The Effect of Scan Length on the Structure and Mechanical Properties of Electron Beam-Melted Ti-6Al-4V
Source abstract
Abstract
Electron beam melting (EBM) is a powder bed fusion-based additive manufacturing process in which selective areas of a layer of powder are melted with an electron beam and a part is built layer by layer. EBM scanning strategies within the Arcam AB® A2X EBM system rely upon governing relationships between the scan length of the beam path, the beam current, and speed. As a result, a large parameter process window exists for Ti-6Al-4V. Many studies have reviewed various properties of EBM materials without accounting for this effect. The work performed in this study demonstrates the relationship between scan length and the resulting density, microstructure, and mechanical properties of EBM-produced Ti-6Al-4V using the scanning strategies set by the EBM control software. This emphasizes the criticality of process knowledge and careful experimental design, and provides an alternate explanation for reported orientation-influenced strength differences.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. ISO/ASTM Standard 52921, 2013, ASTM International, West Conshohocken, PA, 2013.
2. M. Svensson: Arcam AB, Molndal Sweden, unpublished research, 2011.
3. M. Svensson: Arcam AB, Molndal Sweden, unpublished research, 2012.
4. B.S. Bass: North Carolina State University, Raleigh, North Carolina, unpublished research 2008.
5. H.K. Rafi, N.V. Karthik, T.L. Starr, and B.E. Stucker: Solid Freeform Fabr. Symp. Proc., 2012, vol. 22, pp. 526–35.
6. U. Ackelid and M. Svensson: Mater. Sci. Technol. Conf. Exhib., 2009, vol. 4, pp. 2711–19.
7. A.A. Antonysamy: University of Manchester, Manchester, United Kingdom, unpublished research, 2012.
8. H. Suo, Z. Chen, J. Liu, S. Gong, and J. Xiao: Rare Metal Mater. Eng., 2014, vol. 43–4, pp. 780–85.10.1016/S1875-5372(14)60083-7 ↗
9. S.S. Al-Bermani, M.L. Blackmore, W. Zhang, and I. Todd: Metall. Trans. A, 2010, vol. 41–13, pp. 3422–34.10.1007/s11661-010-0397-x ↗
10. X. Tan, Y. Kok, Y.J. Tan, M. Descoins, D. Mangelinck, S.B. Tor, and C.K. Chua: Acta Mater., 2015, vol. 97, pp. 1–16.10.1016/j.actamat.2015.06.036 ↗
11. L. Murr, S. Gaytan, F. Medina, E. Martinez, D. Hernandez, L. Martinez, M. Lopez, R. Wicker, S. Collins, and Arcam A.B.: Solid Freeform Fabr. Symp. Proc., 2009, vol. 20, pp. 3–5.
12. N. Hrabe and T. Quinn: Mater. Sci. Eng., A, 2013, vol. 573, pp. 264–70.10.1016/j.msea.2013.02.064 ↗
13. N. Hrabe and T. Quinn: Mater. Sci. Eng., A, 2013, vol. 573, pp. 271–77.10.1016/j.msea.2013.02.065 ↗
14. L. Ladani: Metall. Trans. A, 2015, vol. 46–9, 3835–41.10.1007/s11661-015-2965-6 ↗
15. W. Everhart, E. Sawyer, T. Neidt, J. Dinardo, and B. Brown: J. Mater. Sci., 2016, vol. 51, pp. 1–10.10.1007/s10853-015-9702-9 ↗
16. ASTM Standard E8, 2015, “Standard Test Methods for Tension Testing of Metallic Materials,” ASTM International, West Conshohocken, PA, doi: 10.1520/E0008-15A, www.astm.org.10.1520/E0008-15A ↗
17. ASTM Standard E4, 2014, ASTM International, West Conshohocken, PA, doi: 10.1520/E0004-14, www.astm.org.10.1520/E0004-14 ↗
18. ASTM Standard E83, 2010, ASTM International, West Conshohocken, PA, doi: 10.1520/E0083-10A, www.astm.org.10.1520/E0083-10A ↗
19. ASTM Standard B962, 2015, ASTM International, West Conshohocken, PA, 2015, doi: 10.1520/B0962-15, www.astm.org.10.1520/B0962-15 ↗
20. J.R. Davis, P. Allen, S. Lampman, T.B. Zorc, S.D. Henry, J.L. Daquila, and A.W. Ronke (Eds.): Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM International, Conshohocken, PA, 1990, vol. 2, pp. 592–633.