journal article·2005-03

Precipitate effects on the mechanical behavior of aluminum copper alloys: Part II. Modeling

H. Sehitoglu, T. Foglesong, H. J. Maier

Publisher page

Abstract

This work focuses on a new hardening formulation accounting for precipitate-induced anisotropy in a binary aluminum-copper precipitation-hardened alloy. Different precipitates were developed upon aging at 190°C and 260°C, and corresponding work hardening characteristics were predicted for single and polycrystals. The use of single crystals facilitated the demonstration of the effect of precipitates on the flow anisotropy behavior. Pure aluminum was also studied to highlight the change in deformation mechanisms due to the introduction of precipitates in the matrix. The influence of precipitate-induced anisotropy on single-crystal flow behavior was clearly established, again relating to the precipitate character. Simulations are presented for several single-crystal orientations and polycrystals, and they display good agreement with experiments. The work demonstrates that precipitate-induced anisotropy can dominate over the crystal anisotropy effects in some cases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. H. Sehitoglu, X. Qing, T.J. Smith, H.J. Maier, and J.A. Allison: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 139–51.10.1007/s11661-000-0060-z ↗
2. T.J. Foglesong, H. Sehitoglu, and H.J. Maier: J. Phys. IV, 2003, vol. 105, pp. 239–46.10.1051/jp4:20030193 ↗
3. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
4. J.F.W. Bishop, and R. Hill: Phil. Mag., 1951, vol. 42, pp. 414–27.10.1080/14786445108561065 ↗
5. B. Budiansky, and T.T. Wu: Proc. 4th U.S. Nat. Congr. on Applied Mechanics, 1962, vol. 2, pp. 1175–85.
6. W.F. Hosford, and R.H. Zeisloft: Metall. Trans., 1972, vol. 3, pp. 113–21.10.1007/BF02680590 ↗
7. P. Bate, W.T. Roberts, and D.V. Wilson: Acta Metall., 1981, vol. 29 (11), pp. 1797–1814.10.1016/0001-6160(81)90106-1 ↗
8. F. Barlat, and J. Liu: Mater. Sci. Eng. A: Struct. Mater. Prop. Microstr. Processing. 1998, vol. A 257, pp. 47–61.10.1016/S0921-5093(98)00823-5 ↗
9. P. Sainfort, X. Dufaure de Citres, Y. Brechet, P. Lipinski, and M. Berveiller: Proc. 3rd Int. Conf. on Aluminium Alloys, Trondheim, Norway, 1992, pp. 483–88.
10. E. Arzt: Acta Mater, 1998, vol. 46 (16), pp. 5611–26.10.1016/S1359-6454(98)00231-6 ↗
11. R.A. Lebensohn, and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41 (9), pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
12. C.N. Tomé: Modelling Simulation in Mater. Sci. Eng., 1999, vol. 7, pp. 723–38.10.1088/0965-0393/7/5/305 ↗
13. R.A. Lebensohn, and C.N. Tomé: Mater. Sci. Eng. A: Struc. Mater.: Prop. Microstr. Processing, 1994, vol. A, 175, pp. 71–82.10.1016/0921-5093(94)91047-2 ↗
14. I. Karaman, H. Sehitoglu, A.J. Beaudoin, Y.I. Chumlyahov, H.J. Maier, and C.N. Tomé: Acta Mater, 2000, vol. 48 (13), pp. 3311–26.10.1016/S1359-6454(00)00153-1 ↗
15. J.D. Eshelby: Proc. R. Soc., London, 1957, vol.A241, p. 398.
16. J.D. Eshelby: Proc. Progress in Solid Mechanics, North-Holland, 1961, pp. 89–140.
17. Y. Estrin, and H Mecking: Acta Metall. 1984, vol. 32 (1), pp. 57–70.10.1016/0001-6160(84)90202-5 ↗
18. H. Mecking and Y. Estrin: Proc. Constitutive Relations and Their Physical Basis: Proc. 8th Risø Int. Symp. on Metallurgy and Materials Science, Risø National Laboratory, Roskilde, Denmark, 1987, pp. 123–45.
19. H. Mecking, and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
20. A. Acharya, and A.J. Beaudoin: J. Mech. Phys. Solids, 2000, vol. 48 (10), pp. 2213–30.10.1016/S0022-5096(00)00013-2 ↗
21. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537–62.
22. M.T. Lyttle, and J.A. Wert: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1283–88.10.1007/s11661-999-0277-4 ↗
23. H. Fujita, and T. Tabata: Acta Metall., 1973 vol. 21, pp. 355–65.10.1016/0001-6160(73)90191-0 ↗
24. T. Tabata, S. Yamanaka, and H. Fujita: Acta Metall., 1978, vol. 26, pp. 405–11.10.1016/0001-6160(78)90167-0 ↗
25. H.K. Hardy: J. Inst. Met., 1951, vol. 79, pp. 321–69.