Alloy Composition and Dendrite Arm Spacing in Al-Si-Cu-Mg-Fe Alloys
Source abstract
Abstract
Six Al-Si-Cu-Mg-(Fe/Mn) alloys with two levels of each of Cu, Si, and Fe/Mn were cast in the form of quasi-directionally solidified plates. The secondary dendrite arm spacing (SDAS) was measured as a function of the distance from the chill end for each composition and related to the local cooling rate as determined by thermocouples embedded in one of the cast plates. For a given cooling rate, Si has a strong, consistently refining effect on the SDAS per unit of solute content. Cu showed its strongest refining effect at low-Si and high-Fe contents. It is argued that the scale of the SDAS is determined by a combination of five main factors: constitutional undercooling; the fraction of Al-Si eutectic; and the amount, morphology, and distribution of the various intermetallic phases. The first two factors affect the early stages of the dendrite structure and SDAS formation, whereas the ones involving intermetallics affect the dendrite-coarsening mechanisms in the post-eutectic stage. The latter ones are more sensitive to cooling rate than the ones involving solute in solution. The scales of both, SDAS and intermetallics, can be predetermined to a measurable extent through the solute content to best suit particular casting conditions. (C) The Minerals, Metals & Materials Society and ASM International 2013
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. L. Bäckerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, AFS/Skanaluminium Publications, Des Plaines, IL, 1990.
2. N.L.M. Veldman, A.K. Dahle, D.H. StJohn, and L. Arnberg: Metall. Mater. Trans. A 2001, vol. 32A, pp. 147-55.10.1007/s11661-001-0110-1 ↗
3. M. Easton, C. Davidson, and D. StJohn: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1528-38, DOI:10.1007/s11661-010-0183-9.10.1007/s11661-010-0183-9 ↗
4. F. Grosselle, F. Bonollo, G. Timelli, A. Tiziani, and E. Della Corte: Metall. Ital. 2009, vol. 1, pp. 25-32.10.1039/b813121j ↗
5. M. Easton, C. Davidson, and D. StJohn: Mater. Trans., 2011, vol. 52, pp. 842-47, DOI:10.2320/matertrans.L-MZ201118.10.2320/matertrans.L-MZ201118 ↗
6. K. Young and D. Kerkwood: Metall. Trans. A 1975, vol. 6, pp. 197-205, DOI:10.1007/bf02673688.10.1007/bf02673688 ↗
7. Juan He, Jian Min Zeng, and Along Yan: Adv. Mater. Res. 2008, vol. 51, pp. 85-92.10.4028/www.scientific.net/AMR.51.85 ↗
8. Q.S. Hamed and R. Elliott: Cast Met. 1993, vol. 6, pp. 36-41.10.1080/09534962.1993.11819124 ↗
9. Q.S. Hamed and R. Elliott: Cast Met. 1993, vol. 6, pp. 42-46.10.1080/09534962.1993.11819125 ↗
10. Q.S. Hamed and R. Elliott: Cast Met. 1993, vol. 6, pp. 47-53.10.1080/09534962.1993.11819126 ↗
11. S. Boontein, N. Srisukhumbovornchai, J. Kajornchaiyakul, and C. Limmaneevichitr: Int. J. Cast Met. Res. 2011, vol. 24, pp. 108-12.10.1179/1743133610Y.0000000007 ↗
12. R.N. Grugel: J. Mater. Sci. 1993, vol. 28, pp. 677-83, 10.1007/bf01151244.10.1007/BF01151244 ↗
13. R.E. Spear and G.R. Gardner: Trans. AFS 1960, vol. 68, pp. 36-44.
14. L. Liu, A.M. Samuel, F.H. Samuel, H.W. Doty, and S. Valtierra: J. Mater. Sci. 2004, vol. 39, pp. 215-24, 10.1023/b:jmsc.0000007747.43275.34.10.1023/B:JMSC.0000007747.43275.34 ↗
15. [15] C.H. Caceres and J.A. Taylor: Metall. Mater. Trans. B 2006, vol. 37B, pp. 897-903, DOI:10.1007/BF02735011.10.1007/BF02735011 ↗
16. M. Easton, C. Davidson, and D. StJohn: Proceedings of the 12th International Conference on Aluminium Alloys, The Japan Institute of Light Metals, Tokyo, 2010, pp. 173–78.
17. J. Kaneko: J. Mater. Sci. 1977, vol. 12, pp. 1392-1400, 10.1007/bf00540853.10.1007/BF00540853 ↗
18. [18] J. Horwath and L. Mondolfo: Acta Metallurgica 1962, vol. 10, pp. 1037-42.10.1016/0001-6160(62)90072-X ↗
19. V. Ronto and A. Roosz: Int. J. Cast Met. Res., 2001, vol. 14, pp. 131–35.
20. C.H. Caceres, I.L. Svensson, and J.A. Taylor: Int. J. Cast Met. Res., 2003, vol. 15, pp. 531-43.10.1080/13640461.2003.11819539 ↗
21. C.H. Cáceres, B. Johannesson, J.A. Taylor, A. Canales-Nunez, M. Cardoso, and J. Talamantes: Shape casting: 2nd International Symposium, TMS, The Minerals, Metals & Materials Society, Warrendale, 2007.
22. C.H. Caceres and J.A. Taylor: Shaping Casting: The John Campbell Symposium, vol. 1, TMS, San Francisco, 2005, pp. 245–54.
23. C.H. Caceres and Q.G. Wang: Int. J. Cast Met. Res., 1996, vol. 9, pp. 157-62.10.1080/13640461.1996.11819656 ↗
24. J.A. Taylor: 35th Australian Foundry Institute National Conference, Cooperative Research Centre for Cast Metals Manufacturing (CAST), vol. 1, The University of Queensland, Brisbane, Australia, 2004, pp. 148–157.
25. J.A. Taylor: PhD. Thesis, The University of Queensland, Australia, 1997, p. 365.
26. M.O. Otte: PhD. Thesis, The University of Queensland, Australia, 2000, p. 219.
27. L.A. Dobrzański, M. Król, and T. Tański: J. Achiev. Mater. Manuf. Eng., 2010, vol. 43(2), pp. 613-33.
28. R.E. Spear and G.R. Gardner: Trans. Am. Found. Soc., 1963, vol. 71, pp. 209-215.
29. [29] Z. Li, A.M. Samuel, F.H. Samuel, C. Ravindran, and S. Valtierra: J. Mater. Sci., 2003, vol. 38, pp. 1203-18, 10.1023/a:1022857703995.10.1023/A:1022857703995 ↗
30. T. Sivarupan, C.H Caceres, and J.A. Taylor, eds.: 6th International Light Metal Technology Conference, Materials Science Forum, Trans Tech Publications, Switzerland, 2013, in press.
31. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications, Aedermannsdorf, 1989.
32. K. Radhakrishna and S. Seshan: AFS Trans., 1981, vol. 89, pp. 437-44.
33. C.H. Caceres and Q.G. Wang: AFS Trans., 1996, vol. 104, pp. 1039-43.
34. N. Tsumagari, C.E. Mobley, and P.R. Gangasani: AFS Trans., 1993, vol. 101, pp. 335-41.