. Tsuji: Mater. Sci. Eng. A, 2019, vol. 764, pp. 1–12.10.1016/j.msea.2019.138226 ↗
29. S.R. Reddy, U. Sunkari, A. Lozinko, R. Saha, S. Guo and P.P. Bhattacharjee: Intermetallics, 2019, vol. 114, pp. 1–9.10.1016/j.intermet.2019.106601 ↗
30. R.R. Eleti, T. Bhattacharjee, L. Zhao, P.P. Bhattacharjee and N. Tsuji: Mater. Chem. Phys., 2018, vol. 210, pp. 176-186.10.1016/j.matchemphys.2017.06.062 ↗
31. J.Y. He, C. Zhu, D.Q. Zhou, W.H. Liu, T.G. Nieh and Z.P. Lu: Intermetallics, 2014, vol. 55, pp. 9-14.10.1016/j.intermet.2014.06.015 ↗
32. Y. Zhang, J. Li, J. Wang, S. Niu and H. Kou: Metals, 2016, vol. 6, pp. 1–11.10.3390/met6010001 ↗
33. M.R. Rahul, S. Samal, S. Venugopal and G. Phanikumar: J. Alloys Compd., 2018, vol. 749, pp. 1115-27.10.1016/j.jallcom.2018.03.262 ↗
34. George E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., New York, 1976, pp. 184–240.
35. H.J. McQueen, S. Spigarelli, M.E. Kassner and E. Evangelista: Hot Deformation and Processing of Aluminum Alloys. CRC Press, Boca Ranton, FL, 2016 pp. 301-47.10.1201/b11227 ↗
36. S.R. Reddy, S. Bapari, P.P. Bhattacharjee and A.H. Chokshi: Mater. Res. Lett., 2017, vol. 5, pp. 408-14.10.1080/21663831.2017.1305460 ↗
37. S. Guo, D. Li, H. Pen, Q. Guo and J. Hu, J. Nucl. Mater., 2011, vol. 410, pp. 52-58.10.1016/j.jnucmat.2010.12.309 ↗
38. Y.Q. Ji, S.D. Qu and W.X. Han, Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 88-94.10.1016/S1003-6326(15)63582-8 ↗
39. Y. Liu, R. Hu, J. Li, H. Kou, H. Li, H. Chang and H. Fu, Mater. Sci. Eng. A, 2008, vol. 497, pp. 283-89.10.1016/j.msea.2008.07.052 ↗
40. A. R. Mashreghi, H. Monajatizadeh, M. Jahazi and S. Yue, Mater. Sci. Technol., 2004, vol. 20, pp. 161-66.10.1179/026708304225010343 ↗
41. H. Monajati, A. K. Taheri, M. Jahazi and S. Yue, Metall. Mater. Trans. A, 2005, vol. 36, pp. 895-905.10.1007/s11661-005-0284-z ↗
42. M. Morakabati, Sh Kheirandish, M. Aboutalebi, A. Karimi Taheri and S. M. Abbasi, Mater. Sci. Eng. A, 2011, vol. 528, pp. 5656–63.10.1016/j.msea.2011.04.036 ↗
43. A. P. I. Popoolaa, K. M. Oluwasegun, O. E. Olorunniwo, P. O. Atanda and V. S. Aigbodion, J. Alloys Compd., 2016, vol. 666, pp. 482-92.10.1016/j.jallcom.2016.01.012 ↗
44. K. Sahithya, I. Balasundar, P. Pant, T. Raghu, H. Kumar Nandi, V. Singh, P. Ghosal and M. Ramakrishna, Mater. Sci. Eng. A, 2019, vol. 754, pp. 521–34.10.1016/j.msea.2019.03.083 ↗
45. Y. B. Tan, Y. H. Ma and F. Zhao, J. Alloys Compd., 2018, vol. 741, pp. 85-96.10.1016/j.jallcom.2017.12.265 ↗
46. A. Telang, A. S. Gill, S. R. Mannava, D. Qian and V. K. Vasudevan, Surf. Coat. Technol., 2018, vol. 344, pp. 93-101.10.1016/j.surfcoat.2018.02.094 ↗
47. A. Thomas, M. El-Wahabi, J. M. Cabrera and J. M. Prado, J. Mater. Process. Technol., 2006, vol. 177, pp. 469-72.10.1016/j.jmatprotec.2006.04.072 ↗
48. H. Yuan and W. C. Liu, Mater. Sci. Eng. A, 2005, vol. 408, pp. 281-89.10.1016/j.msea.2005.08.126 ↗
49. K. Chadha, Z. Ahmed, C. Aranas, D. Shahriari and M. Jahazi: Materialia, 2018, vol. 1, pp. 155-67.10.1016/j.mtla.2018.04.006 ↗
50. K. Chadha, D. Shahriari, C.J. Aranas, L.P. Lapierre-Boire and M. Jahazi: Met. Mater. Int., 2019, vol. 25, pp. 559-69.10.1007/s12540-018-00227-6 ↗
51. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier and B. C. D. Flipo: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2886-99.10.1007/s11661-017-4067-0 ↗
52. D. Samantaray, C. Phaniraj, S. Mandal and A.K. Bhaduri: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1071-77.10.1016/j.msea.2010.10.036 ↗
53. M.F. Ashby, R.A. Verrall, H.H. Schloessin, E.H. Rutter, K.H.G. Ashbee, S.H. White, S.A.F. Murrell and A. Kelly: Philos. Trans. Royal Soc. A, 1978, vol. 288, pp. 59-95.
54. H.J. Frost and M.F. Ashby: Deformation-mechanism maps: the plasticity and creep of metals and ceramics. 1st ed., Pergamon Press, Oxford, 1982, pp. 30–61.
55. D. Prokoshkina, V.A. Esin, G. Wilde and S.V. Divinski: Acta Mater., 2013, vol. 61, pp. 5188-97.10.1016/j.actamat.2013.05.010 ↗
56. C.M. Sellars, A. Kelly, A.H. Cook and G.W. Greenwood: Philos. Trans. Royal Soc. A, 1978, vol. 288, pp. 147-58.
57. H.J. McQueen and J.J. Jonas: in Treatise on Mater. Sci. Technol., ed. R. J. Arsenault Elsevier: 1975, pp 393–493.10.1016/B978-0-12-341806-7.50014-3 ↗
58. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena. 2nd ed., Elsevier Science, Oxford, UK, 2012, pp. 169-210.
59. P. Shi, W. Ren, T. Zheng, Z. Ren, X. Hou, J. Peng, P. Hu, Y. Gao, Y. Zhong and P.K. Liaw: Nat. Commun., 2019, vol. 10, pp. 1–8.10.1038/s41467-018-07882-8 ↗
60. C.M. Kamma and E. Hornbogen: Canadian Metallurgical Quarterly 1984, vol. 23, pp. 249-57.10.1179/cmq.1984.23.2.249 ↗
61. A.A. Hameda and L. Blaż: Scripta Mater., 1997, vol. 37, pp. 1987-93.10.1016/S1359-6462(97)00391-6 ↗