journal article·2020-01Open access

Local Deformation and Fracture Behavior of High-Strength Aluminum Alloys Under Hydrogen Influence

Kazuyuki Shimizu, Hiroyuki Toda, Kentaro Uesugi, Akihisa Takeuchi

Abstract

The local deformation and fracture behavior of high-Zn Al-Zn-Mg(-Cu) alloys under hydrogen influence were investigated by in situ tests through synchrotron X-ray tomography. Intergranular and quasi-cleavage fractures were induced by hydrogen, and strain localization by the presence of cracks was not observed by 3D strain mapping. This result suggests that the strain localization at the crack tip is smaller than the measurement limit of 3D strain mapping. The average crack-tip-opening displacements, which are one of the crack driving forces specified by fracture mechanics, directly measured from the tomographic slice were 0.14 and 0.23 μm for intergranular cracks and quasi-cleavage cracks, respectively. The crack driving force of the intergranular and quasi-cleavage cracks was small. The local deformation behavior at the crack tips was analyzed based on fracture mechanics. The local deformation field of the crack tip, which was characterized using the Rice-Drugan-Sham (RDS) solution rather than the Hutchinson-Rice-Rosengren (HRR) solution, was located within 20 μm of the crack tip, and its size was limited. The results of this work clarify that the intergranular and quasi-cleavage crack growth are caused by small driving forces; however, this behavior is not perfectly brittle, accompanying local deformation at the crack tip.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. R.G. Song, W. Dietzel, B.J. Zhang, W.J. Liu, M.K. Tseng, and A. Atrens: Acta Mater., 2004, vol. 52, pp. 4727–43.10.1016/j.actamat.2004.06.023 ↗
2. M.S. Bhuiyan, H. Toda, Z. Peng, S. Hang, K. Horikawa, K. Uesugi, A. Takeuchi, N. Sakaguchi, and Y. Watanabe: Mater. Sci. Eng. A, 2016, vol. 655, pp. 221–8.10.1016/j.msea.2015.12.092 ↗
3. M. Hirano, K. Kobayashi, and H. Tonda: J. Soc. Mater. Sci. Japan, 2000, vol. 49, pp. 86–91.10.2472/jsms.49.86 ↗
4. R. Braun: Materwiss. Werksttech., 2007, vol. 38, pp. 674–89.10.1002/mawe.200700204 ↗
5. D. Najjar, T. Magnin, and T.J. Warner: Influence of Critical Surface Defects and Localized Competition between Anodic Dissolution and Hydrogen Effects during Stress Corrosion Cracking of a 7050 Aluminium Alloy, vol. 238, 1997.10.1016/S0921-5093(97)00369-9 ↗
6. S. Osaki and S. Haruyama: J. Jpn. Inst. Light Met., 2013, vol. 63, pp. 57–64.10.2464/jilm.63.57 ↗
7. S. Osaki, J. Ikeda, K. Kinoshita, Y. Sasaki, and A.M. Si: J. Jpn. Inst. Light Met., 2006, vol. 56, pp. 721–7.10.2464/jilm.56.721 ↗
8. S. Kuramoto, J. Okahana, and M. Kanno: Mater. Trans., 2001, 42, vol. 42.10.2320/matertrans.42.2140 ↗
9. M.S. Bhuiyan, Y. Tada, H. Toda, S. Hang, K. Uesugi, A. Takeuchi, N. Sakaguchi, and Y. Watanabe: Int. J. Fract., 2016, vol. 200, pp. 13–29.10.1007/s10704-016-0092-z ↗
10. M. Wang, E. Akiyama, and K. Tsuzaki: Mater. Sci. Eng. A, 2005, vol. 398, pp. 37–46.10.1016/j.msea.2005.03.008 ↗
11. K. Takai and R. Watanuki: ISIJ Int., 2003, vol. 43, pp. 520–6.10.2355/isijinternational.43.520 ↗
12. H. Su, H. Toda, R. Masunaga, K. Shimizu, H. Gao, K. Sasaki, M.S. Bhuiyan, K. Uesugi, A. Takeuchi, and Y. Watanabe: Acta Mater., 2018, vol. 159, pp. 332–43.10.1016/j.actamat.2018.08.024 ↗
13. R.A. Oriani: Acta Metall., 1970, vol. 18, pp. 147–57.10.1016/0001-6160(70)90078-7 ↗
14. H. Toda, T. Hidaka, M. Kobayashi, K. Uesugi, A. Takeuchi, and K. Horikawa: Acta Mater., 2009, vol. 57, pp. 2277–90.10.1016/j.actamat.2009.01.026 ↗
15. M. Felberbaum and M. Rappaz: Acta Mater., 2011, vol. 59, pp. 6849–60.10.1016/j.actamat.2011.07.005 ↗
16. P.D. Lee and J.D. Hunt: Acta Mater., 2001, vol. 49, pp. 1383–98.10.1016/S1359-6454(01)00043-X ↗
17. H. Toda, H. Oogo, K. Horikawa, K. Uesugi, A. Takeuchi, Y. Suzuki, M. Nakazawa, Y. Aoki, and M. Kobayashi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 765–76.10.1007/s11661-013-2013-3 ↗
18. W.Y. Choo and J.Y. Lee: Metall. Trans. A, 1982, vol. 13, pp. 135–40.10.1007/BF02642424 ↗
19. P. Chao and R.A. Karnesky: Mater. Sci. Eng. A, 2016, vol. 658, pp. 422–8.10.1016/j.msea.2016.02.003 ↗
20. S.W. Smith and J.R. Scully: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 179–93.10.1007/s11661-000-0064-8 ↗
21. T. Enomoto, R. Matsumoto, S. Taketomi, and N. Miyazaki: Zair. Soc. Mater. Sci. Japan, 2010, vol. 59, pp. 596–603.10.2472/jsms.59.596 ↗
22. K. Horikawa and K. Yoshida: Mater. Trans., 2004, vol. 45, pp. 315–8.10.2320/matertrans.45.315 ↗
23. K. Horikawa, H. Okada, H. Kobayashi, and W. Urushihara: Mater. Trans., 2009, vol. 50, pp. 759–64.10.2320/matertrans.MRA2008325 ↗
24. H. Matsunaga, T. Usuda, K. Yanase, and M. Endo: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1315–26.10.1007/s11661-013-2109-9 ↗
25. T. Izumi and G. Itoh: Mater. Sci. Forum, 2007, vol. 539–543, pp. 475–80.10.4028/www.scientific.net/MSF.539-543.475 ↗
26. K. Ichitani, M. Kanno, and S. Kuramoto: ISIJ Int., 2003, vol. 43, pp. 496–504.10.2355/isijinternational.43.496 ↗
27. I.M. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross, and K.E. Nygren: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2323–41.10.1007/s11661-015-2836-1 ↗
28. M. Yamaguchi, K.I. Ebihara, M. Itakura, T. Kadoyoshi, T. Suzudo, and H. Kaburaki: in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 42, Springer US, 2011, pp. 330–9.
29. M. Yamaguchi, J. Kameda, K.-I. Ebihara, M. Itakura, and H. Kaburaki: Philos. Mag., 2012, vol. 92, pp. 1349–68.10.1080/14786435.2011.645077 ↗
30. Y. Mine, T. Tsumagari, and Z. Horita: Scr. Mater., 2010, vol. 63, pp. 552–5.10.1016/j.scriptamat.2010.05.027 ↗
31. M. Nagumo: Mater. Sci. Technol., 2004, vol. 20, pp. 940–50.10.1179/026708304225019687 ↗
32. T. Neeraj, R. Srinivasan, and J. Li: Acta Mater., 2012, vol. 60, pp. 5160–71.10.1016/j.actamat.2012.06.014 ↗
33. M.L. Martin, J. A. Fenske, G.S. Liu, P. Sofronis, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–06.10.1016/j.actamat.2010.11.024 ↗
34. H. Toda, K. Shimizu, K. Uesugi, Y. Suzuki, and M. Kobayashi: Mater. Trans., 2010, vol. 51, pp. 2045–8.10.2320/matertrans.L-M2010819 ↗
35. M. Kobayashi, H. Toda, Y. Kawai, T. Ohgaki, K. Uesugi, D.S. Wilkinson, T. Kobayashi, Y. Aoki, and M. Nakazawa: Acta Mater., 2008, vol. 56, pp. 2167–81.10.1016/j.actamat.2007.12.058 ↗
36. H. Su, T. Yoshimura, H. Toda, M.S. Bhuiyan, K. Uesugi, A. Takeuchi, N. Sakaguchi, and Y. Watanabe: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 6077–89.10.1007/s11661-016-3773-3 ↗
37. T. Ishikawa and R.B. McLellan: Acta Metall., 1986, vol. 34, pp. 1091–5.10.1016/0001-6160(86)90219-1 ↗
38. Japan Institute of Light Metals, ed.: Structures and Properties of Aluminum, Tokyo, 1991.
39. J.R. Scully, G.A. Young, and S.W. Smith: in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies: The Problem, its Characterisation and Effects on Particular Alloy Classes, Woodhead Publishing, 2012, pp. 707–68.10.1533/9780857093899.3.707 ↗
40. M. Yamaguchi, T. Tsuru, K. Ebihara, and M. Itakura: J. Jpn. Inst. Light Met., 2018, vol. 68, pp. 588–95.10.2464/jilm.68.588 ↗
41. A. Takeuchi, K. Uesugi, Y. Suzuki, S. Itabashi, and M. Oda: J. Synchrotron Rad, 2017, vol. 24, pp. 586–94.10.1107/S1600577517003289 ↗
42. A. Takeuchi, K. Uesugi, and Y. Suzuki: J. Phys. Conf. Ser., 2017, vol. 849, p. 012055.10.1088/1742-6596/849/1/012055 ↗
43. H. Toda, S. Yamamoto, M. Kobayashi, K. Uesugi, and H. Zhang: Acta Mater., 2008, vol. 56, pp. 6027–39.10.1016/j.actamat.2008.08.022 ↗
44. W.E. Lorensen, H.E. Cline, W.E. Lorensen, and H.E. Cline: in Proceedings of the 14th annual conference on Computer graphics and interactive techniques - SIGGRAPH ’87, vol. 21, ACM Press, New York, New York, USA, 1987, pp. 163–9.10.1145/37402.37422 ↗
45. M. Yamaguchi, K.-I. Ebihara, M. Itakura, T. Tsuru, K. Matsuda, and H. Toda: Comput. Mater. Sci., 2019, vol. 156, pp. 368–75.10.1016/j.commatsci.2018.10.015 ↗
46. H. Toda, P.C.C. Qu, S. Ito, K. Shimizu, K. Uesugi, A. Takeuchi, Y. Suzuki, and M. Kobayashi: Int. J. Cast Met. Res., 2014, vol. 27, pp. 369–77.10.1179/1743133614Y.0000000123 ↗
47. P.N. Anyalebechi: Cast Met., 2016, vol. 3, pp. 182–201.10.1080/09534962.1990.11819039 ↗
48. M.S.I.T. MSIT®: in Light Metal Systems. Part 3, Springer-Verlag, Berlin/Heidelberg, pp. 1–21.
49. T. Izumi and G. Itoh: Mater. Trans., 2011, vol. 52, pp. 130–4.10.2320/matertrans.L-M2010825 ↗
50. G.A. Young and J.R. Scully: Acta Mater., 1998, vol. 46, pp. 6337–49.10.1016/S1359-6454(98)00333-4 ↗
51. H. Toda, Z.A.B. Shamsudin, K. Shimizu, K. Uesugi, A. Takeuchi, Y. Suzuki, M. Nakazawa, Y. Aoki, and M. Kobayashi: Acta Mater., 2013, vol. 61, pp. 2403–13.10.1016/j.actamat.2013.01.012 ↗
52. Y.S. Chen, D. Haley, S.S.A. Gerstl, A.J. London, F. Sweeney, R.A. Wepf, W.M. Rainforth, P.A.J. Bagot, and M.P. Moody: Science, 2017, vol. 355, pp. 1196–9.10.1126/science.aal2418 ↗
53. J. Takahashi, K. Kawakami, and Y. Kobayashi: Acta Mater., 2018, vol. 153, pp. 193–204.10.1016/j.actamat.2018.05.003 ↗
54. H. Saitoh, Y. Iijima, and K. Hirano: J. Mater. Sci., 1994, vol. 29, pp. 5739–44.10.1007/BF00349974 ↗
55. F.G. Wei, T. Hara, and K. Tsuzaki: Metall. Mater. Trans. B, 2004, vol. 35, pp. 587–97.10.1007/s11663-004-0057-x ↗
56. D. Nguyen, A.W. Thompson, and I.M. Bernstein: Acta Metall., 1987, vol. 35, pp. 2417–25.10.1016/0001-6160(87)90139-8 ↗
57. H. Gao, H. Su, K. Shimizu, C. Kadokawa, H. Toda, Y. Terada, K. Uesugi, and A. Takeuchi: Mater. Trans., 2018, vol. 59, pp. 1532–5.10.2320/matertrans.M2018156 ↗
58. T. Tsuru, M. Yamaguchi, H. Toda, and K. Shimizu: unpublished work.
59. P. Sofronis and R.M. McMeeking: J. Mech. Phys. Solids, 1989, vol. 37, pp. 317–50.10.1016/0022-5096(89)90002-1 ↗
60. K. Hirayama, Y. Sek, T. Suzuki, H. Toda, K. Uesugi, A. Takeuchi, and W. Ludwig: in preparation.
61. H. Toda, E. Maire, S. Yamauchi, H. Tsuruta, T. Hiramatsu, and M. Kobayashi: Acta Mater., 2011, vol. 59, pp. 1995–2008.10.1016/j.actamat.2010.11.065 ↗
62. J.R. RICE, W.J. DRUGAN, and T.L. SHAM: Astm Stp 700, 1980, pp. 189–221.
63. K.S. Chan: Metall. Trans. A, 1990, vol. 21, pp. 81–6.10.1007/BF02656426 ↗
64. K.S. Chan: Acta Metall., 1989, vol. 37, pp. 1217–26.10.1016/0001-6160(89)90116-8 ↗
65. T. Ogura, T. Otani, A. Hirose, and T. Sato: Mater. Sci. Eng. A, 2013, vol. 580, pp. 288–93.10.1016/j.msea.2013.05.025 ↗